static void generic_id(ide_drive_t *drive)
{
- drive->id->cyls = drive->cyl;
- drive->id->heads = drive->head;
- drive->id->sectors = drive->sect;
- drive->id->cur_cyls = drive->cyl;
- drive->id->cur_heads = drive->head;
- drive->id->cur_sectors = drive->sect;
+ u16 *id = drive->id;
+
+ id[ATA_ID_CUR_CYLS] = id[ATA_ID_CYLS] = drive->cyl;
+ id[ATA_ID_CUR_HEADS] = id[ATA_ID_HEADS] = drive->head;
+ id[ATA_ID_CUR_SECTORS] = id[ATA_ID_SECTORS] = drive->sect;
}
static void ide_disk_init_chs(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
/* Extract geometry if we did not already have one for the drive */
if (!drive->cyl || !drive->head || !drive->sect) {
- drive->cyl = drive->bios_cyl = id->cyls;
- drive->head = drive->bios_head = id->heads;
- drive->sect = drive->bios_sect = id->sectors;
+ drive->cyl = drive->bios_cyl = id[ATA_ID_CYLS];
+ drive->head = drive->bios_head = id[ATA_ID_HEADS];
+ drive->sect = drive->bios_sect = id[ATA_ID_SECTORS];
}
/* Handle logical geometry translation by the drive */
- if ((id->field_valid & 1) && id->cur_cyls &&
- id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) {
- drive->cyl = id->cur_cyls;
- drive->head = id->cur_heads;
- drive->sect = id->cur_sectors;
+ if (ata_id_current_chs_valid(id)) {
+ drive->cyl = id[ATA_ID_CUR_CYLS];
+ drive->head = id[ATA_ID_CUR_HEADS];
+ drive->sect = id[ATA_ID_CUR_SECTORS];
}
/* Use physical geometry if what we have still makes no sense */
- if (drive->head > 16 && id->heads && id->heads <= 16) {
- drive->cyl = id->cyls;
- drive->head = id->heads;
- drive->sect = id->sectors;
+ if (drive->head > 16 && id[ATA_ID_HEADS] && id[ATA_ID_HEADS] <= 16) {
+ drive->cyl = id[ATA_ID_CYLS];
+ drive->head = id[ATA_ID_HEADS];
+ drive->sect = id[ATA_ID_SECTORS];
}
}
static void ide_disk_init_mult_count(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
-
- drive->mult_count = 0;
- if (id->max_multsect) {
-#ifdef CONFIG_IDEDISK_MULTI_MODE
- id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0;
- id->multsect_valid = id->multsect ? 1 : 0;
- drive->mult_req = id->multsect_valid ? id->max_multsect : 0;
- drive->special.b.set_multmode = drive->mult_req ? 1 : 0;
-#else /* original, pre IDE-NFG, per request of AC */
- drive->mult_req = 0;
- if (drive->mult_req > id->max_multsect)
- drive->mult_req = id->max_multsect;
- if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect))
+ u16 *id = drive->id;
+ u8 max_multsect = id[ATA_ID_MAX_MULTSECT] & 0xff;
+
+ if (max_multsect) {
+ if ((max_multsect / 2) > 1)
+ id[ATA_ID_MULTSECT] = max_multsect | 0x100;
+ else
+ id[ATA_ID_MULTSECT] &= ~0x1ff;
+
+ drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
+
+ if (drive->mult_req)
drive->special.b.set_multmode = 1;
-#endif
}
}
static inline void do_identify (ide_drive_t *drive, u8 cmd)
{
ide_hwif_t *hwif = HWIF(drive);
- int bswap = 1;
- struct hd_driveid *id;
+ u16 *id = drive->id;
+ char *m = (char *)&id[ATA_ID_PROD];
+ int bswap = 1, is_cfa;
- id = drive->id;
/* read 512 bytes of id info */
hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
ide_fix_driveid(id);
/*
- * WIN_IDENTIFY returns little-endian info,
- * WIN_PIDENTIFY *usually* returns little-endian info.
+ * ATA_CMD_ID_ATA returns little-endian info,
+ * ATA_CMD_ID_ATAPI *usually* returns little-endian info.
*/
- if (cmd == WIN_PIDENTIFY) {
- if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */
- || (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */
- || (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */
+ if (cmd == ATA_CMD_ID_ATAPI) {
+ if ((m[0] == 'N' && m[1] == 'E') || /* NEC */
+ (m[0] == 'F' && m[1] == 'X') || /* Mitsumi */
+ (m[0] == 'P' && m[1] == 'i')) /* Pioneer */
/* Vertos drives may still be weird */
- bswap ^= 1;
+ bswap ^= 1;
}
- ide_fixstring(id->model, sizeof(id->model), bswap);
- ide_fixstring(id->fw_rev, sizeof(id->fw_rev), bswap);
- ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
+
+ ide_fixstring(m, ATA_ID_PROD_LEN, bswap);
+ ide_fixstring((char *)&id[ATA_ID_FW_REV], ATA_ID_FW_REV_LEN, bswap);
+ ide_fixstring((char *)&id[ATA_ID_SERNO], ATA_ID_SERNO_LEN, bswap);
/* we depend on this a lot! */
- id->model[sizeof(id->model)-1] = '\0';
+ m[ATA_ID_PROD_LEN - 1] = '\0';
- if (strstr(id->model, "E X A B Y T E N E S T"))
+ if (strstr(m, "E X A B Y T E N E S T"))
goto err_misc;
- printk(KERN_INFO "%s: %s, ", drive->name, id->model);
+ printk(KERN_INFO "%s: %s, ", drive->name, m);
drive->present = 1;
drive->dead = 0;
/*
* Check for an ATAPI device
*/
- if (cmd == WIN_PIDENTIFY) {
- u8 type = (id->config >> 8) & 0x1f;
+ if (cmd == ATA_CMD_ID_ATAPI) {
+ u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
printk(KERN_CONT "ATAPI ");
switch (type) {
case ide_floppy:
- if (!strstr(id->model, "CD-ROM")) {
- if (!strstr(id->model, "oppy") &&
- !strstr(id->model, "poyp") &&
- !strstr(id->model, "ZIP"))
+ if (!strstr(m, "CD-ROM")) {
+ if (!strstr(m, "oppy") &&
+ !strstr(m, "poyp") &&
+ !strstr(m, "ZIP"))
printk(KERN_CONT "cdrom or floppy?, assuming ");
if (drive->media != ide_cdrom) {
printk(KERN_CONT "FLOPPY");
drive->removable = 1;
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
- if (!strstr(id->model, "CD-ROM") &&
- strstr(id->model, "ZIP")) {
+ if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
printk(KERN_CONT "FLOPPY");
type = ide_floppy;
break;
* Not an ATAPI device: looks like a "regular" hard disk
*/
- /*
- * 0x848a = CompactFlash device
- * These are *not* removable in Linux definition of the term
- */
+ is_cfa = ata_id_is_cfa(id);
- if ((id->config != 0x848a) && (id->config & (1<<7)))
+ /* CF devices are *not* removable in Linux definition of the term */
+ if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
drive->removable = 1;
drive->media = ide_disk;
- printk(KERN_CONT "%s DISK drive\n",
- (id->config == 0x848a) ? "CFA" : "ATA");
+ printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA");
return;
if (io_ports->ctl_addr) {
a = tp_ops->read_altstatus(hwif);
s = tp_ops->read_status(hwif);
- if ((a ^ s) & ~INDEX_STAT)
+ if ((a ^ s) & ~ATA_IDX)
/* ancient Seagate drives, broken interfaces */
printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
"instead of ALTSTATUS(0x%02x)\n",
/* set features register for atapi
* identify command to be sure of reply
*/
- if (cmd == WIN_PIDENTIFY) {
+ if (cmd == ATA_CMD_ID_ATAPI) {
ide_task_t task;
memset(&task, 0, sizeof(task));
/* ask drive for ID */
tp_ops->exec_command(hwif, cmd);
- timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
- timeout += jiffies;
- do {
- if (time_after(jiffies, timeout)) {
- /* drive timed-out */
- return 1;
- }
- /* give drive a breather */
- msleep(50);
- s = use_altstatus ? tp_ops->read_altstatus(hwif)
- : tp_ops->read_status(hwif);
- } while (s & BUSY_STAT);
+ timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
+
+ if (ide_busy_sleep(hwif, timeout, use_altstatus))
+ return 1;
- /* wait for IRQ and DRQ_STAT */
+ /* wait for IRQ and ATA_DRQ */
msleep(50);
s = tp_ops->read_status(hwif);
- if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
+ if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
unsigned long flags;
/* local CPU only; some systems need this */
return retval;
}
-static int ide_busy_sleep(ide_hwif_t *hwif)
+int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
{
- unsigned long timeout = jiffies + WAIT_WORSTCASE;
u8 stat;
+ timeout += jiffies;
+
do {
- msleep(50);
- stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0)
+ msleep(50); /* give drive a breather */
+ stat = altstatus ? hwif->tp_ops->read_altstatus(hwif)
+ : hwif->tp_ops->read_status(hwif);
+ if ((stat & ATA_BUSY) == 0)
return 0;
} while (time_before(jiffies, timeout));
- return 1;
+ return 1; /* drive timed-out */
}
static u8 ide_read_device(ide_drive_t *drive)
if (drive->present) {
/* avoid waiting for inappropriate probes */
- if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY))
+ if (drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
return 4;
}
#ifdef DEBUG
printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
drive->name, drive->present, drive->media,
- (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
+ (cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI");
#endif
/* needed for some systems
if (drive->select.b.unit != 0) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
- /* allow BUSY_STAT to assert & clear */
+ /* allow ATA_BUSY to assert & clear */
msleep(50);
}
/* no i/f present: mmm.. this should be a 4 -ml */
stat = tp_ops->read_status(hwif);
- if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
- drive->present || cmd == WIN_PIDENTIFY) {
+ if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
+ drive->present || cmd == ATA_CMD_ID_ATAPI) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
/* failed: try again */
stat = tp_ops->read_status(hwif);
- if (stat == (BUSY_STAT | READY_STAT))
+ if (stat == (ATA_BUSY | ATA_DRDY))
return 4;
- if (rc == 1 && cmd == WIN_PIDENTIFY) {
+ if (rc == 1 && cmd == ATA_CMD_ID_ATAPI) {
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
SELECT_DRIVE(drive);
msleep(50);
- tp_ops->exec_command(hwif, WIN_SRST);
- (void)ide_busy_sleep(hwif);
+ tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
+ (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
rc = try_to_identify(drive, cmd);
}
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
u8 stat;
- printk(KERN_INFO "%s: enabling %s -- ", hwif->name, drive->id->model);
+ printk(KERN_INFO "%s: enabling %s -- ",
+ hwif->name, (char *)&drive->id[ATA_ID_PROD]);
SELECT_DRIVE(drive);
msleep(50);
- tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST);
+ tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST);
- if (ide_busy_sleep(hwif)) {
+ if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 0)) {
printk(KERN_CONT "failed (timeout)\n");
return;
}
printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
else
printk(KERN_CONT "success\n");
-
- /* if !(success||timed-out) */
- if (do_probe(drive, WIN_IDENTIFY) >= 2) {
- /* look for ATAPI device */
- (void) do_probe(drive, WIN_PIDENTIFY);
- }
}
/**
static inline u8 probe_for_drive (ide_drive_t *drive)
{
+ char *m;
+
/*
* In order to keep things simple we have an id
* block for all drives at all times. If the device
* Also note that 0 everywhere means "can't do X"
*/
- drive->id = kzalloc(SECTOR_WORDS *4, GFP_KERNEL);
+ drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
drive->id_read = 0;
if(drive->id == NULL)
{
printk(KERN_ERR "ide: out of memory for id data.\n");
return 0;
}
- strcpy(drive->id->model, "UNKNOWN");
-
+
+ m = (char *)&drive->id[ATA_ID_PROD];
+ strcpy(m, "UNKNOWN");
+
/* skip probing? */
- if (!drive->noprobe)
- {
+ if (!drive->noprobe) {
+retry:
/* if !(success||timed-out) */
- if (do_probe(drive, WIN_IDENTIFY) >= 2) {
+ if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
/* look for ATAPI device */
- (void) do_probe(drive, WIN_PIDENTIFY);
- }
+ (void)do_probe(drive, ATA_CMD_ID_ATAPI);
+
if (!drive->present)
/* drive not found */
return 0;
- if (strstr(drive->id->model, "E X A B Y T E N E S T"))
+
+ if (strstr(m, "E X A B Y T E N E S T")) {
enable_nest(drive);
-
+ goto retry;
+ }
+
/* identification failed? */
if (!drive->id_read) {
if (drive->media == ide_disk) {
/**
* ide_undecoded_slave - look for bad CF adapters
- * @drive1: drive
+ * @dev1: slave device
*
* Analyse the drives on the interface and attempt to decide if we
* have the same drive viewed twice. This occurs with crap CF adapters
* and PCMCIA sometimes.
*/
-void ide_undecoded_slave(ide_drive_t *drive1)
+void ide_undecoded_slave(ide_drive_t *dev1)
{
- ide_drive_t *drive0 = &drive1->hwif->drives[0];
+ ide_drive_t *dev0 = &dev1->hwif->drives[0];
- if ((drive1->dn & 1) == 0 || drive0->present == 0)
+ if ((dev1->dn & 1) == 0 || dev0->present == 0)
return;
/* If the models don't match they are not the same product */
- if (strcmp(drive0->id->model, drive1->id->model))
+ if (strcmp((char *)&dev0->id[ATA_ID_PROD],
+ (char *)&dev1->id[ATA_ID_PROD]))
return;
/* Serial numbers do not match */
- if (strncmp(drive0->id->serial_no, drive1->id->serial_no, 20))
+ if (strncmp((char *)&dev0->id[ATA_ID_SERNO],
+ (char *)&dev1->id[ATA_ID_SERNO], ATA_ID_SERNO_LEN))
return;
/* No serial number, thankfully very rare for CF */
- if (drive0->id->serial_no[0] == 0)
+ if (*(char *)&dev0->id[ATA_ID_SERNO] == 0)
return;
/* Appears to be an IDE flash adapter with decode bugs */
printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");
- drive1->present = 0;
+ dev1->present = 0;
}
EXPORT_SYMBOL_GPL(ide_undecoded_slave);
if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
drive->no_io_32bit = 1;
else
- drive->no_io_32bit = drive->id->dword_io ? 1 : 0;
+ drive->no_io_32bit = drive->id[ATA_ID_DWORD_IO] ? 1 : 0;
}
}
-#if MAX_HWIFS > 1
/*
* save_match() is used to simplify logic in init_irq() below.
*
if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
*match = new;
}
-#endif /* MAX_HWIFS > 1 */
/*
* init request queue
ide_hwgroup_t *hwgroup;
ide_hwif_t *match = NULL;
-
- BUG_ON(in_interrupt());
- BUG_ON(irqs_disabled());
- BUG_ON(hwif == NULL);
-
mutex_lock(&ide_cfg_mtx);
hwif->hwgroup = NULL;
-#if MAX_HWIFS > 1
+
/*
* Group up with any other hwifs that share our irq(s).
*/
}
}
}
-#endif /* MAX_HWIFS > 1 */
+
/*
* If we are still without a hwgroup, then form a new one
*/
sa = IRQF_SHARED;
#endif /* __mc68000__ */
- if (IDE_CHIPSET_IS_PCI(hwif->chipset))
+ if (hwif->chipset == ide_pci || hwif->chipset == ide_cmd646 ||
+ hwif->chipset == ide_ali14xx)
sa = IRQF_SHARED;
if (io_ports->ctl_addr)
{
struct gendisk *p = data;
*part &= (1 << PARTN_BITS) - 1;
- return &p->dev.kobj;
+ return &disk_to_dev(p)->kobj;
}
static int exact_lock(dev_t dev, void *data)
if (!drive->present)
continue;
- ide_add_generic_settings(drive);
-
snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
dev->parent = &hwif->gendev;
dev->bus = &ide_bus_type;
static int ide_sysfs_register_port(ide_hwif_t *hwif)
{
- int i, rc;
+ int i, uninitialized_var(rc);
for (i = 0; ide_port_attrs[i]; i++) {
rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
* ports 0x1f0/0x170 (the ide0/ide1 defaults).
*/
mutex_lock(&ide_cfg_mtx);
- if (MAX_HWIFS == 1) {
- if (ide_indexes == 0 && i == 0)
- idx = 1;
+ if (bootable) {
+ if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
+ idx = ffz(ide_indexes | i);
} else {
- if (bootable) {
- if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | i);
- } else {
- if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | 3);
- else if ((ide_indexes & 3) != 3)
- idx = ffz(ide_indexes);
- }
+ if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
+ idx = ffz(ide_indexes | 3);
+ else if ((ide_indexes & 3) != 3)
+ idx = ffz(ide_indexes);
}
if (idx >= 0)
ide_indexes |= (1 << idx);
if (hws[0])
host->dev[0] = hws[0]->dev;
- if (d)
+ if (d) {
+ host->init_chipset = d->init_chipset;
host->host_flags = d->host_flags;
+ }
return host;
}
projects / linux-2.6-omap-h63xx.git / blobdiff