hwmon-vid: Add support for AMD family 10h CPUs

[linux-2.6-omap-h63xx.git] / drivers / hwmon / hwmon-vid.c

diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 7b0a32c4dcfbacee11f6bce2b560afe620ff2790..bfc296145bba359572b5ed7f8b8fa7da23ec0773 100644 (file)
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -37,13 +37,21 @@
  * For VRD 10.0 and up, "VRD x.y Design Guide",
  * available at http://developer.intel.com/.
  *
- * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559,
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
  * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
  * Table 71. VID Code Voltages
- * AMD Opteron processors don't follow the Intel specifications.
- * I'm going to "make up" 2.4 as the spec number for the Opterons.
- * No good reason just a mnemonic for the 24x Opteron processor
- * series.
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
  *
  * The 17 specification is in fact Intel Mobile Voltage Positioning -
  * (IMVP-II). You can find more information in the datasheet of Max1718
@@ -95,7 +103,12 @@ int vid_from_reg(int val, u8 vrm)
                        return 0;
                return((1600000 - (val - 2) * 6250 + 500) / 1000);
 
-       case 24:                /* AMD NPT 0Fh (Athlon64 & Opteron) */
+       case 24:                /* Athlon64 & Opteron */
+               val &= 0x1f;
+               if (val == 0x1f)
+                       return 0;
+                               /* fall through */
+       case 25:                /* AMD NPT 0Fh */
                val &= 0x3f;
                return (val < 32) ? 1550 - 25 * val
                        : 775 - (25 * (val - 31)) / 2;
@@ -157,11 +170,17 @@ struct vrm_model {
 
 #ifdef CONFIG_X86
 
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
 
 static struct vrm_model vrm_models[] = {
        {X86_VENDOR_AMD, 0x6, ANY, ANY, 90},            /* Athlon Duron etc */
-       {X86_VENDOR_AMD, 0xF, ANY, ANY, 24},            /* Athlon 64, Opteron and above VRM 24 */
+       {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},           /* Athlon 64, Opteron */
+       {X86_VENDOR_AMD, 0xF, ANY, ANY, 25},            /* NPT family 0Fh */
+       {X86_VENDOR_AMD, 0x10, ANY, ANY, 25},           /* NPT family 10h */
        {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},          /* Pentium M (130 nm) */
        {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},          /* Tualatin */
        {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},          /* Pentium M (90 nm) */
@@ -189,6 +208,8 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
                if (vrm_models[i].vendor==vendor)
                        if ((vrm_models[i].eff_family==eff_family)
                         && ((vrm_models[i].eff_model==eff_model) ||
+                            (vrm_models[i].eff_model >= 0x10 &&
+                             eff_model <= vrm_models[i].eff_model) ||
                             (vrm_models[i].eff_model==ANY)) &&
                             (eff_stepping <= vrm_models[i].eff_stepping))
                                return vrm_models[i].vrm_type;