case VIDIOC_INT_S_VIDEO_ROUTING:
{
struct v4l2_routing *route = arg;
+ u32 input = route->input;
+ u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0;
v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output);
- /* saa7113 does not have these inputs */
- if (state->ident == V4L2_IDENT_SAA7113 &&
+ /* saa7111/3 does not have these inputs */
+ if ((state->ident == V4L2_IDENT_SAA7113 ||
+ state->ident == V4L2_IDENT_SAA7111) &&
(route->input == SAA7115_COMPOSITE4 ||
route->input == SAA7115_COMPOSITE5)) {
return -EINVAL;
(route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
state->input = route->input;
+ /* saa7111 has slightly different input numbering */
+ if (state->ident == V4L2_IDENT_SAA7111) {
+ if (input >= SAA7115_COMPOSITE4)
+ input -= 2;
+ /* saa7111 specific */
+ saa711x_write(client, R_10_CHROMA_CNTL_2,
+ (saa711x_read(client, R_10_CHROMA_CNTL_2) & 0x3f) |
+ ((route->output & 0xc0) ^ 0x40));
+ saa711x_write(client, R_13_RT_X_PORT_OUT_CNTL,
+ (saa711x_read(client, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) |
+ ((route->output & 2) ? 0x0a : 0));
+ }
+
/* select mode */
saa711x_write(client, R_02_INPUT_CNTL_1,
- (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) |
- state->input);
+ (saa711x_read(client, R_02_INPUT_CNTL_1) & mask) |
+ input);
/* bypass chrominance trap for S-Video modes */
saa711x_write(client, R_09_LUMA_CNTL,
saa711x_writeregs(client, saa7115_cfg_reset_scaler);
break;
+ case VIDIOC_INT_S_GPIO:
+ if (state->ident != V4L2_IDENT_SAA7111)
+ return -EINVAL;
+ saa711x_write(client, 0x11, (saa711x_read(client, 0x11) & 0x7f) |
+ (*(u32 *)arg ? 0x80 : 0));
+ break;
+
case VIDIOC_INT_G_VBI_DATA:
{
struct v4l2_sliced_vbi_data *data = arg;
state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
saa711x_writeregs(client, saa7115_init_auto_input);
}
- saa711x_writeregs(client, saa7115_init_misc);
+ if (state->ident != V4L2_IDENT_SAA7111)
+ saa711x_writeregs(client, saa7115_init_misc);
saa711x_set_v4lstd(client, V4L2_STD_NTSC);
v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",