]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/ide/pci/ns87415.c
ide: add device flags
[linux-2.6-omap-h63xx.git] / drivers / ide / pci / ns87415.c
index ffefcd15196c709b690bc8348eb2950b5c71e7ea..99e98e5e271c7ed93434e8100c4a0a29d2a7f070 100644 (file)
@@ -11,7 +11,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
@@ -138,7 +137,7 @@ static void __devinit superio_init_iops(struct hwif_s *hwif)
 static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
 
 /*
- * This routine either enables/disables (according to drive->present)
+ * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
  * the IRQ associated with the port (HWIF(drive)),
  * and selects either PIO or DMA handshaking for the next I/O operation.
  */
@@ -154,7 +153,11 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
 
        /* Adjust IRQ enable bit */
        bit = 1 << (8 + hwif->channel);
-       new = drive->present ? (new & ~bit) : (new | bit);
+
+       if (drive->dev_flags & IDE_DFLAG_PRESENT)
+               new &= ~bit;
+       else
+               new |= bit;
 
        /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
        bit   = 1 << (20 + drive->select.b.unit       + (hwif->channel << 1));
@@ -188,7 +191,8 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
 
 static void ns87415_selectproc (ide_drive_t *drive)
 {
-       ns87415_prepare_drive (drive, drive->using_dma);
+       ns87415_prepare_drive(drive,
+                             !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
 }
 
 static int ns87415_dma_end(ide_drive_t *drive)
@@ -274,9 +278,9 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
                do {
                        udelay(50);
                        stat = hwif->tp_ops->read_status(hwif);
-                       if (stat == 0xff)
-                               break;
-               } while ((stat & BUSY_STAT) && --timeout);
+                       if (stat == 0xff)
+                               break;
+               } while ((stat & ATA_BUSY) && --timeout);
 #endif
        }
 
@@ -340,6 +344,8 @@ static struct pci_driver driver = {
        .id_table       = ns87415_pci_tbl,
        .probe          = ns87415_init_one,
        .remove         = ide_pci_remove,
+       .suspend        = ide_pci_suspend,
+       .resume         = ide_pci_resume,
 };
 
 static int __init ns87415_ide_init(void)