These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config TWL4030_MADC
+ tristate "TWL4030 MADC Driver"
+ depends on TWL4030_CORE
+ help
+ The TWL4030 Monitoring ADC driver enables the host
+ processor to monitor analog signals using analog-to-digital
+ conversions on the input source. TWL4030 MADC provides the
+ following features:
+ - Single 10-bit ADC with successive approximation register (SAR) conversion;
+ - Analog multiplexer for 16 inputs;
+ - Seven (of the 16) inputs are freely available;
+ - Battery voltage monitoring;
+ - Concurrent conversion request management;
+ - Interrupt signal to Primary Interrupt Handler;
+ - Averaging feature;
+ - Selective enable/disable of the averaging feature.
+
+ Say 'y' here to statically link this module into the kernel or 'm'
+ to build it as a dinamically loadable module. The module will be
+ called twl4030-madc.ko
+
+config TWL4030_PWRBUTTON
+ tristate "TWL4030 Power button Driver"
+ depends on TWL4030_CORE
+
+config TWL4030_POWEROFF
+ tristate "TWL4030 device poweroff"
+ depends on TWL4030_CORE
+
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called tsl2550.
-config MCU_MPC8349EMITX
- tristate "MPC8349E-mITX MCU driver"
- depends on I2C && PPC_83xx
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+config SENSORS_TSL2563
+ tristate "Taos TSL2563 ambient light sensor"
+ depends on I2C && HWMON
+ help
+ If you say yes here you get support for the Taos TSL2563
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called tsl2563.
+
+config LP5521
+ tristate "LP5521 LED driver chip"
+ depends on I2C
+ help
+ If you say yes here you get support for the National Semiconductor
+ LP5521 LED driver.
+
+config MENELAUS
+ bool "TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP24XX
help
- Say Y here to enable soft power-off functionality on the Freescale
- boards with the MPC8349E-mITX-compatible MCU chips. This driver will
- also register MCU GPIOs with the generic GPIO API, so you'll able
- to use MCU pins as GPIOs.
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card tranceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
endmenu