--- /dev/null
+/*
+ cx231xx-pcb-cfg.h - driver for Conexant
+ Cx23100/101/102 USB video capture devices
+
+ Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PCB_CONFIG_H_
+#define _PCB_CONFIG_H_
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+/***************************************************************************
+ * Class Information *
+***************************************************************************/
+#define CLASS_DEFAULT 0xFF
+
+enum VENDOR_REQUEST_TYPE {
+ /* Set/Get I2C */
+ VRT_SET_I2C0 = 0x0,
+ VRT_SET_I2C1 = 0x1,
+ VRT_SET_I2C2 = 0x2,
+ VRT_GET_I2C0 = 0x4,
+ VRT_GET_I2C1 = 0x5,
+ VRT_GET_I2C2 = 0x6,
+
+ /* Set/Get GPIO */
+ VRT_SET_GPIO = 0x8,
+ VRT_GET_GPIO = 0x9,
+
+ /* Set/Get GPIE */
+ VRT_SET_GPIE = 0xA,
+ VRT_GET_GPIE = 0xB,
+
+ /* Set/Get Register Control/Status */
+ VRT_SET_REGISTER = 0xC,
+ VRT_GET_REGISTER = 0xD,
+
+ /* Get Extended Compat ID Descriptor */
+ VRT_GET_EXTCID_DESC = 0xFF,
+};
+
+enum BYTE_ENABLE_MASK {
+ ENABLE_ONE_BYTE = 0x1,
+ ENABLE_TWE_BYTE = 0x3,
+ ENABLE_THREE_BYTE = 0x7,
+ ENABLE_FOUR_BYTE = 0xF,
+};
+
+#define SPEED_MASK 0x1
+enum USB_SPEED{
+ FULL_SPEED = 0x0, /* 0: full speed */
+ HIGH_SPEED = 0x1 /* 1: high speed */
+};
+
+enum _true_false{
+ FALSE = 0,
+ TRUE = 1
+};
+
+#define TS_MASK 0x6
+enum TS_PORT{
+ NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid,
+ only offers Analog TV or Video */
+ TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode :
+ Digital or External Analog/Compressed source) */
+ TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs
+ (Dual inputs from Digital and/or
+ External Analog/Compressed sources) */
+ TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector
+ to external clock */
+ TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output,
+ TS2 Input (from Compressor) */
+};
+
+#define EAVP_MASK 0x8
+enum EAV_PRESENT{
+ NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs
+ (no need for i2s blcok),
+ Analog Tuner must be present */
+ EXTERNAL_AV = 0x8 /* 1: External A/V inputs
+ present (requires i2s blk) */
+};
+
+#define ATM_MASK 0x30
+enum AT_MODE{
+ DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */
+ BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite &
+ Sound-IF Signals present */
+ NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */
+};
+
+#define PWR_SEL_MASK 0x40
+enum POWE_TYPE{
+ SELF_POWER = 0x0, /* 0: self power */
+ BUS_POWER = 0x40 /* 1: bus power */
+};
+
+enum USB_POWE_TYPE{
+ USB_SELF_POWER = 0,
+ USB_BUS_POWER
+};
+
+#define BO_0_MASK 0x80
+enum AVDEC_STATUS{
+ AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */
+ AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */
+};
+
+#define BO_1_MASK 0x100
+
+#define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */
+#define SELFPOWER_MASK 0x86
+
+/***************************************************************************/
+#define NOT_DECIDE_YET 0xFE
+#define NOT_SUPPORTED 0xFF
+
+/***************************************************************************
+ * for mod field use *
+***************************************************************************/
+#define MOD_DIGITAL 0x1
+#define MOD_ANALOG 0x2
+#define MOD_DIF 0x4
+#define MOD_EXTERNAL 0x8
+#define CAP_ALL_MOD 0x0f
+
+/***************************************************************************
+ * source define *
+***************************************************************************/
+#define SOURCE_DIGITAL 0x1
+#define SOURCE_ANALOG 0x2
+#define SOURCE_DIF 0x4
+#define SOURCE_EXTERNAL 0x8
+#define SOURCE_TS_BDA 0x10
+#define SOURCE_TS_ENCODE 0x20
+#define SOURCE_TS_EXTERNAL 0x40
+
+/***************************************************************************
+ * interface information define *
+***************************************************************************/
+struct INTERFACE_INFO {
+ u8 interrupt_index;
+ u8 ts1_index;
+ u8 ts2_index;
+ u8 audio_index;
+ u8 video_index;
+ u8 vanc_index; /* VBI */
+ u8 hanc_index; /* Sliced CC */
+ u8 ir_index;
+};
+
+enum INDEX_INTERFACE_INFO{
+ INDEX_INTERRUPT = 0x0,
+ INDEX_TS1,
+ INDEX_TS2,
+ INDEX_AUDIO,
+ INDEX_VIDEO,
+ INDEX_VANC,
+ INDEX_HANC,
+ INDEX_IR,
+};
+
+/***************************************************************************
+ * configuration information define *
+***************************************************************************/
+struct CONFIG_INFO {
+ u8 config_index;
+ struct INTERFACE_INFO interface_info;
+};
+
+struct pcb_config {
+ u8 index;
+ u8 type; /* bus power or self power,
+ self power--0, bus_power--1 */
+ u8 speed; /* usb speed, 2.0--1, 1.1--0 */
+ u8 mode; /* digital , anlog, dif or external A/V */
+ u32 ts1_source; /* three source -- BDA,External,encode */
+ u32 ts2_source;
+ u32 analog_source;
+ u8 digital_index; /* bus-power used */
+ u8 analog_index; /* bus-power used */
+ u8 dif_index; /* bus-power used */
+ u8 external_index; /* bus-power used */
+ u8 config_num; /* current config num, 0,1,2,
+ for self-power, always 0 */
+ struct CONFIG_INFO hs_config_info[3];
+ struct CONFIG_INFO fs_config_info[3];
+};
+
+enum INDEX_PCB_CONFIG{
+ INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
+ INDEX_SELFPOWER_DUAL_DIGITAL,
+ INDEX_SELFPOWER_ANALOG_ONLY,
+ INDEX_SELFPOWER_DUAL,
+ INDEX_SELFPOWER_TRIPLE,
+ INDEX_SELFPOWER_COMPRESSOR,
+ INDEX_BUSPOWER_DIGITAL_ONLY,
+ INDEX_BUSPOWER_ANALOG_ONLY,
+ INDEX_BUSPOWER_DIF_ONLY,
+ INDEX_BUSPOWER_EXTERNAL_ONLY,
+ INDEX_BUSPOWER_EXTERNAL_ANALOG,
+ INDEX_BUSPOWER_EXTERNAL_DIF,
+ INDEX_BUSPOWER_EXTERNAL_DIGITAL,
+ INDEX_BUSPOWER_DIGITAL_ANALOG,
+ INDEX_BUSPOWER_DIGITAL_DIF,
+ INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
+ INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
+};
+
+/***************************************************************************/
+struct cx231xx;
+
+u32 initialize_cx231xx(struct cx231xx *p_dev);
+
+#endif
projects / linux-2.6-omap-h63xx.git / blobdiff