IB/ipath: Add ipath_read_ireg() abstraction

[linux-2.6-omap-h63xx.git] / drivers / infiniband / hw / ipath / ipath_kernel.h

diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 7bb0d08820d868549583a8925db42c496da395db..c472904224578bca556d99b83358b9dcfd79adcd 100644 (file)
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -253,6 +253,9 @@ struct ipath_devdata {
        int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
        /* free irq */
        void (*ipath_f_free_irq)(struct ipath_devdata *);
+       void (*ipath_f_config_ports)(struct ipath_devdata *, ushort);
+       void (*ipath_f_read_counters)(struct ipath_devdata *,
+                                     struct infinipath_counters *);
        struct ipath_ibdev *verbs_dev;
        struct timer_list verbs_timer;
        /* total dwords sent (summed from counter) */
@@ -324,6 +327,8 @@ struct ipath_devdata {
        u32 ipath_cfgports;
        /* count of port 0 hdrqfull errors */
        u32 ipath_p0_hdrqfull;
+       /* port 0 number of receive eager buffers */
+       u32 ipath_p0_rcvegrcnt;
 
        /*
         * index of last piobuffer we used.  Speeds up searching, by
@@ -393,6 +398,8 @@ struct ipath_devdata {
        void *ipath_dummy_hdrq; /* used after port close */
        dma_addr_t ipath_dummy_hdrq_phys;
 
+       unsigned long ipath_ureg_align; /* user register alignment */
+
        /*
         * Shadow copies of registers; size indicates read access size.
         * Most of them are readonly, but some are write-only register,
@@ -746,9 +753,12 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
                 * are 64bit */
 #define IPATH_32BITCOUNTERS 0x20000
                /* can miss port0 rx interrupts */
+               /* Interrupt register is 64 bits */
+#define IPATH_INTREG_64     0x40000
 #define IPATH_DISABLED      0x80000 /* administratively disabled */
                /* Use GPIO interrupts for new counters */
 #define IPATH_GPIO_ERRINTRS 0x100000
+#define IPATH_SWAP_PIOBUFS  0x200000
 
 /* Bits in GPIO for the added interrupts */
 #define IPATH_GPIO_PORT0_BIT 2
@@ -863,7 +873,7 @@ static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
        return readl(regno + (u64 __iomem *)
                     (dd->ipath_uregbase +
                      (char __iomem *)dd->ipath_kregbase +
-                     dd->ipath_palign * port));
+                     dd->ipath_ureg_align * port));
 }
 
 /**
@@ -880,7 +890,7 @@ static inline void ipath_write_ureg(const struct ipath_devdata *dd,
 {
        u64 __iomem *ubase = (u64 __iomem *)
                (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
-                dd->ipath_palign * port);
+                dd->ipath_ureg_align * port);
        if (dd->ipath_kregbase)
                writeq(value, &ubase[regno]);
 }
@@ -930,6 +940,15 @@ static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
                      (char __iomem *)dd->ipath_kregbase));
 }
 
+static inline void ipath_write_creg(const struct ipath_devdata *dd,
+                                   ipath_creg regno, u64 value)
+{
+       if (dd->ipath_kregbase)
+               writeq(value, regno + (u64 __iomem *)
+                      (dd->ipath_cregbase +
+                       (char __iomem *)dd->ipath_kregbase));
+}
+
 static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd)
 {
        *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL;
@@ -941,6 +960,12 @@ static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
                                pd->port_rcvhdrtail_kvaddr));
 }
 
+static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
+{
+       return (dd->ipath_flags & IPATH_INTREG_64) ?
+               ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r);
+}
+
 /*
  * sysfs interface.
  */