#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/bitops.h>
#include <linux/nmi.h>
tf_outb(tf->lbah, io_ports->lbah_addr);
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tf_outb((tf->device & HIHI) | drive->select.all,
+ tf_outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}
EXPORT_SYMBOL_GPL(ide_tf_load);
void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
{
- u8 *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */
+ u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */
if (byteswap) {
/* convert from big-endian to host byte order */
- for (p = end ; p != s;)
- be16_to_cpus((u16 *)(p -= 2));
+ for (p = s ; p != end ; p += 2)
+ be16_to_cpus((u16 *) p);
}
+
/* strip leading blanks */
+ p = s;
while (s != end && *s == ' ')
++s;
/* compress internal blanks and strip trailing blanks */
printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
drive->name);
- if (ide_dev_is_sata(id) && !ivb)
+ if (ata_id_is_sata(id) && !ivb)
return 1;
if (hwif->cbl != ATA_CBL_PATA80 && !ivb)
return 1;
no_80w:
- if (drive->udma33_warned == 1)
+ if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;
printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
drive->name,
hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");
- drive->udma33_warned = 1;
+ drive->dev_flags |= IDE_DFLAG_UDMA33_WARNED;
return 0;
}
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
u16 *id;
- unsigned long timeout, flags;
+ unsigned long flags;
u8 stat;
/*
tp_ops->set_irq(hwif, 0);
msleep(50);
tp_ops->exec_command(hwif, ATA_CMD_ID_ATA);
- timeout = jiffies + WAIT_WORSTCASE;
- do {
- if (time_after(jiffies, timeout)) {
- SELECT_MASK(drive, 0);
- return 0; /* drive timed-out */
- }
- msleep(50); /* give drive a breather */
- stat = tp_ops->read_altstatus(hwif);
- } while (stat & ATA_BUSY);
+ if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 1)) {
+ SELECT_MASK(drive, 0);
+ return 0;
+ }
msleep(50); /* wait for IRQ and ATA_DRQ */
stat = tp_ops->read_status(hwif);
}
local_irq_save(flags);
SELECT_MASK(drive, 0);
- id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
+ id = kmalloc(SECTOR_SIZE, GFP_ATOMIC);
if (!id) {
local_irq_restore(flags);
return 0;
kfree(id);
- if (drive->using_dma && ide_id_dma_bug(drive))
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
ide_dma_off(drive);
return 1;
udelay(1);
SELECT_DRIVE(drive);
- SELECT_MASK(drive, 0);
+ SELECT_MASK(drive, 1);
udelay(1);
tp_ops->set_irq(hwif, 0);
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
- if (speed >= XFER_SW_DMA_0 && drive->using_dma)
+ if (speed >= XFER_SW_DMA_0 && (drive->dev_flags & IDE_DFLAG_USING_DMA))
hwif->dma_ops->dma_host_set(drive, 1);
else if (hwif->dma_ops) /* check if host supports DMA */
ide_dma_off_quietly(drive);
return ide_stopped;
}
+static void ide_reset_report_error(ide_hwif_t *hwif, u8 err)
+{
+ static const char *err_master_vals[] =
+ { NULL, "passed", "formatter device error",
+ "sector buffer error", "ECC circuitry error",
+ "controlling MPU error" };
+
+ u8 err_master = err & 0x7f;
+
+ printk(KERN_ERR "%s: reset: master: ", hwif->name);
+ if (err_master && err_master < 6)
+ printk(KERN_CONT "%s", err_master_vals[err_master]);
+ else
+ printk(KERN_CONT "error (0x%02x?)", err);
+ if (err & 0x80)
+ printk(KERN_CONT "; slave: failed");
+ printk(KERN_CONT "\n");
+}
+
/*
* reset_pollfunc() gets invoked to poll the interface for completion every 50ms
* during an ide reset operation. If the drives have not yet responded,
drive->failures++;
err = -EIO;
} else {
- printk("%s: reset: ", hwif->name);
tmp = ide_read_error(drive);
if (tmp == 1) {
- printk("success\n");
+ printk(KERN_INFO "%s: reset: success\n", hwif->name);
drive->failures = 0;
} else {
+ ide_reset_report_error(hwif, tmp);
drive->failures++;
- printk("master: ");
- switch (tmp & 0x7f) {
- case 1: printk("passed");
- break;
- case 2: printk("formatter device error");
- break;
- case 3: printk("sector buffer error");
- break;
- case 4: printk("ECC circuitry error");
- break;
- case 5: printk("controlling MPU error");
- break;
- default:printk("error (0x%02x?)", tmp);
- }
- if (tmp & 0x80)
- printk("; slave: failed");
- printk("\n");
err = -EIO;
}
}
drive->special.all = 0;
drive->special.b.set_geometry = legacy;
drive->special.b.recalibrate = legacy;
+
drive->mult_count = 0;
- if (!drive->keep_settings && !drive->using_dma)
+ drive->dev_flags &= ~IDE_DFLAG_PARKED;
+
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
drive->mult_req = 0;
+
if (drive->mult_req != drive->mult_count)
drive->special.b.set_multmode = 1;
}
if (drive->media == ide_disk)
ide_disk_pre_reset(drive);
else
- drive->post_reset = 1;
+ drive->dev_flags |= IDE_DFLAG_POST_RESET;
- if (drive->using_dma) {
+ if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}
- if (!drive->keep_settings) {
- if (!drive->using_dma) {
- drive->unmask = 0;
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
drive->io_32bit = 0;
}
return;
static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
{
unsigned int unit;
- unsigned long flags;
+ unsigned long flags, timeout;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
struct ide_io_ports *io_ports;
const struct ide_tp_ops *tp_ops;
const struct ide_port_ops *port_ops;
+ DEFINE_WAIT(wait);
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
return ide_started;
}
+ /* We must not disturb devices in the IDE_DFLAG_PARKED state. */
+ do {
+ unsigned long now;
+
+ prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
+ timeout = jiffies;
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *tdrive = &hwif->drives[unit];
+
+ if (tdrive->dev_flags & IDE_DFLAG_PRESENT &&
+ tdrive->dev_flags & IDE_DFLAG_PARKED &&
+ time_after(tdrive->sleep, timeout))
+ timeout = tdrive->sleep;
+ }
+
+ now = jiffies;
+ if (time_before_eq(timeout, now))
+ break;
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+ timeout = schedule_timeout_uninterruptible(timeout - now);
+ spin_lock_irqsave(&ide_lock, flags);
+ } while (timeout);
+ finish_wait(&ide_park_wq, &wait);
+
/*
* First, reset any device state data we were maintaining
* for any of the drives on this interface.
projects / linux-2.6-omap-h63xx.git / blobdiff