* Documentation/ide/ChangeLog.ide-tape.1995-2002
*/
+#define DRV_NAME "ide-tape"
+
#define IDETAPE_VERSION "1.20"
#include <linux/module.h>
DBG_CHRDEV = (1 << 2),
/* all remaining procedures */
DBG_PROCS = (1 << 3),
- /* buffer alloc info (pc_stack & rq_stack) */
- DBG_PCRQ_STACK = (1 << 4),
};
/* define to see debug info */
*/
#define IDETAPE_PC_BUFFER_SIZE 256
-/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
- */
-#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
-
/*
* Some drives (for example, Seagate STT3401A Travan) require a very long
* timeout, because they don't return an interrupt or clear their busy bit
struct kref kref;
/*
- * Since a typical character device operation requires more
- * than one packet command, we provide here enough memory
- * for the maximum of interconnected packet commands.
- * The packet commands are stored in the circular array pc_stack.
- * pc_stack_index points to the last used entry, and warps around
- * to the start when we get to the last array entry.
- *
* pc points to the current processed packet command.
*
* failed_pc points to the last failed packet command, or contains
struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
- /* Packet command stack */
- struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDETAPE_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
+ /* used by REQ_IDETAPE_{READ,WRITE} requests */
+ struct ide_atapi_pc queued_pc;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;
/*
* DSC polling variables.
pc->bh = bh;
}
-/*
- * idetape_next_pc_storage returns a pointer to a place in which we can
- * safely store a packet command, even though we intend to leave the
- * driver. A storage space for a maximum of IDETAPE_PC_STACK packet
- * commands is allocated at initialization time.
- */
-static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
-
- if (tape->pc_stack_index == IDETAPE_PC_STACK)
- tape->pc_stack_index = 0;
- return (&tape->pc_stack[tape->pc_stack_index++]);
-}
-
-/*
- * idetape_next_rq_storage is used along with idetape_next_pc_storage.
- * Since we queue packet commands in the request queue, we need to
- * allocate a request, along with the allocation of a packet command.
- */
-
-/**************************************************************
- * *
- * This should get fixed to use kmalloc(.., GFP_ATOMIC) *
- * followed later on by kfree(). -ml *
- * *
- **************************************************************/
-
-static struct request *idetape_next_rq_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
-
- if (tape->rq_stack_index == IDETAPE_PC_STACK)
- tape->rq_stack_index = 0;
- return (&tape->rq_stack[tape->rq_stack_index++]);
-}
-
/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
pc->req_xfer = 20;
}
-static void idetape_init_rq(struct request *rq, u8 cmd)
-{
- blk_rq_init(NULL, rq);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = cmd;
-}
-
/*
* Generate a new packet command request in front of the request queue, before
* the current request, so that it will be processed immediately, on the next
- * pass through the driver. The function below is called from the request
- * handling part of the driver (the "bottom" part). Safe storage for the request
- * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
- *
- * Memory for those requests is pre-allocated at initialization time, and is
- * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
- * the maximum possible number of inter-dependent packet commands.
- *
- * The higher level of the driver - The ioctl handler and the character device
- * handling functions should queue request to the lower level part and wait for
- * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
+ * pass through the driver.
*/
static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
struct request *rq)
{
struct ide_tape_obj *tape = drive->driver_data;
- idetape_init_rq(rq, REQ_IDETAPE_PC1);
+ blk_rq_init(NULL, rq);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd_flags |= REQ_PREEMPT;
rq->buffer = (char *) pc;
rq->rq_disk = tape->disk;
memcpy(rq->cmd, pc->c, 12);
+ rq->cmd[13] = REQ_IDETAPE_PC1;
ide_do_drive_cmd(drive, rq);
}
*/
static void idetape_retry_pc(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc;
- struct request *rq;
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct request *rq = &tape->request_sense_rq;
+ struct ide_atapi_pc *pc = &tape->request_sense_pc;
(void)ide_read_error(drive);
- pc = idetape_next_pc_storage(drive);
- rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
idetape_queue_pc_head(drive, pc, rq);
stat = hwif->tp_ops->read_status(hwif);
- if (stat & SEEK_STAT) {
- if (stat & ERR_STAT) {
+ if (stat & ATA_DSC) {
+ if (stat & ATA_ERR) {
/* Error detected */
if (pc->c[0] != TEST_UNIT_READY)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
struct request *postponed_rq = tape->postponed_rq;
u8 stat;
- debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
- " current_nr_sectors: %d\n",
- rq->sector, rq->nr_sectors, rq->current_nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu,"
+ " current_nr_sectors: %u\n",
+ (unsigned long long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);
if (!blk_special_request(rq)) {
/* We do not support buffer cache originated requests. */
}
if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
return ide_stopped;
}
if (rq->cmd[13] & REQ_IDETAPE_READ) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
goto out;
}
if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
goto out;
}
/*
* We add a special packet command request to the tail of the request queue, and
- * wait for it to be serviced. This is not to be called from within the request
- * handling part of the driver! We allocate here data on the stack and it is
- * valid until the request is finished. This is not the case for the bottom part
- * of the driver, where we are always leaving the functions to wait for an
- * interrupt or a timer event.
- *
- * From the bottom part of the driver, we should allocate safe memory using
- * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
- * to the request list without waiting for it to be serviced! In that case, we
- * usually use idetape_queue_pc_head().
+ * wait for it to be serviced.
*/
static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
return 0;
}
-/*
- * check the contents of the ATAPI IDENTIFY command results. We return:
- *
- * 1 - If the tape can be supported by us, based on the information we have so
- * far.
- *
- * 0 - If this tape driver is not currently supported by us.
- */
-static int idetape_identify_device(ide_drive_t *drive)
-{
- u8 gcw[2], protocol, device_type, removable, packet_size;
-
- if (drive->id_read == 0)
- return 1;
-
- *((unsigned short *) &gcw) = drive->id->config;
-
- protocol = (gcw[1] & 0xC0) >> 6;
- device_type = gcw[1] & 0x1F;
- removable = !!(gcw[0] & 0x80);
- packet_size = gcw[0] & 0x3;
-
- /* Check that we can support this device */
- if (protocol != 2)
- printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
- protocol);
- else if (device_type != 1)
- printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
- "to tape\n", device_type);
- else if (!removable)
- printk(KERN_ERR "ide-tape: The removable flag is not set\n");
- else if (packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
- " bytes\n", packet_size);
- } else
- return 1;
- return 0;
-}
-
static void idetape_get_inquiry_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- char fw_rev[6], vendor_id[10], product_id[18];
+ char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc)) {
memcpy(product_id, &pc.buf[16], 16);
memcpy(fw_rev, &pc.buf[32], 4);
- ide_fixstring(vendor_id, 10, 0);
- ide_fixstring(product_id, 18, 0);
- ide_fixstring(fw_rev, 6, 0);
+ ide_fixstring(vendor_id, 8, 0);
+ ide_fixstring(product_id, 16, 0);
+ ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
drive->name, tape->name, vendor_id, product_id, fw_rev);
}
}
#ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 2, (u16 *)&tape->caps[16], NULL);
- ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 1, (u16 *)&tape->caps[14], NULL);
- ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1024, &tape->buffer_size, NULL);
- ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
- IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
- NULL);
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
- 1, &drive->dsc_overlap, NULL);
- ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1, &tape->avg_speed, NULL);
- ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
- 1, &tape->debug_mask, NULL);
-}
-#else
-static inline void idetape_add_settings(ide_drive_t *drive) { ; }
+#define ide_tape_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ return tape->field; \
+}
+
+#define ide_tape_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ tape->field = arg; \
+ return 0; \
+}
+
+#define ide_tape_devset_rw(_name, _min, _max, _field, _mulf, _divf) \
+ide_tape_devset_get(_name, _field) \
+ide_tape_devset_set(_name, _field) \
+__IDE_DEVSET(_name, S_RW, _min, _max, get_##_name, set_##_name, _mulf, _divf)
+
+#define ide_tape_devset_r(_name, _min, _max, _field, _mulf, _divf) \
+ide_tape_devset_get(_name, _field) \
+__IDE_DEVSET(_name, S_READ, _min, _max, get_##_name, NULL, _mulf, _divf)
+
+static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
+static int divf_tdsc(ide_drive_t *drive) { return HZ; }
+static int divf_buffer(ide_drive_t *drive) { return 2; }
+static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
+
+ide_devset_rw(dsc_overlap, 0, 1, dsc_overlap);
+
+ide_tape_devset_rw(debug_mask, 0, 0xffff, debug_mask, NULL, NULL);
+ide_tape_devset_rw(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
+ best_dsc_rw_freq, mulf_tdsc, divf_tdsc);
+
+ide_tape_devset_r(avg_speed, 0, 0xffff, avg_speed, NULL, NULL);
+ide_tape_devset_r(speed, 0, 0xffff, caps[14], NULL, NULL);
+ide_tape_devset_r(buffer, 0, 0xffff, caps[16], NULL, divf_buffer);
+ide_tape_devset_r(buffer_size, 0, 0xffff, buffer_size, NULL, divf_buffer_size);
+
+static const struct ide_devset *idetape_settings[] = {
+ &ide_devset_avg_speed,
+ &ide_devset_buffer,
+ &ide_devset_buffer_size,
+ &ide_devset_debug_mask,
+ &ide_devset_dsc_overlap,
+ &ide_devset_speed,
+ &ide_devset_tdsc,
+ NULL
+};
#endif
/*
drive->dsc_overlap = 0;
}
/* Seagate Travan drives do not support DSC overlap. */
- if (strstr(drive->id->model, "Seagate STT3401"))
+ if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
drive->dsc_overlap = 0;
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- tape->pc = tape->pc_stack;
- *((unsigned short *) &gcw) = drive->id->config;
+
+ *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];
/* Command packet DRQ type */
if (((gcw[0] & 0x60) >> 5) == 1)
tape->best_dsc_rw_freq * 1000 / HZ,
drive->using_dma ? ", DMA":"");
- idetape_add_settings(drive);
+ ide_proc_register_driver(drive, tape->driver);
}
static void ide_tape_remove(ide_drive_t *drive)
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
.media = ide_tape,
- .supports_dsc_overlap = 1,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idetape_proc,
+ .settings = idetape_settings,
#endif
};
if (!strstr("ide-tape", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_tape)
goto failed;
- if (!idetape_identify_device(drive)) {
+
+ if (drive->id_read == 1 && !ide_check_atapi_device(drive, DRV_NAME)) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
ide_init_disk(g, drive);
- ide_proc_register_driver(drive, &idetape_driver);
-
kref_init(&tape->kref);
tape->drive = drive;
projects / linux-2.6-omap-h63xx.git / blobdiff