* Documentation/ide/ChangeLog.ide-tape.1995-2002
*/
+#define DRV_NAME "ide-tape"
+
#define IDETAPE_VERSION "1.20"
#include <linux/module.h>
DBG_CHRDEV = (1 << 2),
/* all remaining procedures */
DBG_PROCS = (1 << 3),
- /* buffer alloc info (pc_stack & rq_stack) */
- DBG_PCRQ_STACK = (1 << 4),
};
/* define to see debug info */
*/
#define IDETAPE_MAX_PC_RETRIES 3
-/*
- * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
- * bytes. This is used for several packet commands (Not for READ/WRITE commands)
- */
-#define IDETAPE_PC_BUFFER_SIZE 256
-
-/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
- */
-#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
-
/*
* Some drives (for example, Seagate STT3401A Travan) require a very long
* timeout, because they don't return an interrupt or clear their busy bit
#define IDETAPE_LU_RETENSION_MASK 2
#define IDETAPE_LU_EOT_MASK 4
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
- REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
- REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
- REQ_IDETAPE_READ = (1 << 2),
- REQ_IDETAPE_WRITE = (1 << 3),
-};
-
/* Error codes returned in rq->errors to the higher part of the driver. */
#define IDETAPE_ERROR_GENERAL 101
#define IDETAPE_ERROR_FILEMARK 102
struct kref kref;
/*
- * Since a typical character device operation requires more
- * than one packet command, we provide here enough memory
- * for the maximum of interconnected packet commands.
- * The packet commands are stored in the circular array pc_stack.
- * pc_stack_index points to the last used entry, and warps around
- * to the start when we get to the last array entry.
- *
* pc points to the current processed packet command.
*
* failed_pc points to the last failed packet command, or contains
struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
- /* Packet command stack */
- struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDETAPE_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
+ /* used by REQ_IDETAPE_{READ,WRITE} requests */
+ struct ide_atapi_pc queued_pc;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;
/*
* DSC polling variables.
mutex_lock(&idetape_ref_mutex);
tape = ide_tape_g(disk);
if (tape) {
- kref_get(&tape->kref);
- if (ide_device_get(tape->drive)) {
- kref_put(&tape->kref, ide_tape_release);
+ if (ide_device_get(tape->drive))
tape = NULL;
- }
+ else
+ kref_get(&tape->kref);
}
mutex_unlock(&idetape_ref_mutex);
return tape;
static void ide_tape_put(struct ide_tape_obj *tape)
{
+ ide_drive_t *drive = tape->drive;
+
mutex_lock(&idetape_ref_mutex);
- ide_device_put(tape->drive);
kref_put(&tape->kref, ide_tape_release);
+ ide_device_put(drive);
mutex_unlock(&idetape_ref_mutex);
}
pc->bh = bh;
}
-/*
- * idetape_next_pc_storage returns a pointer to a place in which we can
- * safely store a packet command, even though we intend to leave the
- * driver. A storage space for a maximum of IDETAPE_PC_STACK packet
- * commands is allocated at initialization time.
- */
-static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
-
- if (tape->pc_stack_index == IDETAPE_PC_STACK)
- tape->pc_stack_index = 0;
- return (&tape->pc_stack[tape->pc_stack_index++]);
-}
-
-/*
- * idetape_next_rq_storage is used along with idetape_next_pc_storage.
- * Since we queue packet commands in the request queue, we need to
- * allocate a request, along with the allocation of a packet command.
- */
-
-/**************************************************************
- * *
- * This should get fixed to use kmalloc(.., GFP_ATOMIC) *
- * followed later on by kfree(). -ml *
- * *
- **************************************************************/
-
-static struct request *idetape_next_rq_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
-
- if (tape->rq_stack_index == IDETAPE_PC_STACK)
- tape->rq_stack_index = 0;
- return (&tape->rq_stack[tape->rq_stack_index++]);
-}
-
/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
idetape_end_request(drive, uptodate, 0);
}
-static void idetape_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc->c, 0, 12);
- pc->retries = 0;
- pc->flags = 0;
- pc->req_xfer = 0;
- pc->buf = pc->pc_buf;
- pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
- pc->bh = NULL;
- pc->b_data = NULL;
-}
-
static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->req_xfer = 20;
}
-static void idetape_init_rq(struct request *rq, u8 cmd)
-{
- blk_rq_init(NULL, rq);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = cmd;
-}
-
-/*
- * Generate a new packet command request in front of the request queue, before
- * the current request, so that it will be processed immediately, on the next
- * pass through the driver. The function below is called from the request
- * handling part of the driver (the "bottom" part). Safe storage for the request
- * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
- *
- * Memory for those requests is pre-allocated at initialization time, and is
- * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
- * the maximum possible number of inter-dependent packet commands.
- *
- * The higher level of the driver - The ioctl handler and the character device
- * handling functions should queue request to the lower level part and wait for
- * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
- */
-static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
- struct request *rq)
-{
- struct ide_tape_obj *tape = drive->driver_data;
-
- idetape_init_rq(rq, REQ_IDETAPE_PC1);
- rq->cmd_flags |= REQ_PREEMPT;
- rq->buffer = (char *) pc;
- rq->rq_disk = tape->disk;
- memcpy(rq->cmd, pc->c, 12);
- ide_do_drive_cmd(drive, rq);
-}
-
/*
* idetape_retry_pc is called when an error was detected during the
* last packet command. We queue a request sense packet command in
*/
static void idetape_retry_pc(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc;
- struct request *rq;
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct request *rq = &tape->request_sense_rq;
+ struct ide_atapi_pc *pc = &tape->request_sense_pc;
(void)ide_read_error(drive);
- pc = idetape_next_pc_storage(drive);
- rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- idetape_queue_pc_head(drive, pc, rq);
+ ide_queue_pc_head(drive, tape->disk, pc, rq);
}
/*
idetape_postpone_request(drive);
}
-static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount, int write)
{
if (write)
idetape_output_buffers(drive, pc, bcount);
else
idetape_input_buffers(drive, pc, bcount);
+
+ return bcount;
}
/*
/* A mode sense command is used to "sense" tape parameters. */
static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = MODE_SENSE;
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
/* DBD = 1 - Don't return block descriptors */
stat = hwif->tp_ops->read_status(hwif);
- if (stat & SEEK_STAT) {
- if (stat & ERR_STAT) {
+ if (stat & ATA_DSC) {
+ if (stat & ATA_ERR) {
/* Error detected */
if (pc->c[0] != TEST_UNIT_READY)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
struct idetape_bh *bh = (struct idetape_bh *)rq->special;
unsigned int length = rq->current_nr_sectors;
- idetape_init_pc(pc);
+ ide_init_pc(pc);
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
pc->bh = bh;
struct request *postponed_rq = tape->postponed_rq;
u8 stat;
- debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
- " current_nr_sectors: %d\n",
- rq->sector, rq->nr_sectors, rq->current_nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu,"
+ " current_nr_sectors: %u\n",
+ (unsigned long long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);
if (!blk_special_request(rq)) {
/* We do not support buffer cache originated requests. */
}
if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
return ide_stopped;
}
if (rq->cmd[13] & REQ_IDETAPE_READ) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
goto out;
}
if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
goto out;
}
static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, int write_filemark)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = TEST_UNIT_READY;
}
-/*
- * We add a special packet command request to the tail of the request queue, and
- * wait for it to be serviced. This is not to be called from within the request
- * handling part of the driver! We allocate here data on the stack and it is
- * valid until the request is finished. This is not the case for the bottom part
- * of the driver, where we are always leaving the functions to wait for an
- * interrupt or a timer event.
- *
- * From the bottom part of the driver, we should allocate safe memory using
- * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
- * to the request list without waiting for it to be serviced! In that case, we
- * usually use idetape_queue_pc_head().
- */
-static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq;
- int error;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = REQ_IDETAPE_PC1;
- rq->buffer = (char *)pc;
- memcpy(rq->cmd, pc->c, 12);
- error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
- blk_put_request(rq);
- return error;
-}
-
static void idetape_create_load_unload_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, int cmd)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = START_STOP;
pc->c[4] = cmd;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int load_attempted = 0;
timeout += jiffies;
while (time_before(jiffies, timeout)) {
idetape_create_test_unit_ready_cmd(&pc);
- if (!idetape_queue_pc_tail(drive, &pc))
+ if (!ide_queue_pc_tail(drive, disk, &pc))
return 0;
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
|| (tape->asc == 0x3A)) {
return -ENOMEDIUM;
idetape_create_load_unload_cmd(drive, &pc,
IDETAPE_LU_LOAD_MASK);
- idetape_queue_pc_tail(drive, &pc);
+ ide_queue_pc_tail(drive, disk, &pc);
load_attempted = 1;
/* not about to be ready */
} else if (!(tape->sense_key == 2 && tape->asc == 4 &&
static int idetape_flush_tape_buffers(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
struct ide_atapi_pc pc;
int rc;
idetape_create_write_filemark_cmd(drive, &pc, 0);
- rc = idetape_queue_pc_tail(drive, &pc);
+ rc = ide_queue_pc_tail(drive, tape->disk, &pc);
if (rc)
return rc;
idetape_wait_ready(drive, 60 * 5 * HZ);
static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = READ_POSITION;
pc->req_xfer = 20;
}
debug_log(DBG_PROCS, "Enter %s\n", __func__);
idetape_create_read_position_cmd(&pc);
- if (idetape_queue_pc_tail(drive, &pc))
+ if (ide_queue_pc_tail(drive, tape->disk, &pc))
return -1;
position = tape->first_frame;
return position;
struct ide_atapi_pc *pc,
unsigned int block, u8 partition, int skip)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = POSITION_TO_ELEMENT;
pc->c[1] = 2;
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-static int idetape_create_prevent_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int prevent)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- /* device supports locking according to capabilities page */
- if (!(tape->caps[6] & 0x01))
- return 0;
-
- idetape_init_pc(pc);
- pc->c[0] = ALLOW_MEDIUM_REMOVAL;
- pc->c[4] = prevent;
- return 1;
-}
-
static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
u8 partition, int skip)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
int retval;
struct ide_atapi_pc pc;
__ide_tape_discard_merge_buffer(drive);
idetape_wait_ready(drive, 60 * 5 * HZ);
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return (retval);
idetape_create_read_position_cmd(&pc);
- return (idetape_queue_pc_tail(drive, &pc));
+ return ide_queue_pc_tail(drive, disk, &pc);
}
static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = INQUIRY;
pc->c[4] = 254;
pc->req_xfer = 254;
static void idetape_create_rewind_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = REZERO_UNIT;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = ERASE;
pc->c[1] = 1;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = SPACE;
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
*/
static int idetape_rewind_tape(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
int retval;
struct ide_atapi_pc pc;
- idetape_tape_t *tape;
- tape = drive->driver_data;
debug_log(DBG_SENSE, "Enter %s\n", __func__);
idetape_create_rewind_cmd(drive, &pc);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return retval;
idetape_create_read_position_cmd(&pc);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return retval;
return 0;
int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
case MTBSF:
idetape_create_space_cmd(&pc, mt_count - count,
IDETAPE_SPACE_OVER_FILEMARK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTFSFM:
case MTBSFM:
if (!sprev)
static int idetape_write_filemark(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
struct ide_atapi_pc pc;
/* Write a filemark */
idetape_create_write_filemark_cmd(drive, &pc, 1);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
return -EIO;
}
static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int i, retval;
ide_tape_discard_merge_buffer(drive, 0);
idetape_create_load_unload_cmd(drive, &pc,
IDETAPE_LU_LOAD_MASK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTUNLOAD:
case MTOFFL:
/*
* attempting to eject.
*/
if (tape->door_locked) {
- if (idetape_create_prevent_cmd(drive, &pc, 0))
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
+ if (!ide_set_media_lock(drive, disk, 0))
+ tape->door_locked = DOOR_UNLOCKED;
}
ide_tape_discard_merge_buffer(drive, 0);
idetape_create_load_unload_cmd(drive, &pc,
!IDETAPE_LU_LOAD_MASK);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (!retval)
clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
return retval;
ide_tape_discard_merge_buffer(drive, 0);
idetape_create_load_unload_cmd(drive, &pc,
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTEOM:
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTERASE:
(void)idetape_rewind_tape(drive);
idetape_create_erase_cmd(&pc);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTSETBLK:
if (mt_count) {
if (mt_count < tape->blk_size ||
case MTFSR:
case MTBSR:
case MTLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 1))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_set_media_lock(drive, disk, 1);
if (retval)
return retval;
tape->door_locked = DOOR_EXPLICITLY_LOCKED;
return 0;
case MTUNLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 0))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_set_media_lock(drive, disk, 0);
if (retval)
return retval;
tape->door_locked = DOOR_UNLOCKED;
struct ide_atapi_pc pc;
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
if (tape->blk_size == 0) {
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
unsigned int minor = iminor(inode), i = minor & ~0xc0;
ide_drive_t *drive;
idetape_tape_t *tape;
- struct ide_atapi_pc pc;
int retval;
if (i >= MAX_HWIFS * MAX_DRIVES)
/* Lock the tape drive door so user can't eject. */
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
- if (idetape_create_prevent_cmd(drive, &pc, 1)) {
- if (!idetape_queue_pc_tail(drive, &pc)) {
- if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
- tape->door_locked = DOOR_LOCKED;
- }
+ if (!ide_set_media_lock(drive, tape->disk, 1)) {
+ if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
+ tape->door_locked = DOOR_LOCKED;
}
}
unlock_kernel();
{
struct ide_tape_obj *tape = ide_tape_f(filp);
ide_drive_t *drive = tape->drive;
- struct ide_atapi_pc pc;
unsigned int minor = iminor(inode);
lock_kernel();
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
- if (idetape_create_prevent_cmd(drive, &pc, 0)) {
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
- }
+ if (!ide_set_media_lock(drive, tape->disk, 0))
+ tape->door_locked = DOOR_UNLOCKED;
}
}
clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
return 0;
}
-/*
- * check the contents of the ATAPI IDENTIFY command results. We return:
- *
- * 1 - If the tape can be supported by us, based on the information we have so
- * far.
- *
- * 0 - If this tape driver is not currently supported by us.
- */
-static int idetape_identify_device(ide_drive_t *drive)
-{
- u8 gcw[2], protocol, device_type, removable, packet_size;
-
- if (drive->id_read == 0)
- return 1;
-
- *((unsigned short *) &gcw) = drive->id->config;
-
- protocol = (gcw[1] & 0xC0) >> 6;
- device_type = gcw[1] & 0x1F;
- removable = !!(gcw[0] & 0x80);
- packet_size = gcw[0] & 0x3;
-
- /* Check that we can support this device */
- if (protocol != 2)
- printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
- protocol);
- else if (device_type != 1)
- printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
- "to tape\n", device_type);
- else if (!removable)
- printk(KERN_ERR "ide-tape: The removable flag is not set\n");
- else if (packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
- " bytes\n", packet_size);
- } else
- return 1;
- return 0;
-}
-
static void idetape_get_inquiry_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- char fw_rev[6], vendor_id[10], product_id[18];
+ char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
tape->name);
return;
memcpy(product_id, &pc.buf[16], 16);
memcpy(fw_rev, &pc.buf[32], 4);
- ide_fixstring(vendor_id, 10, 0);
- ide_fixstring(product_id, 18, 0);
- ide_fixstring(fw_rev, 6, 0);
+ ide_fixstring(vendor_id, 8, 0);
+ ide_fixstring(product_id, 16, 0);
+ ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
drive->name, tape->name, vendor_id, product_id, fw_rev);
}
u8 speed, max_speed;
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
" some default values\n");
tape->blk_size = 512;
}
memcpy(&tape->caps, caps, 20);
+
+ /* device lacks locking support according to capabilities page */
+ if ((caps[6] & 1) == 0)
+ drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+
if (caps[7] & 0x02)
tape->blk_size = 512;
else if (caps[7] & 0x04)
}
#ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 2, (u16 *)&tape->caps[16], NULL);
- ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 1, (u16 *)&tape->caps[14], NULL);
- ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1024, &tape->buffer_size, NULL);
- ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
- IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
- NULL);
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
- 1, &drive->dsc_overlap, NULL);
- ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1, &tape->avg_speed, NULL);
- ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
- 1, &tape->debug_mask, NULL);
-}
-#else
-static inline void idetape_add_settings(ide_drive_t *drive) { ; }
+#define ide_tape_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ return tape->field; \
+}
+
+#define ide_tape_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ tape->field = arg; \
+ return 0; \
+}
+
+#define ide_tape_devset_rw(_name, _min, _max, _field, _mulf, _divf) \
+ide_tape_devset_get(_name, _field) \
+ide_tape_devset_set(_name, _field) \
+__IDE_DEVSET(_name, S_RW, _min, _max, get_##_name, set_##_name, _mulf, _divf)
+
+#define ide_tape_devset_r(_name, _min, _max, _field, _mulf, _divf) \
+ide_tape_devset_get(_name, _field) \
+__IDE_DEVSET(_name, S_READ, _min, _max, get_##_name, NULL, _mulf, _divf)
+
+static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
+static int divf_tdsc(ide_drive_t *drive) { return HZ; }
+static int divf_buffer(ide_drive_t *drive) { return 2; }
+static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
+
+ide_devset_rw(dsc_overlap, 0, 1, dsc_overlap);
+
+ide_tape_devset_rw(debug_mask, 0, 0xffff, debug_mask, NULL, NULL);
+ide_tape_devset_rw(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
+ best_dsc_rw_freq, mulf_tdsc, divf_tdsc);
+
+ide_tape_devset_r(avg_speed, 0, 0xffff, avg_speed, NULL, NULL);
+ide_tape_devset_r(speed, 0, 0xffff, caps[14], NULL, NULL);
+ide_tape_devset_r(buffer, 0, 0xffff, caps[16], NULL, divf_buffer);
+ide_tape_devset_r(buffer_size, 0, 0xffff, buffer_size, NULL, divf_buffer_size);
+
+static const struct ide_devset *idetape_settings[] = {
+ &ide_devset_avg_speed,
+ &ide_devset_buffer,
+ &ide_devset_buffer_size,
+ &ide_devset_debug_mask,
+ &ide_devset_dsc_overlap,
+ &ide_devset_speed,
+ &ide_devset_tdsc,
+ NULL
+};
#endif
/*
drive->dsc_overlap = 0;
}
/* Seagate Travan drives do not support DSC overlap. */
- if (strstr(drive->id->model, "Seagate STT3401"))
+ if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
drive->dsc_overlap = 0;
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- tape->pc = tape->pc_stack;
- *((unsigned short *) &gcw) = drive->id->config;
+
+ *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];
/* Command packet DRQ type */
if (((gcw[0] & 0x60) >> 5) == 1)
tape->best_dsc_rw_freq * 1000 / HZ,
drive->using_dma ? ", DMA":"");
- idetape_add_settings(drive);
+ ide_proc_register_driver(drive, tape->driver);
}
static void ide_tape_remove(ide_drive_t *drive)
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
.media = ide_tape,
- .supports_dsc_overlap = 1,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idetape_proc,
+ .settings = idetape_settings,
#endif
};
if (!strstr("ide-tape", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_tape)
goto failed;
- if (!idetape_identify_device(drive)) {
+
+ if (drive->id_read == 1 && !ide_check_atapi_device(drive, DRV_NAME)) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
ide_init_disk(g, drive);
- ide_proc_register_driver(drive, &idetape_driver);
-
kref_init(&tape->kref);
tape->drive = drive;
projects / linux-2.6-omap-h63xx.git / blobdiff