+#
+# Generic video config states
+#
+
+config VIDEO_V4L2
+ tristate
+ depends on VIDEO_DEV && VIDEO_V4L2_COMMON
+ default VIDEO_DEV && VIDEO_V4L2_COMMON
+
+config VIDEO_V4L1
+ tristate
+ depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+ default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+
+config VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DMA_SG
+ depends on HAS_DMA
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_VMALLOC
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DVB
+ tristate
+ select VIDEOBUF_GEN
+ select VIDEOBUF_DMA_SG
+
+config VIDEO_BTCX
+ tristate
+
+config VIDEO_IR_I2C
+ tristate
+
+config VIDEO_IR
+ tristate
+ depends on INPUT
+ select VIDEO_IR_I2C if I2C
+
+config VIDEO_TVEEPROM
+ tristate
+ depends on I2C
+
+config VIDEO_TUNER
+ tristate
+ depends on MEDIA_TUNER
+
#
# Multimedia Video device configuration
#
This is a driver for the Toshiba TCM825x VGA camera sensor.
It is used for example in Nokia N800.
+config VIDEO_OV9640
+ tristate "OmniVision OV9640 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV9640 camera. It is currently working with the TI OMAP2
+ camera controller.
+
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L1 && I2C
To compile this driver as a module, choose M here: the
module will be called saa7115.
+config VIDEO_SAA717X
+ tristate "Philips SAA7171/3/4 audio/video decoders"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Philips SAA7171/3/4 audio/video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa717x.
+
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
depends on VIDEO_V4L1 && I2C
source "drivers/media/video/cx23885/Kconfig"
+source "drivers/media/video/au0828/Kconfig"
+
source "drivers/media/video/ivtv/Kconfig"
+source drivers/media/video/omap/Kconfig
+
+source "drivers/media/video/cx18/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
+config VIDEO_OMAP2
+ tristate "OMAP 2 Camera support (EXPERIMENTAL)"
+ select VIDEOBUF_GEN
+ select VIDEOBUF_DMA_SG
+ depends on VIDEO_V4L2 && ARCH_OMAP24XX
+ ---help---
+ Driver for an OMAP 2 camera controller.
+
+
#
# USB Multimedia device configuration
#
config SOC_CAMERA_MT9M001
tristate "mt9m001 support"
- depends on SOC_CAMERA && GENERIC_GPIO
+ depends on SOC_CAMERA && I2C
select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
help
This driver supports MT9M001 cameras from Micron, monochrome
config MT9M001_PCA9536_SWITCH
bool "pca9536 datawidth switch for mt9m001"
- depends on SOC_CAMERA_MT9M001
+ depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
help
Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
extender to switch between 8 and 10 bit datawidth modes
config SOC_CAMERA_MT9V022
tristate "mt9v022 support"
- depends on SOC_CAMERA && GENERIC_GPIO
+ depends on SOC_CAMERA && I2C
select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
help
This driver supports MT9V022 cameras from Micron
config MT9V022_PCA9536_SWITCH
bool "pca9536 datawidth switch for mt9v022"
- depends on SOC_CAMERA_MT9V022
+ depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
help
Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
extender to switch between 8 and 10 bit datawidth modes