for (i = reg1; i <= regn; i++) {
rc = i2c_r(ov, i);
- info("Sensor[0x%02X] = 0x%02X", i, rc);
+ dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc);
}
}
static void
dump_i2c_regs(struct usb_ov511 *ov)
{
- info("I2C REGS");
+ dev_info(&ov->dev->dev, "I2C REGS\n");
dump_i2c_range(ov, 0x00, 0x7C);
}
for (i = reg1; i <= regn; i++) {
rc = reg_r(ov, i);
- info("OV511[0x%02X] = 0x%02X", i, rc);
+ dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc);
}
}
static void
ov511_dump_regs(struct usb_ov511 *ov)
{
- info("CAMERA INTERFACE REGS");
+ dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n");
dump_reg_range(ov, 0x10, 0x1f);
- info("DRAM INTERFACE REGS");
+ dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n");
dump_reg_range(ov, 0x20, 0x23);
- info("ISO FIFO REGS");
+ dev_info(&ov->dev->dev, "ISO FIFO REGS\n");
dump_reg_range(ov, 0x30, 0x31);
- info("PIO REGS");
+ dev_info(&ov->dev->dev, "PIO REGS\n");
dump_reg_range(ov, 0x38, 0x39);
dump_reg_range(ov, 0x3e, 0x3e);
- info("I2C REGS");
+ dev_info(&ov->dev->dev, "I2C REGS\n");
dump_reg_range(ov, 0x40, 0x49);
- info("SYSTEM CONTROL REGS");
+ dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n");
dump_reg_range(ov, 0x50, 0x55);
dump_reg_range(ov, 0x5e, 0x5f);
- info("OmniCE REGS");
+ dev_info(&ov->dev->dev, "OmniCE REGS\n");
dump_reg_range(ov, 0x70, 0x79);
/* NOTE: Quantization tables are not readable. You will get the value
* in reg. 0x79 for every table register */
static void
ov518_dump_regs(struct usb_ov511 *ov)
{
- info("VIDEO MODE REGS");
+ dev_info(&ov->dev->dev, "VIDEO MODE REGS\n");
dump_reg_range(ov, 0x20, 0x2f);
- info("DATA PUMP AND SNAPSHOT REGS");
+ dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n");
dump_reg_range(ov, 0x30, 0x3f);
- info("I2C REGS");
+ dev_info(&ov->dev->dev, "I2C REGS\n");
dump_reg_range(ov, 0x40, 0x4f);
- info("SYSTEM CONTROL AND VENDOR REGS");
+ dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n");
dump_reg_range(ov, 0x50, 0x5f);
- info("60 - 6F");
+ dev_info(&ov->dev->dev, "60 - 6F\n");
dump_reg_range(ov, 0x60, 0x6f);
- info("70 - 7F");
+ dev_info(&ov->dev->dev, "70 - 7F\n");
dump_reg_range(ov, 0x70, 0x7f);
- info("Y QUANTIZATION TABLE");
+ dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n");
dump_reg_range(ov, 0x80, 0x8f);
- info("UV QUANTIZATION TABLE");
+ dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n");
dump_reg_range(ov, 0x90, 0x9f);
- info("A0 - BF");
+ dev_info(&ov->dev->dev, "A0 - BF\n");
dump_reg_range(ov, 0xa0, 0xbf);
- info("CBR");
+ dev_info(&ov->dev->dev, "CBR\n");
dump_reg_range(ov, 0xc0, 0xcf);
}
#endif
reg_w(ov, R51x_SYS_SNAP, 0x02);
reg_w(ov, R51x_SYS_SNAP, 0x00);
} else if (ov->bclass == BCL_OV518) {
- warn("snapshot reset not supported yet on OV518(+)");
+ dev_warn(&ov->dev->dev,
+ "snapshot reset not supported yet on OV518(+)\n");
} else {
- err("clear snap: invalid bridge type");
+ dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
}
}
if (ov->bclass == BCL_OV511) {
ret = reg_r(ov, R51x_SYS_SNAP);
if (ret < 0) {
- err("Error checking snspshot status (%d)", ret);
+ dev_err(&ov->dev->dev,
+ "Error checking snspshot status (%d)\n", ret);
} else if (ret & 0x08) {
status = 1;
}
} else if (ov->bclass == BCL_OV518) {
- warn("snapshot check not supported yet on OV518(+)");
+ dev_warn(&ov->dev->dev,
+ "snapshot check not supported yet on OV518(+)\n");
} else {
- err("check snap: invalid bridge type");
+ dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
}
return status;
*/
if (printph) {
- info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x",
- pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
- in[7], in[8], in[9], in[10], in[11]);
+ dev_info(&ov->dev->dev,
+ "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n",
+ pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
+ in[7], in[8], in[9], in[10], in[11]);
}
/* Check for SOF/EOF packet */
* the definitive SOF/EOF format */
if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) {
if (printph) {
- info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0],
- in[1], in[2], in[3], in[4], in[5], in[6], in[7]);
+ dev_info(&ov->dev->dev,
+ "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n",
+ in[0], in[1], in[2], in[3], in[4], in[5],
+ in[6], in[7]);
}
if (frame->scanstate == STATE_LINES) {
if (packetsize == -1) {
ov518_set_packet_size(ov, 640);
} else {
- info("Forcing packet size to %d", packetsize);
+ dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
+ packetsize);
ov518_set_packet_size(ov, packetsize);
}
} else {
if (packetsize == -1) {
ov511_set_packet_size(ov, size);
} else {
- info("Forcing packet size to %d", packetsize);
+ dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
+ packetsize);
ov511_set_packet_size(ov, packetsize);
}
}
return -EIO;
if (force_palette && p->palette != force_palette) {
- info("Palette rejected (%s)",
+ dev_info(&ov->dev->dev, "Palette rejected (%s)\n",
symbolic(v4l1_plist, p->palette));
return -EINVAL;
}
err("Error detecting sensor type");
return -1;
} else if ((rc & 3) == 3) {
- info("Sensor is an OV7610");
+ dev_info(&ov->dev->dev, "Sensor is an OV7610\n");
ov->sensor = SEN_OV7610;
} else if ((rc & 3) == 1) {
/* I don't know what's different about the 76BE yet. */
if (i2c_r(ov, 0x15) & 1)
- info("Sensor is an OV7620AE");
+ dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n");
else
- info("Sensor is an OV76BE");
+ dev_info(&ov->dev->dev, "Sensor is an OV76BE\n");
/* OV511+ will return all zero isoc data unless we
* configure the sensor as a 7620. Someone needs to
* find the exact reg. setting that causes this. */
if (ov->bridge == BRG_OV511PLUS) {
- info("Enabling 511+/7620AE workaround");
+ dev_info(&ov->dev->dev,
+ "Enabling 511+/7620AE workaround\n");
ov->sensor = SEN_OV7620;
} else {
ov->sensor = SEN_OV76BE;
}
} else if ((rc & 3) == 0) {
- info("Sensor is an OV7620");
+ dev_info(&ov->dev->dev, "Sensor is an OV7620\n");
ov->sensor = SEN_OV7620;
} else {
err("Unknown image sensor version: %d", rc & 3);
if ((rc & 3) == 0) {
ov->sensor = SEN_OV6630;
- info("Sensor is an OV6630");
+ dev_info(&ov->dev->dev, "Sensor is an OV6630\n");
} else if ((rc & 3) == 1) {
ov->sensor = SEN_OV6620;
- info("Sensor is an OV6620");
+ dev_info(&ov->dev->dev, "Sensor is an OV6620\n");
} else if ((rc & 3) == 2) {
ov->sensor = SEN_OV6630;
- info("Sensor is an OV6630AE");
+ dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n");
} else if ((rc & 3) == 3) {
ov->sensor = SEN_OV6630;
- info("Sensor is an OV6630AF");
+ dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n");
}
/* Set sensor-specific vars */
err("Error detecting sensor type");
return -1;
} else if ((rc & 0x0f) == 0) {
- info("Sensor is a KS0127");
+ dev_info(&ov->dev->dev, "Sensor is a KS0127\n");
ov->sensor = SEN_KS0127;
} else if ((rc & 0x0f) == 9) {
- info("Sensor is a KS0127B Rev. A");
+ dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n");
ov->sensor = SEN_KS0127B;
}
} else {
err("Error detecting sensor version");
return -1;
} else {
- info("Sensor is an SAA7111A (version 0x%x)", rc);
+ dev_info(&ov->dev->dev,
+ "Sensor is an SAA7111A (version 0x%x)\n", rc);
ov->sensor = SEN_SAA7111A;
}
if (ov->bclass == BCL_OV511)
reg_w(ov, 0x11, 0x00);
else
- warn("SAA7111A not yet supported with OV518/OV518+");
+ dev_warn(&ov->dev->dev,
+ "SAA7111A not yet supported with OV518/OV518+\n");
return 0;
}
PDEBUG (1, "CustomID = %d", ov->customid);
ov->desc = symbolic(camlist, ov->customid);
- info("model: %s", ov->desc);
+ dev_info(&ov->dev->dev, "model: %s\n", ov->desc);
if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) {
err("Camera type (%d) not recognized", ov->customid);
PDEBUG(4, "");
/* First 5 bits of custom ID reg are a revision ID on OV518 */
- info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID));
+ dev_info(&ov->dev->dev, "Device revision %d\n",
+ 0x1F & reg_r(ov, R511_SYS_CUST_ID));
/* Give it the default description */
ov->desc = symbolic(camlist, 0);
* required. OV518 has no uncompressed mode, to save RAM. */
if (!dumppix && !ov->compress) {
ov->compress = 1;
- warn("Compression required with OV518...enabling");
+ dev_warn(&ov->dev->dev,
+ "Compression required with OV518...enabling\n");
}
if (ov->bridge == BRG_OV518) {
goto error;
}
- info("USB %s video device found", symbolic(brglist, ov->bridge));
+ dev_info(&intf->dev, "USB %s video device found\n",
+ symbolic(brglist, ov->bridge));
init_waitqueue_head(&ov->wq);
goto error;
}
- info("Device at %s registered to minor %d", ov->usb_path,
- ov->vdev->minor);
+ dev_info(&intf->dev, "Device at %s registered to minor %d\n",
+ ov->usb_path, ov->vdev->minor);
usb_set_intfdata(intf, ov);
if (ov_create_sysfs(ov->vdev)) {
if (retval)
goto out;
- info(DRIVER_VERSION " : " DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
out:
return retval;
usb_ov511_exit(void)
{
usb_deregister(&ov511_driver);
- info("driver deregistered");
-
+ printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n");
}
module_init(usb_ov511_init);
projects / linux-2.6-omap-h63xx.git / blobdiff