Merge current mainline tree into linux-omap tree

[linux-2.6-omap-h63xx.git] / drivers / leds / Kconfig

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6a2f44153c748ee22cf28ccba9e24d15579d00c2..dbcfd985d8db0f6011dd8088c7ffabef7ece92f1 100644 (file)
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -24,13 +24,6 @@ config LEDS_ATMEL_PWM
          This option enables support for LEDs driven using outputs
          of the dedicated PWM controller found on newer Atmel SOCs.
 
-config LEDS_CORGI
-       tristate "LED Support for the Sharp SL-C7x0 series"
-       depends on LEDS_CLASS && PXA_SHARP_C7xx
-       help
-         This option enables support for the LEDs on Sharp Zaurus
-         SL-C7x0 series (C700, C750, C760, C860).
-
 config LEDS_LOCOMO
        tristate "LED Support for Locomo device"
        depends on LEDS_CLASS && SHARP_LOCOMO
@@ -38,13 +31,6 @@ config LEDS_LOCOMO
          This option enables support for the LEDs on Sharp Locomo.
          Zaurus models SL-5500 and SL-5600.
 
-config LEDS_SPITZ
-       tristate "LED Support for the Sharp SL-Cxx00 series"
-       depends on LEDS_CLASS && PXA_SHARP_Cxx00
-       help
-         This option enables support for the LEDs on Sharp Zaurus
-         SL-Cxx00 series (C1000, C3000, C3100).
-
 config LEDS_S3C24XX
        tristate "LED Support for Samsung S3C24XX GPIO LEDs"
        depends on LEDS_CLASS && ARCH_S3C2410
@@ -117,6 +103,14 @@ config LEDS_COBALT_RAQ
        help
          This option enables support for the Cobalt Raq series LEDs.
 
+config LEDS_SUNFIRE
+       tristate "LED support for SunFire servers."
+       depends on LEDS_CLASS && SPARC64
+       select LEDS_TRIGGERS
+       help
+         This option enables support for the Left, Middle, and Right
+         LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
+
 config LEDS_HP6XX
        tristate "LED Support for the HP Jornada 6xx"
        depends on LEDS_CLASS && SH_HP6XX
@@ -140,11 +134,12 @@ config LEDS_GPIO
          outputs. To be useful the particular board must have LEDs
          and they must be connected to the GPIO lines.
 
-config LEDS_CM_X270
-       tristate "LED Support for the CM-X270 LEDs"
-       depends on LEDS_CLASS && MACH_ARMCORE
+config LEDS_HP_DISK
+       tristate "LED Support for disk protection LED on HP notebooks"
+       depends on LEDS_CLASS && ACPI
        help
-         This option enables support for the CM-X270 LEDs.
+         This option enable support for disk protection LED, found on
+         newer HP notebooks.
 
 config LEDS_CLEVO_MAIL
        tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
@@ -184,6 +179,13 @@ config LEDS_PCA955X
          LED driver chips accessed via the I2C bus.  Supported
          devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 
+config LEDS_DA903X
+       tristate "LED Support for DA9030/DA9034 PMIC"
+       depends on LEDS_CLASS && PMIC_DA903X
+       help
+         This option enables support for on-chip LED drivers found
+         on Dialog Semiconductor DA9030/DA9034 PMICs.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
@@ -206,7 +208,7 @@ config LEDS_TRIGGER_TIMER
 
 config LEDS_TRIGGER_IDE_DISK
        bool "LED IDE Disk Trigger"
-       depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
+       depends on LEDS_TRIGGERS && IDE_GD_ATA
        help
          This allows LEDs to be controlled by IDE disk activity.
          If unsure, say Y.
@@ -220,6 +222,15 @@ config LEDS_TRIGGER_HEARTBEAT
          load average.
          If unsure, say Y.
 
+config LEDS_TRIGGER_BACKLIGHT
+       tristate "LED backlight Trigger"
+       depends on LEDS_TRIGGERS
+       help
+         This allows LEDs to be controlled as a backlight device: they
+         turn off and on when the display is blanked and unblanked.
+
+         If unsure, say N.
+
 config LEDS_TRIGGER_DEFAULT_ON
        tristate "LED Default ON Trigger"
        depends on LEDS_TRIGGERS