#define FC_MAX_I2C_RETRIES 100000
+/* #define DUMP_I2C_MESSAGES */
+
static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
{
int i;
return -EREMOTEIO;
}
-static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
+ flexcop_ibi_value r100, u8 *buf)
{
flexcop_ibi_value r104;
int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
ret;
- if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
- /* The Cablestar needs a different kind of i2c-transfer (does not
- * support "Repeat Start"):
- * wait for the ACK failure,
- * and do a subsequent read with the Bit 30 enabled
- */
- r100.tw_sm_c_100.no_base_addr_ack_error = 1;
- if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
- deb_i2c("no_base_addr read failed. %d\n",ret);
- return ret;
- }
+ r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+ ret = flexcop_i2c_operation(i2c->fc, &r100);
+ if (ret != 0) {
+ deb_i2c("read failed. %d\n", ret);
+ return ret;
}
buf[0] = r100.tw_sm_c_100.data1_reg;
if (len > 0) {
- r104 = fc->read_ibi_reg(fc,tw_sm_c_104);
- deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+ r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104);
+ deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
/* there is at least one more byte, otherwise we wouldn't be here */
buf[1] = r104.tw_sm_c_104.data2_reg;
r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
- deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+ deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
/* write the additional i2c data before doing the actual i2c operation */
- fc->write_ibi_reg(fc,tw_sm_c_104,r104);
- return flexcop_i2c_operation(fc,&r100);
+ fc->write_ibi_reg(fc, tw_sm_c_104, r104);
+ return flexcop_i2c_operation(fc, &r100);
}
-int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
- flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
+ flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
{
int ret;
+
+#ifdef DUMP_I2C_MESSAGES
+ int i;
+#endif
+
u16 bytes_to_transfer;
flexcop_ibi_value r100;
r100.raw = 0;
r100.tw_sm_c_100.chipaddr = chipaddr;
r100.tw_sm_c_100.twoWS_rw = op;
- r100.tw_sm_c_100.twoWS_port_reg = port;
+ r100.tw_sm_c_100.twoWS_port_reg = i2c->port;
+
+#ifdef DUMP_I2C_MESSAGES
+ printk(KERN_DEBUG "%d ", i2c->port);
+ if (op == FC_READ)
+ printk("rd(");
+ else
+ printk("wr(");
+
+ printk("%02x): %02x ", chipaddr, addr);
+#endif
+
+ /* in that case addr is the only value ->
+ * we write it twice as baseaddr and val0
+ * BBTI is doing it like that for ISL6421 at least */
+ if (i2c->no_base_addr && len == 0 && op == FC_WRITE) {
+ buf = &addr;
+ len = 1;
+ }
while (len != 0) {
bytes_to_transfer = len > 4 ? 4 : len;
r100.tw_sm_c_100.baseaddr = addr;
if (op == FC_READ)
- ret = flexcop_i2c_read4(fc, r100, buf);
+ ret = flexcop_i2c_read4(i2c, r100, buf);
else
- ret = flexcop_i2c_write4(fc,r100, buf);
+ ret = flexcop_i2c_write4(i2c->fc, r100, buf);
+
+#ifdef DUMP_I2C_MESSAGES
+ for (i = 0; i < bytes_to_transfer; i++)
+ printk("%02x ", buf[i]);
+#endif
if (ret < 0)
return ret;
buf += bytes_to_transfer;
addr += bytes_to_transfer;
len -= bytes_to_transfer;
- };
+ }
+
+#ifdef DUMP_I2C_MESSAGES
+ printk("\n");
+#endif
return 0;
}
/* master xfer callback for demodulator */
static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
{
- struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
+ struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
int i, ret = 0;
- if (mutex_lock_interruptible(&fc->i2c_mutex))
- return -ERESTARTSYS;
-
- /* reading */
- if (num == 2 &&
- msgs[0].flags == 0 &&
- msgs[1].flags == I2C_M_RD &&
- msgs[0].buf != NULL &&
- msgs[1].buf != NULL) {
+ /* Some drivers use 1 byte or 0 byte reads as probes, which this
+ * driver doesn't support. These probes will always fail, so this
+ * hack makes them always succeed. If one knew how, it would of
+ * course be better to actually do the read. */
+ if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1)
+ return 1;
- ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
+ if (mutex_lock_interruptible(&i2c->fc->i2c_mutex))
+ return -ERESTARTSYS;
- } else for (i = 0; i < num; i++) { /* writing command */
- if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) {
- ret = -EINVAL;
+ for (i = 0; i < num; i++) {
+ /* reading */
+ if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
+ ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
+ msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len);
+ i++; /* skip the following message */
+ } else /* writing */
+ ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
+ msgs[i].buf[0], &msgs[i].buf[1],
+ msgs[i].len - 1);
+ if (ret < 0) {
+ err("i2c master_xfer failed");
break;
}
-
- ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
}
- if (ret < 0)
- err("i2c master_xfer failed");
- else
- ret = num;
-
- mutex_unlock(&fc->i2c_mutex);
+ mutex_unlock(&i2c->fc->i2c_mutex);
+ if (ret == 0)
+ ret = num;
return ret;
}
mutex_init(&fc->i2c_mutex);
- memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
- strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",
- sizeof(fc->i2c_adap.name));
-
- i2c_set_adapdata(&fc->i2c_adap,fc);
+ fc->fc_i2c_adap[0].fc = fc;
+ fc->fc_i2c_adap[1].fc = fc;
+ fc->fc_i2c_adap[2].fc = fc;
+
+ fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
+ fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
+ fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
+
+ strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+ sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+ sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+ sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
+
+ i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
+ i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
+ i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]);
+
+ fc->fc_i2c_adap[0].i2c_adap.class =
+ fc->fc_i2c_adap[1].i2c_adap.class =
+ fc->fc_i2c_adap[2].i2c_adap.class = I2C_CLASS_TV_DIGITAL;
+ fc->fc_i2c_adap[0].i2c_adap.algo =
+ fc->fc_i2c_adap[1].i2c_adap.algo =
+ fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo;
+ fc->fc_i2c_adap[0].i2c_adap.algo_data =
+ fc->fc_i2c_adap[1].i2c_adap.algo_data =
+ fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL;
+ fc->fc_i2c_adap[0].i2c_adap.dev.parent =
+ fc->fc_i2c_adap[1].i2c_adap.dev.parent =
+ fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev;
+
+ ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap);
+ if (ret < 0)
+ return ret;
- fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
- fc->i2c_adap.algo = &flexcop_algo;
- fc->i2c_adap.algo_data = NULL;
- fc->i2c_adap.dev.parent = fc->dev;
+ ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap);
+ if (ret < 0)
+ goto adap_1_failed;
- if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
- return ret;
+ ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap);
+ if (ret < 0)
+ goto adap_2_failed;
fc->init_state |= FC_STATE_I2C_INIT;
return 0;
+
+adap_2_failed:
+ i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
+adap_1_failed:
+ i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
+
+ return ret;
}
void flexcop_i2c_exit(struct flexcop_device *fc)
{
- if (fc->init_state & FC_STATE_I2C_INIT)
- i2c_del_adapter(&fc->i2c_adap);
+ if (fc->init_state & FC_STATE_I2C_INIT) {
+ i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap);
+ i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
+ i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
+ }
fc->init_state &= ~FC_STATE_I2C_INIT;
}
projects / linux-2.6-omap-h63xx.git / blobdiff