Merge current mainline tree into linux-omap tree

[linux-2.6-omap-h63xx.git] / drivers / hwmon / Kconfig

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 00ff53348491be4f12b3174187aacbf8cb9291b7..390c6fa4efad6dddce3fecea5e898603876634f7 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3
          This driver can also be built as a module.  If so, the module
          will be called abituguru3.
 
+config SENSORS_AD7414
+       tristate "Analog Devices AD7414"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         AD7414 temperature monitoring chip.
+
+         This driver can also be built as a module. If so, the module
+         will be called ad7414.
+
 config SENSORS_AD7418
        tristate "Analog Devices AD7416, AD7417 and AD7418"
        depends on I2C && EXPERIMENTAL
@@ -67,6 +77,22 @@ config SENSORS_AD7418
          This driver can also be built as a module. If so, the module
          will be called ad7418.
 
+config SENSORS_ADCXX
+       tristate "National Semiconductor ADCxxxSxxx"
+       depends on SPI_MASTER && EXPERIMENTAL
+       help
+         If you say yes here you get support for the National Semiconductor
+         ADC<bb><c>S<sss> chip family, where
+         * bb  is the resolution in number of bits (8, 10, 12)
+         * c   is the number of channels (1, 2, 4, 8)
+         * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+           kSPS and 101 for 1 MSPS)
+
+         Examples : ADC081S101, ADC124S501, ...
+
+         This driver can also be built as a module.  If so, the module
+         will be called adcxx.
+
 config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"
        depends on I2C
@@ -124,7 +150,7 @@ config SENSORS_ADM1031
 
 config SENSORS_ADM9240
        tristate "Analog Devices ADM9240 and compatibles"
-       depends on I2C && EXPERIMENTAL
+       depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM9240,
@@ -394,13 +420,24 @@ config SENSORS_LM75
        tristate "National Semiconductor LM75 and compatibles"
        depends on I2C
        help
-         If you say yes here you get support for National Semiconductor LM75
-         sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-         9-bit precision mode), and TelCom (now Microchip) TCN75.
+         If you say yes here you get support for one common type of
+         temperature sensor chip, with models including:
+
+               - Dallas Semiconductor DS75 and DS1775
+               - Maxim MAX6625 and MAX6626
+               - Microchip MCP980x
+               - National Semiconductor LM75
+               - NXP's LM75A
+               - ST Microelectronics STDS75
+               - TelCom (now Microchip) TCN75
+               - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
 
-         The DS75 and DS1775 in 10- to 12-bit precision modes will require
-         a force module parameter. The driver will not handle the extra
-         precision anyhow.
+         This driver supports driver model based binding through board
+         specific I2C device tables.
+
+         It also supports the "legacy" style of driver binding.  To use
+         that with some chips which don't replicate LM75 quirks exactly,
+         you may need the "force" module parameter.
 
          This driver can also be built as a module.  If so, the module
          will be called lm75.
@@ -564,8 +601,8 @@ config SENSORS_DME1737
        select HWMON_VID
        help
          If you say yes here you get support for the hardware monitoring
-         and fan control features of the SMSC DME1737 (and compatibles
-         like the Asus A8000) and SCH311x Super-I/O chips.
+         and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+         Asus A8000 Super-I/O chips.
 
          This driver can also be built as a module.  If so, the module
          will be called dme1737.
@@ -799,6 +836,22 @@ config SENSORS_APPLESMC
          Say Y here if you have an applicable laptop and want to experience
          the awesome power of applesmc.
 
+config SENSORS_TSC210X
+       tristate "TI TSC210x battery & temperature sensors"
+       depends on HWMON && SPI_MASTER
+       select SPI_TSC210X
+       help
+         Say Y if your board has a TSC210x chip and you want to
+         have its battery state, auxiliary input and/or temperature
+         sensors exported through hwmon.
+
+         This driver can also be built as a module.  In this case
+         the module will be called tsc210x_sensors.
+
+config SENSORS_OMAP34XX
+       tristate "TI OMAP34xx internal temperature sensor"
+       depends on ARCH_OMAP3 && HIGH_RES_TIMERS
+
 config HWMON_DEBUG_CHIP
        bool "Hardware Monitoring Chip debugging messages"
        default n