#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
struct adt7473_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct attribute_group attrs;
struct mutex lock;
u8 max_duty_at_overheat;
};
-static int adt7473_attach_adapter(struct i2c_adapter *adapter);
-static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind);
-static int adt7473_detach_client(struct i2c_client *client);
+static int adt7473_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int adt7473_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int adt7473_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7473_id[] = {
+ { "adt7473", adt7473 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7473_id);
static struct i2c_driver adt7473_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "adt7473",
},
- .attach_adapter = adt7473_attach_adapter,
- .detach_client = adt7473_detach_client,
+ .probe = adt7473_probe,
+ .remove = adt7473_remove,
+ .id_table = adt7473_id,
+ .detect = adt7473_detect,
+ .address_data = &addr_data,
};
/*
}
/*
- * On this chip, voltages are given as a count of steps between a minimum
- * and maximum voltage, not a direct voltage.
+ * Conversions
*/
-static const int volt_convert_table[][2] = {
- {2997, 3},
- {4395, 4},
+
+/* IN are scaled acording to built-in resistors */
+static const int adt7473_scaling[] = { /* .001 Volts */
+ 2250, 3300
};
+#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from))
static int decode_volt(int volt_index, u8 raw)
{
- int cmax = volt_convert_table[volt_index][0];
- int cmin = volt_convert_table[volt_index][1];
- return ((raw * (cmax - cmin)) / 255) + cmin;
+ return SCALE(raw, 192, adt7473_scaling[volt_index]);
}
static u8 encode_volt(int volt_index, int cooked)
{
- int cmax = volt_convert_table[volt_index][0];
- int cmin = volt_convert_table[volt_index][1];
- u8 x;
-
- if (cooked > cmax)
- cooked = cmax;
- else if (cooked < cmin)
- cooked = cmin;
-
- x = ((cooked - cmin) * 255) / (cmax - cmin);
-
- return x;
+ int raw = SCALE(cooked, adt7473_scaling[volt_index], 192);
+ return SENSORS_LIMIT(raw, 0, 255);
}
static ssize_t show_volt_min(struct device *dev,
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10);
- temp = temp && 0xFF;
mutex_lock(&data->lock);
- data->max_duty_at_overheat = temp;
+ data->max_duty_at_overheat = !!temp;
reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
if (temp)
reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
NULL
};
-static int adt7473_attach_adapter(struct i2c_adapter *adapter)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7473_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, adt7473_detect);
-}
-
-static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct adt7473_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- client = &data->client;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &adt7473_driver;
-
- i2c_set_clientdata(client, data);
-
- mutex_init(&data->lock);
+ return -ENODEV;
if (kind <= 0) {
int vendor, device, revision;
vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
- if (vendor != ADT7473_VENDOR) {
- err = -ENODEV;
- goto exit_free;
- }
+ if (vendor != ADT7473_VENDOR)
+ return -ENODEV;
device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
- if (device != ADT7473_DEVICE) {
- err = -ENODEV;
- goto exit_free;
- }
+ if (device != ADT7473_DEVICE)
+ return -ENODEV;
revision = i2c_smbus_read_byte_data(client,
ADT7473_REG_REVISION);
- if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) {
- err = -ENODEV;
- goto exit_free;
- }
+ if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
+ return -ENODEV;
} else
dev_dbg(&adapter->dev, "detection forced\n");
- strlcpy(client->name, "adt7473", I2C_NAME_SIZE);
+ strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
- err = i2c_attach_client(client);
- if (err)
- goto exit_free;
+ return 0;
+}
+
+static int adt7473_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adt7473_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->lock);
dev_info(&client->dev, "%s chip found\n", client->name);
data->attrs.attrs = adt7473_attr;
err = sysfs_create_group(&client->dev.kobj, &data->attrs);
if (err)
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
exit_remove:
sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int adt7473_detach_client(struct i2c_client *client)
+static int adt7473_remove(struct i2c_client *client)
{
struct adt7473_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
- i2c_detach_client(client);
kfree(data);
return 0;
}
projects / linux-2.6-omap-h63xx.git / blobdiff