This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
+config MFD_DM355EVM_MSP
+ bool "DaVinci DM355 EVM microcontroller"
+ depends on I2C && MACH_DAVINCI_DM355_EVM
+ help
+ This driver supports the MSP430 microcontroller used on these
+ boards. MSP430 firmware manages resets and power sequencing,
+ inputs from buttons and the IR remote, LEDs, an RTC, and more.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+config TPS65010
+ tristate "TPS6501x Power Management chips"
+ depends on I2C && GPIOLIB
+ default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes here you get support for the TPS6501x series of
+ Power Management chips. These include voltage regulators,
+ lithium ion/polymer battery charging, and other features that
+ are often used in portable devices like cell phones and cameras.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65010.
+
+config MENELAUS
+ bool "Texas Instruments TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP24XX
+ help
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card tranceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
+
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on I2C=y && GENERIC_HARDIRQS
help
Say yes here if you have TWL4030 family chip on your board.
This core driver provides register access and IRQ handling
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
+config TWL4030_POWER
+ bool "Support power sequencing scripts on TWL4030/TPS659x0"
+ depends on TWL4030_CORE
+ help
+ Say yes here if you want to use the power sequencing scripts on
+ the TWL4030/TPS659x0. These scripts control which regulators or
+ oscillators are switched off or on or reset when a sleep, wakeup
+ or warm reset event occurs.
+
config MFD_TMIO
bool
default n
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
+ select MFD_CORE
depends on I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
bool
depends on MFD_WM8350
+config MFD_WM8351_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
config MFD_WM8350_I2C
tristate "Support Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
+config MFD_PCF50633
+ tristate "Support for NXP PCF50633"
+ depends on I2C
+ help
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+config PCF50633_ADC
+ tristate "Support for NXP PCF50633 ADC"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
+
+config PCF50633_GPIO
+ tristate "Support for NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
+
endmenu
menu "Multimedia Capabilities Port drivers"