hwmon: (w83627hf) Drop reset module parameter

[linux-2.6-omap-h63xx.git] / drivers / hwmon / w83627hf.c

diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index ba8b069b1082bb61b44be33f0b7e5e5f10194c76..b30e5796cb26fcc646096571a994c5ee9b5cd7a8 100644 (file)
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
                 "Initialize the i2c address of the sensors");
 
-static int reset;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-
 static int init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -1600,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
        enum chips type = data->type;
        u8 tmp;
 
-       if (reset) {
-               /* Resetting the chip has been the default for a long time,
-                  but repeatedly caused problems (fans going to full
-                  speed...) so it is now optional. It might even go away if
-                  nobody reports it as being useful, as I see very little
-                  reason why this would be needed at all. */
-               dev_info(&pdev->dev, "If reset=1 solved a problem you were "
-                        "having, please report!\n");
-
-               /* save this register */
-               i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
-               /* Reset all except Watchdog values and last conversion values
-                  This sets fan-divs to 2, among others */
-               w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
-               /* Restore the register and disable power-on abnormal beep.
-                  This saves FAN 1/2/3 input/output values set by BIOS. */
-               w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
-               /* Disable master beep-enable (reset turns it on).
-                  Individual beeps should be reset to off but for some reason
-                  disabling this bit helps some people not get beeped */
-               w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
-       }
-
        /* Minimize conflicts with other winbond i2c-only clients...  */
        /* disable i2c subclients... how to disable main i2c client?? */
        /* force i2c address to relatively uncommon address */