r8169: select MII in Kconfig

[linux-2.6-omap-h63xx.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8a03875ec8779505ca6846f38501eb812c3766c6..8d222e470569a9259ce421404d371fe73ff423ce 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -510,14 +510,15 @@ config STNIC
 config SH_ETH
        tristate "Renesas SuperH Ethernet support"
        depends on SUPERH && \
-               (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763)
+               (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
+                CPU_SUBTYPE_SH7619)
        select CRC32
        select MII
        select MDIO_BITBANG
        select PHYLIB
        help
          Renesas SuperH Ethernet device driver.
-         This driver support SH7710, SH7712 and SH7763.
+         This driver support SH7710, SH7712, SH7763 and SH7619.
 
 config SUNLANCE
        tristate "Sun LANCE support"
@@ -821,14 +822,14 @@ config ULTRA32
          will be called smc-ultra32.
 
 config BFIN_MAC
-       tristate "Blackfin 527/536/537 on-chip mac support"
-       depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+       tristate "Blackfin on-chip MAC support"
+       depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
        select CRC32
        select MII
        select PHYLIB
        select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
        help
-         This is the driver for blackfin on-chip mac device. Say Y if you want it
+         This is the driver for Blackfin on-chip mac device. Say Y if you want it
          compiled into the kernel. This driver is also available as a module
          ( = code which can be inserted in and removed from the running kernel
          whenever you want). The module will be called bfin_mac.
@@ -1171,7 +1172,7 @@ config ETH16I
 
 config NE2000
        tristate "NE2000/NE1000 support"
-       depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+       depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
        select CRC32
        ---help---
          If you have a network (Ethernet) card of this type, say Y and read
@@ -1839,6 +1840,17 @@ config NE_H8300
          Say Y here if you want to use the NE2000 compatible
          controller on the Renesas H8/300 processor.
 
+config ATL2
+       tristate "Atheros L2 Fast Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       help
+         This driver supports the Atheros L2 fast ethernet adapter.
+
+         To compile this driver as a module, choose M here.  The module
+         will be called atl2.
+
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
@@ -2045,6 +2057,7 @@ config R8169
        tristate "Realtek 8169 gigabit ethernet support"
        depends on PCI
        select CRC32
+       select MII
        ---help---
          Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
 
@@ -2301,6 +2314,18 @@ config ATL1E
          To compile this driver as a module, choose M here.  The module
          will be called atl1e.
 
+config JME
+       tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         This driver supports the PCI-Express gigabit ethernet adapters
+         based on JMicron JMC250 chipset.
+
+         To compile this driver as a module, choose M here. The module
+         will be called jme.
+
 endif # NETDEV_1000
 
 #
@@ -2376,10 +2401,18 @@ config EHEA
          To compile the driver as a module, choose M here. The module
          will be called ehea.
 
+config ENIC
+       tristate "E, the Cisco 10G Ethernet NIC"
+       depends on PCI && INET
+       select INET_LRO
+       help
+         This enables the support for the Cisco 10G Ethernet card.
+
 config IXGBE
        tristate "Intel(R) 10GbE PCI Express adapters support"
        depends on PCI && INET
        select INET_LRO
+       select INTEL_IOATDMA
        ---help---
          This driver supports Intel(R) 10GbE PCI Express family of
          adapters.  For more information on how to identify your adapter, go
@@ -2495,6 +2528,15 @@ config BNX2X
          To compile this driver as a module, choose M here: the module
          will be called bnx2x.  This is recommended.
 
+config QLGE
+       tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+       depends on PCI
+       help
+         This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called qlge.
+
 source "drivers/net/sfc/Kconfig"
 
 endif # NETDEV_10000