#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
+#include <linux/hdreg.h>
#include <linux/completion.h>
#include <linux/reboot.h>
#include <linux/cdrom.h>
* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
- if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
- drive->state = 0;
+ if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
+ drive->retry_pio <= 3) {
+ drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
ide_dma_on(drive);
}
}
EXPORT_SYMBOL(ide_end_request);
-/*
- * Power Management state machine. This one is rather trivial for now,
- * we should probably add more, like switching back to PIO on suspend
- * to help some BIOSes, re-do the door locking on resume, etc...
- */
-
-enum {
- ide_pm_flush_cache = ide_pm_state_start_suspend,
- idedisk_pm_standby,
-
- idedisk_pm_restore_pio = ide_pm_state_start_resume,
- idedisk_pm_idle,
- ide_pm_restore_dma,
-};
-
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
struct request_pm_state *pm = rq->data;
return;
switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = IDE_PM_COMPLETED;
else
- pm->pm_step = idedisk_pm_standby;
+ pm->pm_step = IDE_PM_STANDBY;
break;
- case idedisk_pm_standby: /* Suspend step 2 (standby) complete */
- pm->pm_step = ide_pm_state_completed;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ pm->pm_step = IDE_PM_COMPLETED;
break;
- case idedisk_pm_restore_pio: /* Resume step 1 complete */
- pm->pm_step = idedisk_pm_idle;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ pm->pm_step = IDE_PM_IDLE;
break;
- case idedisk_pm_idle: /* Resume step 2 (idle) complete */
- pm->pm_step = ide_pm_restore_dma;
+ case IDE_PM_IDLE: /* Resume step 2 (idle)*/
+ pm->pm_step = IDE_PM_RESTORE_DMA;
break;
}
}
memset(args, 0, sizeof(*args));
switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (drive->media != ide_disk)
break;
/* Not supported? Switch to next step now. */
- if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) {
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
}
- if (ide_id_has_flush_cache_ext(drive->id))
- args->tf.command = WIN_FLUSH_CACHE_EXT;
+ if (ata_id_flush_ext_enabled(drive->id))
+ args->tf.command = ATA_CMD_FLUSH_EXT;
else
- args->tf.command = WIN_FLUSH_CACHE;
+ args->tf.command = ATA_CMD_FLUSH;
goto out_do_tf;
-
- case idedisk_pm_standby: /* Suspend step 2 (standby) */
- args->tf.command = WIN_STANDBYNOW1;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ args->tf.command = ATA_CMD_STANDBYNOW1;
goto out_do_tf;
-
- case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
ide_set_max_pio(drive);
/*
- * skip idedisk_pm_idle for ATAPI devices
+ * skip IDE_PM_IDLE for ATAPI devices
*/
if (drive->media != ide_disk)
- pm->pm_step = ide_pm_restore_dma;
+ pm->pm_step = IDE_PM_RESTORE_DMA;
else
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
-
- case idedisk_pm_idle: /* Resume step 2 (idle) */
- args->tf.command = WIN_IDLEIMMEDIATE;
+ case IDE_PM_IDLE: /* Resume step 2 (idle) */
+ args->tf.command = ATA_CMD_IDLEIMMEDIATE;
goto out_do_tf;
-
- case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */
+ case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
/*
* Right now, all we do is call ide_set_dma(drive),
* we could be smarter and check for current xfer_speed
if (drive->hwif->dma_ops == NULL)
break;
/*
- * TODO: respect ->using_dma setting
+ * TODO: respect IDE_DFLAG_USING_DMA
*/
ide_set_dma(drive);
break;
}
- pm->pm_step = ide_pm_state_completed;
+
+ pm->pm_step = IDE_PM_COMPLETED;
return ide_stopped;
out_do_tf:
if (blk_pm_suspend_request(rq)) {
blk_stop_queue(drive->queue);
} else {
- drive->blocked = 0;
+ drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
blk_start_queue(drive->queue);
}
HWGROUP(drive)->rq = NULL;
ide_task_t *task = (ide_task_t *)rq->special;
if (rq->errors == 0)
- rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT);
+ rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
if (task) {
struct ide_taskfile *tf = &task->tf;
drive->name, rq->pm->pm_step, stat, err);
#endif
ide_complete_power_step(drive, rq, stat, err);
- if (pm->pm_step == ide_pm_state_completed)
+ if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
}
{
ide_hwif_t *hwif = drive->hwif;
- if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
- } else if (stat & ERR_STAT) {
+ } else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
- if (err == ABRT_ERR) {
- if (drive->select.b.lba &&
- /* some newer drives don't support WIN_SPECIFY */
- hwif->tp_ops->read_status(hwif) == WIN_SPECIFY)
+ if (err == ATA_ABORTED) {
+ if ((drive->dev_flags & IDE_DFLAG_LBA) &&
+ /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
+ hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
} else if ((err & BAD_CRC) == BAD_CRC) {
/* UDMA crc error, just retry the operation */
drive->crc_count++;
- } else if (err & (BBD_ERR | ECC_ERR)) {
+ } else if (err & (ATA_BBK | ATA_UNC)) {
/* retries won't help these */
rq->errors = ERROR_MAX;
- } else if (err & TRK0_ERR) {
+ } else if (err & ATA_TRK0NF) {
/* help it find track zero */
rq->errors |= ERROR_RECAL;
}
}
- if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ &&
+ if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
(hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
int nsect = drive->mult_count ? drive->mult_count : 1;
return ide_stopped;
}
- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
rq->errors |= ERROR_RESET;
if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
{
ide_hwif_t *hwif = drive->hwif;
- if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
/* add decoding error stuff */
}
- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
/* force an abort */
- hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE);
+ hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
tf->lbal = drive->sect;
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
- tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
- tf->command = WIN_SPECIFY;
+ tf->device = (drive->head - 1) | drive->select;
+ tf->command = ATA_CMD_INIT_DEV_PARAMS;
}
static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->sect;
- tf->command = WIN_RESTORE;
+ tf->command = ATA_CMD_RESTORE;
}
static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->mult_req;
- tf->command = WIN_SETMULT;
+ tf->command = ATA_CMD_SET_MULTI;
}
static ide_startstop_t ide_disk_special(ide_drive_t *drive)
ide_tf_set_restore_cmd(drive, &args.tf);
} else if (s->b.set_multmode) {
s->b.set_multmode = 0;
- if (drive->mult_req > drive->id->max_multsect)
- drive->mult_req = drive->id->max_multsect;
ide_tf_set_setmult_cmd(drive, &args.tf);
} else if (s->all) {
int special = s->all;
return ide_started;
}
-/*
- * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
- */
-static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
-{
- switch (req_pio) {
- case 202:
- case 201:
- case 200:
- case 102:
- case 101:
- case 100:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
- case 9:
- case 8:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
- case 7:
- case 6:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
- default:
- return 0;
- }
-}
-
/**
* do_special - issue some special commands
* @drive: drive the command is for
*
- * do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT
- * commands to a drive. It used to do much more, but has been scaled
- * back.
+ * do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
+ * ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
+ *
+ * It used to do much more, but has been scaled back.
*/
static ide_startstop_t do_special (ide_drive_t *drive)
#ifdef DEBUG
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
- if (s->b.set_tune) {
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 req_pio = drive->tune_req;
-
- s->b.set_tune = 0;
-
- if (set_pio_mode_abuse(drive->hwif, req_pio)) {
- /*
- * take ide_lock for drive->[no_]unmask/[no_]io_32bit
- */
- if (req_pio == 8 || req_pio == 9) {
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- port_ops->set_pio_mode(drive, req_pio);
- spin_unlock_irqrestore(&ide_lock, flags);
- } else
- port_ops->set_pio_mode(drive, req_pio);
- } else {
- int keep_dma = drive->using_dma;
-
- ide_set_pio(drive, req_pio);
-
- if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
- if (keep_dma)
- ide_dma_on(drive);
- }
- }
-
- return ide_stopped;
- } else {
- if (drive->media == ide_disk)
- return ide_disk_special(drive);
+ if (drive->media == ide_disk)
+ return ide_disk_special(drive);
- s->all = 0;
- drive->mult_req = 0;
- return ide_stopped;
- }
+ s->all = 0;
+ drive->mult_req = 0;
+ return ide_stopped;
}
void ide_map_sg(ide_drive_t *drive, struct request *rq)
return ide_stopped;
}
+int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
+ int arg)
+{
+ struct request_queue *q = drive->queue;
+ struct request *rq;
+ int ret = 0;
+
+ if (!(setting->flags & DS_SYNC))
+ return setting->set(drive, arg);
+
+ rq = blk_get_request(q, READ, GFP_KERNEL);
+ if (!rq)
+ return -ENOMEM;
+
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_len = 5;
+ rq->cmd[0] = REQ_DEVSET_EXEC;
+ *(int *)&rq->cmd[1] = arg;
+ rq->special = setting->set;
+
+ if (blk_execute_rq(q, NULL, rq, 0))
+ ret = rq->errors;
+ blk_put_request(rq);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ide_devset_execute);
+
static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
switch (rq->cmd[0]) {
+ case REQ_DEVSET_EXEC:
+ {
+ int err, (*setfunc)(ide_drive_t *, int) = rq->special;
+
+ err = setfunc(drive, *(int *)&rq->cmd[1]);
+ if (err)
+ rq->errors = err;
+ else
+ err = 1;
+ ide_end_request(drive, err, 0);
+ return ide_stopped;
+ }
case REQ_DRIVE_RESET:
return ide_do_reset(drive);
default:
struct request_pm_state *pm = rq->data;
if (blk_pm_suspend_request(rq) &&
- pm->pm_step == ide_pm_state_start_suspend)
+ pm->pm_step == IDE_PM_START_SUSPEND)
/* Mark drive blocked when starting the suspend sequence. */
- drive->blocked = 1;
+ drive->dev_flags |= IDE_DFLAG_BLOCKED;
else if (blk_pm_resume_request(rq) &&
- pm->pm_step == ide_pm_state_start_resume) {
+ pm->pm_step == IDE_PM_START_RESUME) {
/*
* The first thing we do on wakeup is to wait for BSY bit to
* go away (with a looong timeout) as a drive on this hwif may
* start_request - start of I/O and command issuing for IDE
*
* start_request() initiates handling of a new I/O request. It
- * accepts commands and I/O (read/write) requests. It also does
- * the final remapping for weird stuff like EZDrive. Once
- * device mapper can work sector level the EZDrive stuff can go away
+ * accepts commands and I/O (read/write) requests.
*
* FIXME: this function needs a rename
*/
static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
{
ide_startstop_t startstop;
- sector_t block;
BUG_ON(!blk_rq_started(rq));
goto kill_rq;
}
- block = rq->sector;
- if (blk_fs_request(rq) &&
- (drive->media == ide_disk || drive->media == ide_floppy)) {
- block += drive->sect0;
- }
- /* Yecch - this will shift the entire interval,
- possibly killing some innocent following sector */
- if (block == 0 && drive->remap_0_to_1 == 1)
- block = 1; /* redirect MBR access to EZ-Drive partn table */
-
if (blk_pm_request(rq))
ide_check_pm_state(drive, rq);
SELECT_DRIVE(drive);
- if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
+ if (ide_wait_stat(&startstop, drive, drive->ready_stat,
+ ATA_BUSY | ATA_DRQ, WAIT_READY)) {
printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
return startstop;
}
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
- pm->pm_step == ide_pm_state_completed)
+ pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return startstop;
} else if (!rq->rq_disk && blk_special_request(rq))
return ide_special_rq(drive, rq);
drv = *(ide_driver_t **)rq->rq_disk->private_data;
- return drv->do_request(drive, rq, block);
+
+ return drv->do_request(drive, rq, rq->sector);
}
return do_special(drive);
kill_rq:
if (timeout > WAIT_WORSTCASE)
timeout = WAIT_WORSTCASE;
drive->sleep = timeout + jiffies;
- drive->sleeping = 1;
+ drive->dev_flags |= IDE_DFLAG_SLEEPING;
}
EXPORT_SYMBOL(ide_stall_queue);
}
do {
- if ((!drive->sleeping || time_after_eq(jiffies, drive->sleep))
- && !elv_queue_empty(drive->queue)) {
- if (!best
- || (drive->sleeping && (!best->sleeping || time_before(drive->sleep, best->sleep)))
- || (!best->sleeping && time_before(WAKEUP(drive), WAKEUP(best))))
- {
+ u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
+ u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
+
+ if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
+ !elv_queue_empty(drive->queue)) {
+ if (best == NULL ||
+ (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
+ (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
if (!blk_queue_plugged(drive->queue))
best = drive;
}
}
} while ((drive = drive->next) != hwgroup->drive);
- if (best && best->nice1 && !best->sleeping && best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
+
+ if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
+ (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
+ best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
long t = (signed long)(WAKEUP(best) - jiffies);
if (t >= WAIT_MIN_SLEEP) {
/*
*/
drive = best->next;
do {
- if (!drive->sleeping
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
&& time_before(jiffies - best->service_time, WAKEUP(drive))
&& time_before(WAKEUP(drive), jiffies + t))
{
hwgroup->rq = NULL;
drive = hwgroup->drive;
do {
- if (drive->sleeping && (!sleeping || time_before(drive->sleep, sleep))) {
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
+ (sleeping == 0 ||
+ time_before(drive->sleep, sleep))) {
sleeping = 1;
sleep = drive->sleep;
}
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
- drive->sleeping = 0;
+ drive->dev_flags &= ~IDE_DFLAG_SLEEPING;
drive->service_start = jiffies;
if (blk_queue_plugged(drive->queue)) {
* We count how many times we loop here to make sure we service
* all drives in the hwgroup without looping for ever
*/
- if (drive->blocked && !blk_pm_request(rq) && !(rq->cmd_flags & REQ_PREEMPT)) {
+ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+ blk_pm_request(rq) == 0 &&
+ (rq->cmd_flags & REQ_PREEMPT) == 0) {
drive = drive->next ? drive->next : hwgroup->drive;
if (loops++ < 4 && !blk_queue_plugged(drive->queue))
goto again;
* a timeout -- we'll reenable after we finish this next request
* (or rather the first chunk of it) in pio.
*/
+ drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
drive->retry_pio++;
- drive->state = DMA_PIO_RETRY;
ide_dma_off_quietly(drive);
/*
if (hwif->irq == irq) {
stat = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(stat, READY_STAT, BAD_STAT)) {
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
/* Try to not flood the console with msgs */
static unsigned long last_msgtime, count;
++count;
del_timer(&hwgroup->timer);
spin_unlock(&ide_lock);
- /* Some controllers might set DMA INTR no matter DMA or PIO;
- * bmdma status might need to be cleared even for
- * PIO interrupts to prevent spurious/lost irq.
- */
- if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma))
- /* ide_dma_end() needs bmdma status for error checking.
- * So, skip clearing bmdma status here and leave it
- * to ide_dma_end() if this is dma interrupt.
- */
- hwif->ide_dma_clear_irq(drive);
+ if (hwif->port_ops && hwif->port_ops->clear_irq)
+ hwif->port_ops->clear_irq(drive);
- if (drive->unmask)
+ if (drive->dev_flags & IDE_DFLAG_UNMASK)
local_irq_enable_in_hardirq();
+
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&ide_lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
projects / linux-2.6-omap-h63xx.git / blobdiff