ide: __ide_dma_end() -> ide_dma_end()

[linux-2.6-omap-h63xx.git] / drivers / ide / pci / sl82c105.c

diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 73905bcc08fbb0616dca5a5f0fd906ff33069653..84dc33602ff86277bcc69c39484befda8fca018c 100644 (file)
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -17,7 +17,6 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
 
@@ -62,7 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
        if (cmd_off == 0)
                cmd_off = 1;
 
-       if (pio > 2 || ide_dev_has_iordy(drive->id))
+       if (pio > 2 || ata_id_has_iordy(drive->id))
                iordy = 0x40;
 
        return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -208,7 +207,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
 
        DBG(("%s(drive:%s)\n", __func__, drive->name));
 
-       ret = __ide_dma_end(drive);
+       ret = ide_dma_end(drive);
 
        pci_write_config_word(dev, reg, drive->drive_data);
 
@@ -272,7 +271,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
  * channel 0 here at least, but channel 1 has to be enabled by
  * firmware or arch code. We still set both to 16 bits mode.
  */
-static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev)
+static unsigned int init_chipset_sl82c105(struct pci_dev *dev)
 {
        u32 val;
 
@@ -346,21 +345,23 @@ static const struct pci_device_id sl82c105_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);
 
-static struct pci_driver driver = {
+static struct pci_driver sl82c105_pci_driver = {
        .name           = "W82C105_IDE",
        .id_table       = sl82c105_pci_tbl,
        .probe          = sl82c105_init_one,
        .remove         = ide_pci_remove,
+       .suspend        = ide_pci_suspend,
+       .resume         = ide_pci_resume,
 };
 
 static int __init sl82c105_ide_init(void)
 {
-       return ide_pci_register_driver(&driver);
+       return ide_pci_register_driver(&sl82c105_pci_driver);
 }
 
 static void __exit sl82c105_ide_exit(void)
 {
-       pci_unregister_driver(&driver);
+       pci_unregister_driver(&sl82c105_pci_driver);
 }
 
 module_init(sl82c105_ide_init);