* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
- if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
- drive->state = 0;
+ if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
+ drive->retry_pio <= 3) {
+ drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
ide_dma_on(drive);
}
}
EXPORT_SYMBOL(ide_end_request);
-/*
- * Power Management state machine. This one is rather trivial for now,
- * we should probably add more, like switching back to PIO on suspend
- * to help some BIOSes, re-do the door locking on resume, etc...
- */
-
-enum {
- ide_pm_flush_cache = ide_pm_state_start_suspend,
- idedisk_pm_standby,
-
- idedisk_pm_restore_pio = ide_pm_state_start_resume,
- idedisk_pm_idle,
- ide_pm_restore_dma,
-};
-
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
struct request_pm_state *pm = rq->data;
return;
switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = IDE_PM_COMPLETED;
else
- pm->pm_step = idedisk_pm_standby;
+ pm->pm_step = IDE_PM_STANDBY;
break;
- case idedisk_pm_standby: /* Suspend step 2 (standby) complete */
- pm->pm_step = ide_pm_state_completed;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ pm->pm_step = IDE_PM_COMPLETED;
break;
- case idedisk_pm_restore_pio: /* Resume step 1 complete */
- pm->pm_step = idedisk_pm_idle;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ pm->pm_step = IDE_PM_IDLE;
break;
- case idedisk_pm_idle: /* Resume step 2 (idle) complete */
- pm->pm_step = ide_pm_restore_dma;
+ case IDE_PM_IDLE: /* Resume step 2 (idle)*/
+ pm->pm_step = IDE_PM_RESTORE_DMA;
break;
}
}
memset(args, 0, sizeof(*args));
switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (drive->media != ide_disk)
break;
/* Not supported? Switch to next step now. */
- if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) {
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
}
else
args->tf.command = ATA_CMD_FLUSH;
goto out_do_tf;
-
- case idedisk_pm_standby: /* Suspend step 2 (standby) */
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
args->tf.command = ATA_CMD_STANDBYNOW1;
goto out_do_tf;
-
- case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
ide_set_max_pio(drive);
/*
- * skip idedisk_pm_idle for ATAPI devices
+ * skip IDE_PM_IDLE for ATAPI devices
*/
if (drive->media != ide_disk)
- pm->pm_step = ide_pm_restore_dma;
+ pm->pm_step = IDE_PM_RESTORE_DMA;
else
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
-
- case idedisk_pm_idle: /* Resume step 2 (idle) */
+ case IDE_PM_IDLE: /* Resume step 2 (idle) */
args->tf.command = ATA_CMD_IDLEIMMEDIATE;
goto out_do_tf;
-
- case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */
+ case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
/*
* Right now, all we do is call ide_set_dma(drive),
* we could be smarter and check for current xfer_speed
if (drive->hwif->dma_ops == NULL)
break;
/*
- * TODO: respect ->using_dma setting
+ * TODO: respect IDE_DFLAG_USING_DMA
*/
ide_set_dma(drive);
break;
}
- pm->pm_step = ide_pm_state_completed;
+
+ pm->pm_step = IDE_PM_COMPLETED;
return ide_stopped;
out_do_tf:
if (blk_pm_suspend_request(rq)) {
blk_stop_queue(drive->queue);
} else {
- drive->blocked = 0;
+ drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
blk_start_queue(drive->queue);
}
HWGROUP(drive)->rq = NULL;
drive->name, rq->pm->pm_step, stat, err);
#endif
ide_complete_power_step(drive, rq, stat, err);
- if (pm->pm_step == ide_pm_state_completed)
+ if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
}
{
ide_hwif_t *hwif = drive->hwif;
- if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
- if (drive->select.b.lba &&
+ if ((drive->dev_flags & IDE_DFLAG_LBA) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
{
ide_hwif_t *hwif = drive->hwif;
- if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
tf->lbal = drive->sect;
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
- tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
+ tf->device = (drive->head - 1) | drive->select;
tf->command = ATA_CMD_INIT_DEV_PARAMS;
}
return ide_started;
}
-/*
- * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
- */
-static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
-{
- switch (req_pio) {
- case 202:
- case 201:
- case 200:
- case 102:
- case 101:
- case 100:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
- case 9:
- case 8:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
- case 7:
- case 6:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
- default:
- return 0;
- }
-}
-
/**
* do_special - issue some special commands
* @drive: drive the command is for
#ifdef DEBUG
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
- if (s->b.set_tune) {
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 req_pio = drive->tune_req;
-
- s->b.set_tune = 0;
-
- if (set_pio_mode_abuse(drive->hwif, req_pio)) {
- /*
- * take ide_lock for drive->[no_]unmask/[no_]io_32bit
- */
- if (req_pio == 8 || req_pio == 9) {
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- port_ops->set_pio_mode(drive, req_pio);
- spin_unlock_irqrestore(&ide_lock, flags);
- } else
- port_ops->set_pio_mode(drive, req_pio);
- } else {
- int keep_dma = drive->using_dma;
-
- ide_set_pio(drive, req_pio);
-
- if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
- if (keep_dma)
- ide_dma_on(drive);
- }
- }
-
- return ide_stopped;
- } else {
- if (drive->media == ide_disk)
- return ide_disk_special(drive);
+ if (drive->media == ide_disk)
+ return ide_disk_special(drive);
- s->all = 0;
- drive->mult_req = 0;
- return ide_stopped;
- }
+ s->all = 0;
+ drive->mult_req = 0;
+ return ide_stopped;
}
void ide_map_sg(ide_drive_t *drive, struct request *rq)
struct request_pm_state *pm = rq->data;
if (blk_pm_suspend_request(rq) &&
- pm->pm_step == ide_pm_state_start_suspend)
+ pm->pm_step == IDE_PM_START_SUSPEND)
/* Mark drive blocked when starting the suspend sequence. */
- drive->blocked = 1;
+ drive->dev_flags |= IDE_DFLAG_BLOCKED;
else if (blk_pm_resume_request(rq) &&
- pm->pm_step == ide_pm_state_start_resume) {
+ pm->pm_step == IDE_PM_START_RESUME) {
/*
* The first thing we do on wakeup is to wait for BSY bit to
* go away (with a looong timeout) as a drive on this hwif may
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
- pm->pm_step == ide_pm_state_completed)
+ pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return startstop;
} else if (!rq->rq_disk && blk_special_request(rq))
if (timeout > WAIT_WORSTCASE)
timeout = WAIT_WORSTCASE;
drive->sleep = timeout + jiffies;
- drive->sleeping = 1;
+ drive->dev_flags |= IDE_DFLAG_SLEEPING;
}
EXPORT_SYMBOL(ide_stall_queue);
}
do {
- if ((!drive->sleeping || time_after_eq(jiffies, drive->sleep))
- && !elv_queue_empty(drive->queue)) {
- if (!best
- || (drive->sleeping && (!best->sleeping || time_before(drive->sleep, best->sleep)))
- || (!best->sleeping && time_before(WAKEUP(drive), WAKEUP(best))))
- {
+ u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
+ u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
+
+ if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
+ !elv_queue_empty(drive->queue)) {
+ if (best == NULL ||
+ (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
+ (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
if (!blk_queue_plugged(drive->queue))
best = drive;
}
}
} while ((drive = drive->next) != hwgroup->drive);
- if (best && best->nice1 && !best->sleeping && best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
+
+ if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
+ (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
+ best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
long t = (signed long)(WAKEUP(best) - jiffies);
if (t >= WAIT_MIN_SLEEP) {
/*
*/
drive = best->next;
do {
- if (!drive->sleeping
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
&& time_before(jiffies - best->service_time, WAKEUP(drive))
&& time_before(WAKEUP(drive), jiffies + t))
{
hwgroup->rq = NULL;
drive = hwgroup->drive;
do {
- if (drive->sleeping && (!sleeping || time_before(drive->sleep, sleep))) {
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
+ (sleeping == 0 ||
+ time_before(drive->sleep, sleep))) {
sleeping = 1;
sleep = drive->sleep;
}
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
- drive->sleeping = 0;
+ drive->dev_flags &= ~IDE_DFLAG_SLEEPING;
drive->service_start = jiffies;
if (blk_queue_plugged(drive->queue)) {
* We count how many times we loop here to make sure we service
* all drives in the hwgroup without looping for ever
*/
- if (drive->blocked && !blk_pm_request(rq) && !(rq->cmd_flags & REQ_PREEMPT)) {
+ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+ blk_pm_request(rq) == 0 &&
+ (rq->cmd_flags & REQ_PREEMPT) == 0) {
drive = drive->next ? drive->next : hwgroup->drive;
if (loops++ < 4 && !blk_queue_plugged(drive->queue))
goto again;
* a timeout -- we'll reenable after we finish this next request
* (or rather the first chunk of it) in pio.
*/
+ drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
drive->retry_pio++;
- drive->state = DMA_PIO_RETRY;
ide_dma_off_quietly(drive);
/*
*/
hwif->ide_dma_clear_irq(drive);
- if (drive->unmask)
+ if (drive->dev_flags & IDE_DFLAG_UNMASK)
local_irq_enable_in_hardirq();
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
projects / linux-2.6-omap-h63xx.git / blobdiff