Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6

[linux-2.6-omap-h63xx.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4a11296a951438df0730456206473bc40b363059..0b71ebc074b68cc1bd90c50b185e8d6a0eb74956 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -464,6 +464,12 @@ config MIPS_JAZZ_SONIC
          This is the driver for the onboard card of MIPS Magnum 4000,
          Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
 
+config XTENSA_XT2000_SONIC
+       tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+       depends on XTENSA_PLATFORM_XT2000
+       help
+         This is the driver for the onboard card of the Xtensa XT2000 board.
+
 config MIPS_AU1X00_ENET
        bool "MIPS AU1000 Ethernet support"
        depends on SOC_AU1X00
@@ -1386,7 +1392,8 @@ config FORCEDETH_NAPI
 
 config CS89x0
        tristate "CS89x0 support"
-       depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
+       depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
+               || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
        ---help---
          Support for CS89x0 chipset based Ethernet cards. If you have a
          network (Ethernet) card of this type, say Y and read the
@@ -1397,6 +1404,11 @@ config CS89x0
          To compile this driver as a module, choose M here. The module
          will be called cs89x0.
 
+config CS89x0_NONISA_IRQ
+       def_bool y
+       depends on CS89x0 != n
+       depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
+
 config TC35815
        tristate "TOSHIBA TC35815 Ethernet support"
        depends on NET_PCI && PCI && MIPS
@@ -1813,7 +1825,7 @@ config FEC2
 
 config FEC_MPC52xx
        tristate "MPC52xx FEC driver"
-       depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
+       depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
        select CRC32
        select PHYLIB
        ---help---
@@ -1840,6 +1852,17 @@ config NE_H8300
          Say Y here if you want to use the NE2000 compatible
          controller on the Renesas H8/300 processor.
 
+config ATL2
+       tristate "Atheros L2 Fast Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       help
+         This driver supports the Atheros L2 fast ethernet adapter.
+
+         To compile this driver as a module, choose M here.  The module
+         will be called atl2.
+
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
@@ -1927,15 +1950,6 @@ config E1000
          To compile this driver as a module, choose M here. The module
          will be called e1000.
 
-config E1000_DISABLE_PACKET_SPLIT
-       bool "Disable Packet Split for PCI express adapters"
-       depends on E1000
-       help
-         Say Y here if you want to use the legacy receive path for PCI express
-         hardware.
-
-         If in doubt, say N.
-
 config E1000E
        tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
        depends on PCI && (!SPARC32 || BROKEN)
@@ -2046,6 +2060,7 @@ config R8169
        tristate "Realtek 8169 gigabit ethernet support"
        depends on PCI
        select CRC32
+       select MII
        ---help---
          Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
 
@@ -2262,7 +2277,7 @@ config UGETH_TX_ON_DEMAND
 config MV643XX_ETH
        tristate "Marvell Discovery (643XX) and Orion ethernet support"
        depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
-       select MII
+       select PHYLIB
        help
          This driver supports the gigabit ethernet MACs in the
          Marvell Discovery PPC/MIPS chipset family (MV643XX) and
@@ -2281,12 +2296,13 @@ config QLA3XXX
          will be called qla3xxx.
 
 config ATL1
-       tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
-       depends on PCI && EXPERIMENTAL
+       tristate "Atheros/Attansic L1 Gigabit Ethernet support"
+       depends on PCI
        select CRC32
        select MII
        help
-         This driver supports the Attansic L1 gigabit ethernet adapter.
+         This driver supports the Atheros/Attansic L1 gigabit ethernet
+         adapter.
 
          To compile this driver as a module, choose M here.  The module
          will be called atl1.
@@ -2302,6 +2318,18 @@ config ATL1E
          To compile this driver as a module, choose M here.  The module
          will be called atl1e.
 
+config JME
+       tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         This driver supports the PCI-Express gigabit ethernet adapters
+         based on JMicron JMC250 chipset.
+
+         To compile this driver as a module, choose M here. The module
+         will be called jme.
+
 endif # NETDEV_1000
 
 #
@@ -2377,6 +2405,13 @@ config EHEA
          To compile the driver as a module, choose M here. The module
          will be called ehea.
 
+config ENIC
+       tristate "Cisco 10G Ethernet NIC support"
+       depends on PCI && INET
+       select INET_LRO
+       help
+         This enables the support for the Cisco 10G Ethernet card.
+
 config IXGBE
        tristate "Intel(R) 10GbE PCI Express adapters support"
        depends on PCI && INET
@@ -2396,6 +2431,11 @@ config IXGBE
          To compile this driver as a module, choose M here. The module
          will be called ixgbe.
 
+config IXGBE_DCA
+       bool
+       default y
+       depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+
 config IXGB
        tristate "Intel(R) PRO/10GbE support"
        depends on PCI
@@ -2443,6 +2483,11 @@ config MYRI10GE
          To compile this driver as a module, choose M here. The module
          will be called myri10ge.
 
+config MYRI10GE_DCA
+       bool
+       default y
+       depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+
 config NETXEN_NIC
        tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
        depends on PCI
@@ -2465,6 +2510,15 @@ config PASEMI_MAC
          This driver supports the on-chip 1/10Gbit Ethernet controller on
          PA Semi's PWRficient line of chips.
 
+config MLX4_EN
+       tristate "Mellanox Technologies 10Gbit Ethernet support"
+       depends on PCI && INET
+       select MLX4_CORE
+       select INET_LRO
+       help
+         This driver supports Mellanox Technologies ConnectX Ethernet
+         devices.
+
 config MLX4_CORE
        tristate
        depends on PCI
@@ -2496,6 +2550,15 @@ config BNX2X
          To compile this driver as a module, choose M here: the module
          will be called bnx2x.  This is recommended.
 
+config QLGE
+       tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+       depends on PCI
+       help
+         This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called qlge.
+
 source "drivers/net/sfc/Kconfig"
 
 endif # NETDEV_10000