struct cx8802_dev *dev= fe->dvb->priv;
struct cx8802_driver *drv = NULL;
int ret = 0;
+ int fe_id;
+
+ fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe);
+ if (!fe_id) {
+ printk(KERN_ERR "%s() No frontend found\n", __func__);
+ return -EINVAL;
+ }
drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
if (drv) {
- if (acquire)
+ if (acquire){
+ dev->frontends.active_fe_id = fe_id;
ret = drv->request_acquire(drv);
- else
+ } else {
ret = drv->request_release(drv);
+ dev->frontends.active_fe_id = 0;
+ }
}
return ret;
cx_write(MO_GP0_IO, 0x00006060);
break;
case SEC_VOLTAGE_OFF:
- printk("LNB Voltage SEC_VOLTAGE_off\n");
+ printk("LNB Voltage SEC_VOLTAGE_off\n");
break;
}
static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
{
struct dvb_frontend *fe;
+ struct videobuf_dvb_frontend *fe0 = NULL;
struct xc2028_ctrl ctl;
struct xc2028_config cfg = {
.i2c_adap = &dev->core->i2c_adap,
.ctrl = &ctl,
};
- if (!dev->dvb.frontend) {
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
+
+ if (!fe0->dvb.frontend) {
printk(KERN_ERR "%s/2: dvb frontend not attached. "
"Can't attach xc3028\n",
dev->core->name);
*/
cx88_setup_xc3028(dev->core, &ctl);
- fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->core->name);
+ dvb_frontend_detach(fe0->dvb.frontend);
+ dvb_unregister_frontend(fe0->dvb.frontend);
+ fe0->dvb.frontend = NULL;
return -EINVAL;
}
struct cx88_core *core = dev->core;
/* Reset the part */
+ /* Put the cx24116 into reset */
cx_write(MO_SRST_IO, 0);
msleep(10);
+ /* Take the cx24116 out of reset */
cx_write(MO_SRST_IO, 1);
msleep(10);
static struct stv0299_config tevii_tuner_sharp_config = {
.demod_address = 0x68,
- .inittab = sharp_z0194a__inittab,
+ .inittab = sharp_z0194a_inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = 1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
- .set_symbol_rate = sharp_z0194a__set_symbol_rate,
+ .set_symbol_rate = sharp_z0194a_set_symbol_rate,
.set_ts_params = cx24116_set_ts_param,
};
static int dvb_register(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
+ struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+ int mfe_shared = 0; /* bus not shared by default */
- /* init struct videobuf_dvb */
- dev->dvb.name = core->name;
- dev->ts_gen_cntrl = 0x0c;
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
+
+ /* multi-frontend gate control is undefined or defaults to fe0 */
+ dev->frontends.gate = 0;
- /* init frontend */
+ /* init frontend(s) */
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
- dev->dvb.frontend = dvb_attach(cx22702_attach,
+ fe0->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, &core->i2c_adap,
DVB_PLL_THOMSON_DTT759X))
goto frontend_detach;
case CX88_BOARD_CONEXANT_DVB_T1:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_WINFAST_DTV1000:
- dev->dvb.frontend = dvb_attach(cx22702_attach,
+ fe0->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x60, &core->i2c_adap,
DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR1300:
- case CX88_BOARD_HAUPPAUGE_HVR3000:
- dev->dvb.frontend = dvb_attach(cx22702_attach,
+ fe0->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
}
break;
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ /* DVB-S init */
+ fe0->dvb.frontend = dvb_attach(cx24123_attach,
+ &hauppauge_novas_config,
+ &dev->core->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
+ &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) {
+ dprintk( 1, "%s(): HVR3000 - DVB-S LNB Init: failed\n", __func__);
+ }
+ } else {
+ dprintk( 1, "%s(): HVR3000 - DVB-S Init: failed\n", __func__);
+ }
+ /* DVB-T init */
+ fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2);
+ if (fe1) {
+ dev->frontends.gate = 2;
+ mfe_shared = 1;
+ fe1->dvb.frontend = dvb_attach(cx22702_attach,
+ &hauppauge_hvr_config,
+ &dev->core->i2c_adap);
+ if (fe1->dvb.frontend) {
+ fe1->dvb.frontend->id = 1;
+ if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3)) {
+ dprintk( 1, "%s(): HVR3000 - DVB-T misc Init: failed\n", __func__);
+ }
+ } else {
+ dprintk( 1, "%s(): HVR3000 - DVB-T Init: failed\n", __func__);
+ }
+ } else {
+ dprintk( 1, "%s(): HVR3000 - DVB-T Init: can't find frontend 2.\n", __func__);
+ }
+ break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
- dev->dvb.frontend = dvb_attach(mt352_attach,
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x60, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
- dev->dvb.frontend = dvb_attach(zl10353_attach,
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x60, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* The tin box says DEE1601, but it seems to be DTT7579
* compatible, with a slightly different MT352 AGC gain. */
- dev->dvb.frontend = dvb_attach(mt352_attach,
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_dual,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
- dev->dvb.frontend = dvb_attach(zl10353_attach,
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_THOMSON_DTT7579))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
- dev->dvb.frontend = dvb_attach(mt352_attach,
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_LG_Z201))
goto frontend_detach;
}
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_ADSTECH_DVB_T_PCI:
- dev->dvb.frontend = dvb_attach(mt352_attach,
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
&dntv_live_dvbt_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
0x61, NULL, DVB_PLL_UNKNOWN_1))
goto frontend_detach;
}
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
/* MT352 is on a secondary I2C bus made from some GPIO lines */
- dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&dev->vp3054->adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3))
goto frontend_detach;
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
- dev->dvb.frontend = dvb_attach(zl10353_attach,
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_FE6600))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
- dev->dvb.frontend = dvb_attach(zl10353_attach,
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_xc3028,
&core->i2c_adap);
- if (dev->dvb.frontend == NULL)
- dev->dvb.frontend = dvb_attach(mt352_attach,
+ if (fe0->dvb.frontend == NULL)
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_mt352_xc3028,
&core->i2c_adap);
/*
* We must not permit gate_ctrl to be performed, or
* the xc3028 cannot communicate on the bus.
*/
- if (dev->dvb.frontend)
- dev->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+ if (fe0->dvb.frontend)
+ fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (attach_xc3028(0x61, dev) < 0)
- return -EINVAL;
+ goto frontend_detach;
break;
case CX88_BOARD_PCHDTV_HD3000:
- dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
+ fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_DTT761X))
goto frontend_detach;
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
- dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+ fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_MICROTUNE_4042FI5))
goto frontend_detach;
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
- dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+ fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_THOMSON_DTT761X))
goto frontend_detach;
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
- dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+ fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_gold,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF))
goto frontend_detach;
- if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
+ if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x43))
goto frontend_detach;
}
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
- dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+ fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&pchdtv_hd5500,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF))
goto frontend_detach;
- if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
+ if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x43))
goto frontend_detach;
}
break;
case CX88_BOARD_ATI_HDTVWONDER:
- dev->dvb.frontend = dvb_attach(nxt200x_attach,
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach,
&ati_hdtvwonder,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D))
goto frontend_detach;
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
- dev->dvb.frontend = dvb_attach(cx24123_attach,
+ fe0->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
&core->i2c_adap);
- if (dev->dvb.frontend) {
- if (!dvb_attach(isl6421_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend) {
+ if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
&core->i2c_adap, 0x08, ISL6421_DCL, 0x00))
goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVBS_100:
- dev->dvb.frontend = dvb_attach(cx24123_attach,
+ fe0->dvb.frontend = dvb_attach(cx24123_attach,
&kworld_dvbs_100_config,
&core->i2c_adap);
- if (dev->dvb.frontend) {
- core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
- dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
+ if (fe0->dvb.frontend) {
+ core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
case CX88_BOARD_GENIATECH_DVBS:
- dev->dvb.frontend = dvb_attach(cx24123_attach,
+ fe0->dvb.frontend = dvb_attach(cx24123_attach,
&geniatech_dvbs_config,
&core->i2c_adap);
- if (dev->dvb.frontend) {
- core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
- dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
+ if (fe0->dvb.frontend) {
+ core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
- dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&pinnacle_pctv_hd_800i_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
&core->i2c_adap,
&pinnacle_pctv_hd_800i_tuner_config))
goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
- dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_hdtv5_pci_nano_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
+ if (fe0->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &core->i2c_adap,
};
fe = dvb_attach(xc2028_attach,
- dev->dvb.frontend, &cfg);
+ fe0->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
- dev->dvb.frontend = dvb_attach(zl10353_attach,
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_pinnacle_hybrid_pctv,
&core->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
}
case CX88_BOARD_GENIATECH_X8000_MT:
dev->ts_gen_cntrl = 0x00;
- dev->dvb.frontend = dvb_attach(zl10353_attach,
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_KWORLD_ATSC_120:
- dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&kworld_atsc_120_config,
&core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
goto frontend_detach;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
- dev->dvb.frontend = dvb_attach(s5h1411_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&dvico_fusionhdtv7_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
&core->i2c_adap,
&dvico_fusionhdtv7_tuner_config))
goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_HVR4000:
+ /* DVB-S/S2 Init */
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &hauppauge_hvr4000_config,
+ &dev->core->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if(!dvb_attach(isl6421_attach, fe0->dvb.frontend,
+ &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) {
+ dprintk( 1, "%s(): HVR4000 - DVB-S LNB Init: failed\n", __func__);
+ }
+ } else {
+ dprintk( 1, "%s(): HVR4000 - DVB-S Init: failed\n", __func__);
+ }
+ /* DVB-T Init */
+ fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2);
+ if (fe1) {
+ dev->frontends.gate = 2;
+ mfe_shared = 1;
+ fe1->dvb.frontend = dvb_attach(cx22702_attach,
+ &hauppauge_hvr_config,
+ &dev->core->i2c_adap);
+ if (fe1->dvb.frontend) {
+ fe1->dvb.frontend->id = 1;
+ if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3)) {
+ dprintk( 1, "%s(): HVR4000 - DVB-T misc Init: failed\n", __func__);
+ }
+ } else {
+ dprintk( 1, "%s(): HVR4000 - DVB-T Init: failed\n", __func__);
+ }
+ } else {
+ dprintk( 1, "%s(): HVR4000 - DVB-T Init: can't find frontend 2.\n", __func__);
+ }
+ break;
case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
- /* Support for DVB-S only, not DVB-T support */
- dev->dvb.frontend = dvb_attach(cx24116_attach,
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
&hauppauge_hvr4000_config,
&dev->core->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(isl6421_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend) {
+ dvb_attach(isl6421_attach, fe0->dvb.frontend,
&dev->core->i2c_adap,
0x08, ISL6421_DCL, 0x00);
}
break;
case CX88_BOARD_TEVII_S420:
- dev->dvb.frontend = dvb_attach(stv0299_attach,
+ fe0->dvb.frontend = dvb_attach(stv0299_attach,
&tevii_tuner_sharp_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
&core->i2c_adap, DVB_PLL_OPERA1))
goto frontend_detach;
- core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
- dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+ core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
} else {
- dev->dvb.frontend = dvb_attach(stv0288_attach,
+ fe0->dvb.frontend = dvb_attach(stv0288_attach,
&tevii_tuner_earda_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- if (!dvb_attach(stb6000_attach, dev->dvb.frontend, 0x61,
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61,
&core->i2c_adap))
goto frontend_detach;
- core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
- dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
-
+ core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
}
}
break;
case CX88_BOARD_TEVII_S460:
- dev->dvb.frontend = dvb_attach(cx24116_attach,
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
&tevii_s460_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
- dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+ if (fe0->dvb.frontend != NULL) {
+ core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
}
break;
case CX88_BOARD_OMICOM_SS4_PCI:
case CX88_BOARD_TBS_8920:
case CX88_BOARD_PROF_7300:
- dev->dvb.frontend = dvb_attach(cx24116_attach,
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
&hauppauge_hvr4000_config,
&core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
- dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+ if (fe0->dvb.frontend != NULL) {
+ core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
}
break;
default:
core->name);
break;
}
- if (NULL == dev->dvb.frontend) {
+
+ if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) {
printk(KERN_ERR
"%s/2: frontend initialization failed\n",
core->name);
return -EINVAL;
}
/* define general-purpose callback pointer */
- dev->dvb.frontend->callback = cx88_tuner_callback;
+ fe0->dvb.frontend->callback = cx88_tuner_callback;
/* Ensure all frontends negotiate bus access */
- dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+ fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+ if (fe1)
+ fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL);
/* register everything */
- return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev,
- &dev->pci->dev, adapter_nr);
+ return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
+ &dev->pci->dev, adapter_nr, mfe_shared);
frontend_detach:
- if (dev->dvb.frontend) {
- dvb_frontend_detach(dev->dvb.frontend);
- dev->dvb.frontend = NULL;
- }
+ videobuf_dvb_dealloc_frontends(&dev->frontends);
return -EINVAL;
}
cx_clear(MO_GP0_IO, 0x00000004);
udelay(1000);
break;
+
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ if(core->dvbdev->frontends.active_fe_id == 1) {
+ /* DVB-S/S2 Enabled */
+
+ /* Toggle reset on cx22702 leaving i2c active */
+ cx_write(MO_GP0_IO, (core->board.input[0].gpio0 & 0x0000ff00) | 0x00000080);
+ udelay(1000);
+ cx_clear(MO_GP0_IO, 0x00000080);
+ udelay(50);
+ cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
+ cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
+ udelay(1000);
+
+ cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
+ core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
+ } else
+ if (core->dvbdev->frontends.active_fe_id == 2) {
+ /* DVB-T Enabled */
+
+ /* Put the cx24116/cx24123 into reset */
+ cx_write(MO_SRST_IO, 0);
+
+ /* cx22702 out of reset and enable it */
+ cx_set(MO_GP0_IO, 0x00000080);
+ cx_clear(MO_GP0_IO, 0x00000004);
+ core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
+ udelay(1000);
+ }
+ break;
+
default:
err = -ENODEV;
}
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ break;
default:
err = -ENODEV;
}
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
- int err;
+ int err, i;
+ struct videobuf_dvb_frontend *fe;
dprintk( 1, "%s\n", __func__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
/* dvb stuff */
printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
- videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops,
+ dev->ts_gen_cntrl = 0x0c;
+
+ for (i = 1; i <= core->board.num_frontends; i++) {
+ fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
+ if (!fe) {
+ printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i);
+ continue;
+ }
+ videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
&dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
dev);
+ /* init struct videobuf_dvb */
+ fe->dvb.name = dev->core->name;
+ }
err = dvb_register(dev);
if (err != 0)
printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
core->name, err);
-
- fail_core:
+fail_core:
return err;
}
static int cx8802_dvb_remove(struct cx8802_driver *drv)
{
+ struct cx88_core *core = drv->core;
struct cx8802_dev *dev = drv->core->dvbdev;
- /* dvb */
- if (dev->dvb.frontend)
- videobuf_dvb_unregister(&dev->dvb);
+ dprintk( 1, "%s\n", __func__);
+
+ videobuf_dvb_unregister_bus(&dev->frontends);
vp3054_i2c_remove(dev);
projects / linux-2.6-omap-h63xx.git / blobdiff