dma_base = pci_resource_start(dev, baridx);
- if (dma_base == 0)
+ if (dma_base == 0) {
printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+ return 0;
+ }
}
- if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) {
+ if (hwif->channel)
+ dma_base += 8;
+
+ if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
u8 simplex_stat = 0;
- dma_base += hwif->channel ? 8 : 0;
switch(dev->device) {
case PCI_DEVICE_ID_AL_M5219:
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0;
+ u8 oldnoprobe = 0;
+ struct hw_regs_s hw;
if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
/* Possibly we should fail if these checks report true */
}
if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL)
return NULL; /* no room in ide_hwifs[] */
- if (hwif->io_ports[IDE_DATA_OFFSET] != base ||
- hwif->io_ports[IDE_CONTROL_OFFSET] != (ctl | 2)) {
- hw_regs_t hw;
-
- memset(&hw, 0, sizeof(hw));
-#ifndef CONFIG_IDE_ARCH_OBSOLETE_INIT
- ide_std_init_ports(&hw, base, ctl | 2);
-#else
- ide_init_hwif_ports(&hw, base, ctl | 2, NULL);
-#endif
- memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports));
- hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
- }
- hwif->chipset = d->chipset ? d->chipset : ide_pci;
+
+ memset(&hw, 0, sizeof(hw));
+ hw.irq = hwif->irq ? hwif->irq : irq;
+ hw.dev = &dev->dev;
+ hw.chipset = d->chipset ? d->chipset : ide_pci;
+ ide_std_init_ports(&hw, base, ctl | 2);
+
+ if (hwif->io_ports[IDE_DATA_OFFSET] == base &&
+ hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2))
+ oldnoprobe = hwif->noprobe;
+
+ ide_init_port_hw(hwif, &hw);
+
+ hwif->noprobe = oldnoprobe;
+
hwif->pci_dev = dev;
hwif->cds = d;
hwif->channel = port;
- if (!hwif->irq)
- hwif->irq = irq;
if (mate) {
hwif->mate = mate;
mate->mate = hwif;
if (d->init_dma) {
d->init_dma(hwif, dma_base);
} else {
- ide_setup_dma(hwif, dma_base, 8);
+ ide_setup_dma(hwif, dma_base);
}
} else {
printk(KERN_INFO "%s: %s Bus-Master DMA disabled "
if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL)
continue;
- /* setup proper ancestral information */
- hwif->gendev.parent = &dev->dev;
-
*(idx + port) = hwif->index;
-
if (d->init_iops)
d->init_iops(hwif);
(d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
hwif->irq = port ? 15 : 14;
- hwif->fixup = d->fixup;
-
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
}
EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
-
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-/*
- * Module interfaces
- */
-
-static int pre_init = 1; /* Before first ordered IDE scan */
-static LIST_HEAD(ide_pci_drivers);
-
-/*
- * __ide_pci_register_driver - attach IDE driver
- * @driver: pci driver
- * @module: owner module of the driver
- *
- * Registers a driver with the IDE layer. The IDE layer arranges that
- * boot time setup is done in the expected device order and then
- * hands the controllers off to the core PCI code to do the rest of
- * the work.
- *
- * Returns are the same as for pci_register_driver
- */
-
-int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
- const char *mod_name)
-{
- if (!pre_init)
- return __pci_register_driver(driver, module, mod_name);
- driver->driver.owner = module;
- list_add_tail(&driver->node, &ide_pci_drivers);
- return 0;
-}
-EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
-
-/**
- * ide_scan_pcidev - find an IDE driver for a device
- * @dev: PCI device to check
- *
- * Look for an IDE driver to handle the device we are considering.
- * This is only used during boot up to get the ordering correct. After
- * boot up the pci layer takes over the job.
- */
-
-static int __init ide_scan_pcidev(struct pci_dev *dev)
-{
- struct list_head *l;
- struct pci_driver *d;
-
- list_for_each(l, &ide_pci_drivers) {
- d = list_entry(l, struct pci_driver, node);
- if (d->id_table) {
- const struct pci_device_id *id =
- pci_match_id(d->id_table, dev);
-
- if (id != NULL && d->probe(dev, id) >= 0) {
- dev->driver = d;
- pci_dev_get(dev);
- return 1;
- }
- }
- }
- return 0;
-}
-
-/**
- * ide_scan_pcibus - perform the initial IDE driver scan
- * @scan_direction: set for reverse order scanning
- *
- * Perform the initial bus rather than driver ordered scan of the
- * PCI drivers. After this all IDE pci handling becomes standard
- * module ordering not traditionally ordered.
- */
-
-void __init ide_scan_pcibus (int scan_direction)
-{
- struct pci_dev *dev = NULL;
- struct pci_driver *d;
- struct list_head *l, *n;
-
- pre_init = 0;
- if (!scan_direction)
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
- ide_scan_pcidev(dev);
- else
- while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
- dev)))
- ide_scan_pcidev(dev);
-
- /*
- * Hand the drivers over to the PCI layer now we
- * are post init.
- */
-
- list_for_each_safe(l, n, &ide_pci_drivers) {
- list_del(l);
- d = list_entry(l, struct pci_driver, node);
- if (__pci_register_driver(d, d->driver.owner,
- d->driver.mod_name))
- printk(KERN_ERR "%s: failed to register %s driver\n",
- __FUNCTION__, d->driver.mod_name);
- }
-}
-#endif
projects / linux-2.6-omap-h63xx.git / blobdiff