*/
#define IDETAPE_MAX_PC_RETRIES 3
-/*
- * Some drives (for example, Seagate STT3401A Travan) require a very long
- * timeout, because they don't return an interrupt or clear their busy bit
- * until after the command completes (even retension commands).
- */
-#define IDETAPE_WAIT_CMD (900*HZ)
-
/*
* The following parameter is used to select the point in the internal tape fifo
* in which we will start to refill the buffer. Decreasing the following
struct kref kref;
/*
- * pc points to the current processed packet command.
- *
* failed_pc points to the last failed packet command, or contains
* NULL if we do not need to retry any packet command. This is
* required since an additional packet command is needed before the
* retry, to get detailed information on what went wrong.
*/
- /* Current packet command */
- struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used by REQ_IDETAPE_{READ,WRITE} requests */
struct ide_atapi_pc queued_pc;
- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
/*
* DSC polling variables.
*
return 0;
}
-static void ide_tape_callback(ide_drive_t *drive)
+static void ide_tape_handle_dsc(ide_drive_t *);
+
+static void ide_tape_callback(ide_drive_t *drive, int dsc)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ if (dsc)
+ ide_tape_handle_dsc(drive);
+
if (tape->failed_pc == pc)
tape->failed_pc = NULL;
if (pc->error)
uptodate = pc->error;
} else if (pc->c[0] == READ_POSITION && uptodate) {
- u8 *readpos = tape->pc->buf;
+ u8 *readpos = pc->buf;
debug_log(DBG_SENSE, "BOP - %s\n",
(readpos[0] & 0x80) ? "Yes" : "No");
static void idetape_retry_pc(ide_drive_t *drive)
{
struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq = &tape->request_sense_rq;
- struct ide_atapi_pc *pc = &tape->request_sense_pc;
+ struct request *rq = &drive->request_sense_rq;
+ struct ide_atapi_pc *pc = &drive->request_sense_pc;
(void)ide_read_error(drive);
idetape_create_request_sense_cmd(pc);
*/
static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
- NULL, idetape_update_buffers, idetape_retry_pc,
- ide_tape_handle_dsc, ide_tape_io_buffers);
+ return ide_pc_intr(drive, idetape_pc_intr, idetape_update_buffers,
+ idetape_retry_pc, ide_tape_io_buffers);
}
/*
* Packet Command Interface
*
- * The current Packet Command is available in tape->pc, and will not change
+ * The current Packet Command is available in drive->pc, and will not change
* until we finish handling it. Each packet command is associated with a
* callback function that will be called when the command is finished.
*
*/
static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
+ return ide_transfer_pc(drive, idetape_pc_intr, WAIT_TAPE_CMD, NULL);
}
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
{
idetape_tape_t *tape = drive->driver_data;
- if (tape->pc->c[0] == REQUEST_SENSE &&
+ if (drive->pc->c[0] == REQUEST_SENSE &&
pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
"Two request sense in serial were issued\n");
if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
tape->failed_pc = pc;
+
/* Set the current packet command */
- tape->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
(pc->flags & PC_FLAG_ABORT)) {
pc->error = IDETAPE_ERROR_GENERAL;
}
tape->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
- return ide_issue_pc(drive, pc, idetape_transfer_pc,
- IDETAPE_WAIT_CMD, NULL);
+ return ide_issue_pc(drive, idetape_transfer_pc, WAIT_TAPE_CMD, NULL);
}
/* A mode sense command is used to "sense" tape parameters. */
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
u8 stat;
stat = hwif->tp_ops->read_status(hwif);
pc->error = IDETAPE_ERROR_GENERAL;
tape->failed_pc = NULL;
}
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
}
/* Retry a failed packet command */
- if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
+ if (tape->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
pc = tape->failed_pc;
goto out;
}
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = TEST_UNIT_READY;
-}
-
-static void idetape_create_load_unload_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int cmd)
-{
- ide_init_pc(pc);
- pc->c[0] = START_STOP;
- pc->c[4] = cmd;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
{
idetape_tape_t *tape = drive->driver_data;
struct gendisk *disk = tape->disk;
- struct ide_atapi_pc pc;
int load_attempted = 0;
/* Wait for the tape to become ready */
set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
- idetape_create_test_unit_ready_cmd(&pc);
- if (!ide_queue_pc_tail(drive, disk, &pc))
+ if (ide_do_test_unit_ready(drive, disk) == 0)
return 0;
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
|| (tape->asc == 0x3A)) {
/* no media */
if (load_attempted)
return -ENOMEDIUM;
- idetape_create_load_unload_cmd(drive, &pc,
- IDETAPE_LU_LOAD_MASK);
- ide_queue_pc_tail(drive, disk, &pc);
+ ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
load_attempted = 1;
/* not about to be ready */
} else if (!(tape->sense_key == 2 && tape->asc == 4 &&
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-static int idetape_create_prevent_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int prevent)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- /* device supports locking according to capabilities page */
- if (!(tape->caps[6] & 0x01))
- return 0;
-
- ide_init_pc(pc);
- pc->c[0] = ALLOW_MEDIUM_REMOVAL;
- pc->c[4] = prevent;
- return 1;
-}
-
-static int ide_tape_set_media_lock(ide_drive_t *drive, int on)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct ide_atapi_pc pc;
-
- if (!idetape_create_prevent_cmd(drive, &pc, on))
- return 0;
-
- return ide_queue_pc_tail(drive, tape->disk, &pc);
-}
-
static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
return 0;
case MTLOAD:
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
- IDETAPE_LU_LOAD_MASK);
- return ide_queue_pc_tail(drive, disk, &pc);
+ return ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
case MTUNLOAD:
case MTOFFL:
/*
* attempting to eject.
*/
if (tape->door_locked) {
- if (!ide_tape_set_media_lock(drive, 0))
+ if (!ide_set_media_lock(drive, disk, 0))
tape->door_locked = DOOR_UNLOCKED;
}
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
- !IDETAPE_LU_LOAD_MASK);
- retval = ide_queue_pc_tail(drive, disk, &pc);
+ retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
if (!retval)
clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
return retval;
return idetape_flush_tape_buffers(drive);
case MTRETEN:
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
+ return ide_do_start_stop(drive, disk,
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- return ide_queue_pc_tail(drive, disk, &pc);
case MTEOM:
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
return ide_queue_pc_tail(drive, disk, &pc);
case MTFSR:
case MTBSR:
case MTLOCK:
- retval = ide_tape_set_media_lock(drive, 1);
+ retval = ide_set_media_lock(drive, disk, 1);
if (retval)
return retval;
tape->door_locked = DOOR_EXPLICITLY_LOCKED;
return 0;
case MTUNLOCK:
- retval = ide_tape_set_media_lock(drive, 0);
+ retval = ide_set_media_lock(drive, disk, 0);
if (retval)
return retval;
tape->door_locked = DOOR_UNLOCKED;
/* Lock the tape drive door so user can't eject. */
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
- if (!ide_tape_set_media_lock(drive, 1)) {
+ if (!ide_set_media_lock(drive, tape->disk, 1)) {
if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
tape->door_locked = DOOR_LOCKED;
}
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
- if (!ide_tape_set_media_lock(drive, 0))
+ if (!ide_set_media_lock(drive, tape->disk, 0))
tape->door_locked = DOOR_UNLOCKED;
}
}
}
memcpy(&tape->caps, caps, 20);
+
+ /* device lacks locking support according to capabilities page */
+ if ((caps[6] & 1) == 0)
+ drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+
if (caps[7] & 0x02)
tape->blk_size = 512;
else if (caps[7] & 0x04)
return 0; \
}
-#define ide_tape_devset_rw(_name, _min, _max, _field, _mulf, _divf) \
+#define ide_tape_devset_rw_field(_name, _field) \
ide_tape_devset_get(_name, _field) \
ide_tape_devset_set(_name, _field) \
-__IDE_DEVSET(_name, S_RW, _min, _max, get_##_name, set_##_name, _mulf, _divf)
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-#define ide_tape_devset_r(_name, _min, _max, _field, _mulf, _divf) \
+#define ide_tape_devset_r_field(_name, _field) \
ide_tape_devset_get(_name, _field) \
-__IDE_DEVSET(_name, S_READ, _min, _max, get_##_name, NULL, _mulf, _divf)
+IDE_DEVSET(_name, 0, get_##_name, NULL)
static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
static int divf_tdsc(ide_drive_t *drive) { return HZ; }
static int divf_buffer(ide_drive_t *drive) { return 2; }
static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
-ide_devset_rw(dsc_overlap, 0, 1, dsc_overlap);
-
-ide_tape_devset_rw(debug_mask, 0, 0xffff, debug_mask, NULL, NULL);
-ide_tape_devset_rw(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
- best_dsc_rw_freq, mulf_tdsc, divf_tdsc);
-
-ide_tape_devset_r(avg_speed, 0, 0xffff, avg_speed, NULL, NULL);
-ide_tape_devset_r(speed, 0, 0xffff, caps[14], NULL, NULL);
-ide_tape_devset_r(buffer, 0, 0xffff, caps[16], NULL, divf_buffer);
-ide_tape_devset_r(buffer_size, 0, 0xffff, buffer_size, NULL, divf_buffer_size);
-
-static const struct ide_devset *idetape_settings[] = {
- &ide_devset_avg_speed,
- &ide_devset_buffer,
- &ide_devset_buffer_size,
- &ide_devset_debug_mask,
- &ide_devset_dsc_overlap,
- &ide_devset_speed,
- &ide_devset_tdsc,
- NULL
+ide_devset_rw_field(dsc_overlap, dsc_overlap);
+
+ide_tape_devset_rw_field(debug_mask, debug_mask);
+ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
+
+ide_tape_devset_r_field(avg_speed, avg_speed);
+ide_tape_devset_r_field(speed, caps[14]);
+ide_tape_devset_r_field(buffer, caps[16]);
+ide_tape_devset_r_field(buffer_size, buffer_size);
+
+static const struct ide_proc_devset idetape_settings[] = {
+ __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
+ __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
+ __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
+ __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
+ mulf_tdsc, divf_tdsc),
+ { 0 },
};
#endif