Merge current mainline tree into linux-omap tree

[linux-2.6-omap-h63xx.git] / drivers / media / video / Kconfig

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 1832966f53f3bee6b95e631ed248b61d30ef452c..86994a4be15cce84ee8042edd9b62238f57ab5ff 100644 (file)
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1,3 +1,53 @@
+#
+# Generic video config states
+#
+
+config VIDEO_V4L2
+       tristate
+       depends on VIDEO_DEV && VIDEO_V4L2_COMMON
+       default VIDEO_DEV && VIDEO_V4L2_COMMON
+
+config VIDEO_V4L1
+       tristate
+       depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+       default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+
+config VIDEOBUF_GEN
+       tristate
+
+config VIDEOBUF_DMA_SG
+       depends on HAS_DMA
+       select VIDEOBUF_GEN
+       tristate
+
+config VIDEOBUF_VMALLOC
+       select VIDEOBUF_GEN
+       tristate
+
+config VIDEOBUF_DVB
+       tristate
+       select VIDEOBUF_GEN
+       select VIDEOBUF_DMA_SG
+
+config VIDEO_BTCX
+       tristate
+
+config VIDEO_IR_I2C
+       tristate
+
+config VIDEO_IR
+       tristate
+       depends on INPUT
+       select VIDEO_IR_I2C if I2C
+
+config VIDEO_TVEEPROM
+       tristate
+       depends on I2C
+
+config VIDEO_TUNER
+       tristate
+       depends on MEDIA_TUNER
+
 #
 # Multimedia Video device configuration
 #
@@ -232,6 +282,14 @@ config VIDEO_TCM825X
          This is a driver for the Toshiba TCM825x VGA camera sensor.
          It is used for example in Nokia N800.
 
+config VIDEO_OV9640
+       tristate "OmniVision OV9640 sensor support"
+       depends on I2C && VIDEO_V4L2
+       ---help---
+         This is a Video4Linux2 sensor-level driver for the OmniVision
+         OV9640 camera.  It is currently working with the TI OMAP2
+         camera controller.
+
 config VIDEO_SAA7110
        tristate "Philips SAA7110 video decoder"
        depends on VIDEO_V4L1 && I2C
@@ -270,6 +328,15 @@ config VIDEO_SAA711X
          To compile this driver as a module, choose M here: the
          module will be called saa7115.
 
+config VIDEO_SAA717X
+       tristate "Philips SAA7171/3/4 audio/video decoders"
+       depends on VIDEO_V4L2 && I2C
+       ---help---
+         Support for the Philips SAA7171/3/4 audio/video decoders.
+
+         To compile this driver as a module, choose M here: the
+         module will be called saa717x.
+
 config VIDEO_SAA7191
        tristate "Philips SAA7191 video decoder"
        depends on VIDEO_V4L1 && I2C
@@ -689,8 +756,14 @@ source "drivers/media/video/cx88/Kconfig"
 
 source "drivers/media/video/cx23885/Kconfig"
 
+source "drivers/media/video/au0828/Kconfig"
+
 source "drivers/media/video/ivtv/Kconfig"
 
+source drivers/media/video/omap/Kconfig
+
+source "drivers/media/video/cx18/Kconfig"
+
 config VIDEO_M32R_AR
        tristate "AR devices"
        depends on M32R && VIDEO_V4L1
@@ -719,6 +792,15 @@ config VIDEO_CAFE_CCIC
          CMOS camera controller.  This is the controller found on first-
          generation OLPC systems.
 
+config VIDEO_OMAP2
+       tristate "OMAP 2 Camera support (EXPERIMENTAL)"
+       select VIDEOBUF_GEN
+       select VIDEOBUF_DMA_SG
+       depends on VIDEO_V4L2 && ARCH_OMAP24XX
+       ---help---
+         Driver for an OMAP 2 camera controller.
+
+
 #
 # USB Multimedia device configuration
 #
@@ -836,4 +918,49 @@ config USB_STKWEBCAM
 
 endif # V4L_USB_DRIVERS
 
+config SOC_CAMERA
+       tristate "SoC camera support"
+       depends on VIDEO_V4L2
+       select VIDEOBUF_DMA_SG
+       help
+         SoC Camera is a common API to several cameras, not connecting
+         over a bus like PCI or USB. For example some i2c camera connected
+         directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+       tristate "mt9m001 support"
+       depends on SOC_CAMERA && I2C
+       select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+       help
+         This driver supports MT9M001 cameras from Micron, monochrome
+         and colour models.
+
+config MT9M001_PCA9536_SWITCH
+       bool "pca9536 datawidth switch for mt9m001"
+       depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
+       help
+         Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
+         extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_MT9V022
+       tristate "mt9v022 support"
+       depends on SOC_CAMERA && I2C
+       select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+       help
+         This driver supports MT9V022 cameras from Micron
+
+config MT9V022_PCA9536_SWITCH
+       bool "pca9536 datawidth switch for mt9v022"
+       depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
+       help
+         Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
+         extender to switch between 8 and 10 bit datawidth modes
+
+config VIDEO_PXA27x
+       tristate "PXA27x Quick Capture Interface driver"
+       depends on VIDEO_DEV && PXA27x
+       select SOC_CAMERA
+       ---help---
+         This is a v4l2 driver for the PXA27x Quick Capture Interface
+
 endif # VIDEO_CAPTURE_DRIVERS