This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
+config LEDS_MIKROTIK_RB532
+ tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS && MIKROTIK_RB532
+ help
+ This option enables support for the so called "User LED" of
+ Mikrotik's Routerboard 532.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
help
This option enables support for the PCEngines WRAP programmable LEDs.
-config LEDS_ALIX2
- tristate "LED Support for ALIX.2 and ALIX.3 series"
- depends on LEDS_CLASS && X86 && EXPERIMENTAL
+config LEDS_OMAP_DEBUG
+ boolean "LED Support for OMAP debug board LEDs"
+ depends on LEDS_CLASS=y && ARCH_OMAP
+ help
+ Enables support for the LEDs on the debug board used with OMAP
+ reference boards like H2/H3/H4 and Perseus2. Up to six of these
+ may be claimed by the original ARM debug LED API.
+
+config LEDS_OMAP
+ tristate "LED Support for OMAP GPIO LEDs"
+ depends on LEDS_CLASS && ARCH_OMAP
help
- This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+ This option enables support for the LEDs on OMAP processors.
+
+config LEDS_OMAP_PWM
+ tristate "LED Support for OMAP PWM-controlled LEDs"
+ depends on LEDS_CLASS && ARCH_OMAP && OMAP_DM_TIMER
+ help
+ This options enables support for LEDs connected to GPIO lines
+ controlled by a PWM timer on OMAP CPUs.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
config LEDS_COBALT_RAQ
bool "LED Support for the Cobalt Raq series"
- depends on LEDS_CLASS=y && MIPS_COBALT
+ depends on LEDS_CLASS && MIPS_COBALT
select LEDS_TRIGGERS
help
This option enables support for the Cobalt Raq series LEDs.
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
- and they must be connected to the GPIO lines.
+ and they must be connected to the GPIO lines. The LEDs must be
+ defined as platform devices and/or OpenFirmware platform devices.
+ The code to use these bindings can be selected below.
+
+config LEDS_GPIO_PLATFORM
+ bool "Platform device bindings for GPIO LEDs"
+ depends on LEDS_GPIO
+ default y
+ help
+ Let the leds-gpio driver drive LEDs which have been defined as
+ platform devices. If you don't know what this means, say yes.
+
+config LEDS_GPIO_OF
+ bool "OpenFirmware platform device bindings for GPIO LEDs"
+ depends on LEDS_GPIO && OF_DEVICE
+ default y
+ help
+ Let the leds-gpio driver drive LEDs which have been defined as
+ of_platform devices. For instance, LEDs which are listed in a "dts"
+ file.
+
+config LEDS_LP5521
+ tristate "LED Support for the LP5521 LEDs"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say 'Y' here you get support for the National Semiconductor
+ LP5521 LED driver used in n8x0 boards.
+
+ This driver can be built as a module by choosing 'M'. The module
+ will be called leds-lp5521.
+
+config LEDS_LP5521
+ tristate "LED Support for the LP5521 LEDs"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say 'Y' here you get support for the National Semiconductor
+ LP5521 LED driver used in n8x0 boards.
+
+ This driver can be built as a module by choosing 'M'. The module
+ will be called leds-lp5521.
config LEDS_CLEVO_MAIL
- tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
- depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
+ tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
programs through the leds subsystem. This LED have three
LED driver chips accessed via the I2C bus. Supported
devices include PCA9550, PCA9551, PCA9552, and PCA9553.
-config LEDS_WM8350
- tristate "LED Support for WM8350 AudioPlus PMIC"
- depends on LEDS_CLASS && MFD_WM8350
- help
- This option enables support for LEDs driven by the Wolfson
- Microelectronics WM8350 AudioPlus PMIC.
-
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
depends on LEDS_CLASS && PMIC_DA903X
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
+config LEDS_DAC124S085
+ tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS && SPI
+ help
+ This option enables support for DAC124S085 SPI DAC from NatSemi,
+ which can be used to control up to four LEDs.
+
+config LEDS_PWM
+ tristate "PWM driven LED Support"
+ depends on LEDS_CLASS && HAVE_PWM
+ help
+ This option enables support for pwm driven LEDs
+
+config LEDS_BD2802
+ tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS && I2C
+ help
+ This option enables support for BD2802GU RGB LED driver chips
+ accessed via the I2C bus.
+
comment "LED Triggers"
config LEDS_TRIGGERS
If unsure, say N.
+config LEDS_TRIGGER_GPIO
+ tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
+ depends on GPIOLIB
+ help
+ This allows LEDs to be controlled by gpio events. It's good
+ when using gpios as switches and triggering the needed LEDs
+ from there. One use case is n810's keypad LEDs that could
+ be triggered by this trigger when user slides up to show
+ keypad.
+
+ If unsure, say N.
+
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
depends on LEDS_TRIGGERS
projects / linux-2.6-omap-h63xx.git / blobdiff