[MTD] Add Amstrad Delta NAND support

[linux-2.6-omap-h63xx.git] / drivers / mtd / nand / Kconfig

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 1fc4c134d9391f685eb1880ca90082d96cd30725..2d0ebad55a4951f440330a68367560a8153b207f 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -49,12 +49,24 @@ config MTD_NAND_SPIA
        help
          If you had to ask, you don't have one. Say 'N'.
 
+config MTD_NAND_AMS_DELTA
+       tristate "NAND Flash device on Amstrad E3"
+       depends on MACH_AMS_DELTA && MTD_NAND
+       help
+         Support for NAND flash on Amstrad E3 (Delta).
+
 config MTD_NAND_TOTO
        tristate "NAND Flash device on TOTO board"
        depends on ARCH_OMAP && MTD_NAND
        help
          Support for NAND flash on Texas Instruments Toto platform.
 
+config MTD_NAND_TS7250
+       tristate "NAND Flash device on TS-7250 board"
+       depends on MACH_TS72XX && MTD_NAND
+       help
+         Support for NAND flash on Technologic Systems TS-7250 platform.
+
 config MTD_NAND_IDS
        tristate
 
@@ -87,7 +99,7 @@ config MTD_NAND_S3C2410
          This enables the NAND flash controller on the S3C2410 and S3C2440
          SoCs
 
-         No board specfic support is done by this driver, each board
+         No board specific support is done by this driver, each board
          must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
@@ -178,17 +190,29 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
          Even if you leave this disabled, you can enable BBT writes at module
          load time (assuming you build diskonchip as a module) with the module
          parameter "inftl_bbt_write=1".
-         
- config MTD_NAND_SHARPSL
-       bool "Support for NAND Flash on Sharp SL Series (C7xx + others)"
-       depends on MTD_NAND && ARCH_PXA
- 
- config MTD_NAND_NANDSIM
-       bool "Support for NAND Flash Simulator"
-       depends on MTD_NAND && MTD_PARTITIONS
 
+config MTD_NAND_SHARPSL
+       tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+       depends on MTD_NAND && ARCH_PXA
+
+config MTD_NAND_CS553X
+       tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+       depends on MTD_NAND && X86_PC && PCI
        help
-         The simulator may simulate verious NAND flash chips for the
+         The CS553x companion chips for the AMD Geode processor
+         include NAND flash controllers with built-in hardware ECC
+         capabilities; enabling this option will allow you to use
+         these. The driver will check the MSRs to verify that the
+         controller is enabled for NAND, and currently requires that
+         the controller be in MMIO mode.
+
+         If you say "m", the module will be called "cs553x_nand.ko".
+
+config MTD_NAND_NANDSIM
+       tristate "Support for NAND Flash Simulator"
+       depends on MTD_NAND && MTD_PARTITIONS
+       help
+         The simulator may simulate various NAND flash chips for the
          MTD nand layer.
- 
+
 endmenu