agp: use dev_printk when possible

[linux-2.6-omap-h63xx.git] / drivers / char / agp / amd64-agp.c

diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 7345f9a9b7912cc3ec8a3a64e44a5b0182aadf5c..7495c522d8e477ac3aa0431c95fead255e7879ac 100644 (file)
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -294,12 +294,13 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
         * so let double check that order, and lets trust the AMD NB settings
         */
        if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
-               printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n",
-                                 32 << order);
+               dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
+                        32 << order);
                order = nb_order;
        }
 
-       printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
+       dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
+                aper, 32 << order);
        if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
                return -1;
 
@@ -320,10 +321,10 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
        for (i = 0; i < num_k8_northbridges; i++) {
                struct pci_dev *dev = k8_northbridges[i];
                if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
-                       printk(KERN_ERR PFX "No usable aperture found.\n");
+                       dev_err(&dev->dev, "no usable aperture found\n");
 #ifdef __x86_64__
                        /* should port this to i386 */
-                       printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n");
+                       dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
 #endif
                        return -1;
                }
@@ -346,14 +347,14 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
        default:   revstring="??"; break;
        }
 
-       printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
+       dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
 
        /*
         * Work around errata.
         * Chips before B2 stepping incorrectly reporting v3.5
         */
        if (pdev->revision < 0x13) {
-               printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
+               dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
                bridge->major_version = 3;
                bridge->minor_version = 0;
        }
@@ -376,11 +377,11 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
        struct pci_dev *dev1;
        int i;
        unsigned size = amd64_fetch_size();
-       printk(KERN_INFO "Setting up ULi AGP.\n");
+
+       dev_info(&pdev->dev, "setting up ULi AGP\n");
        dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
        if (dev1 == NULL) {
-               printk(KERN_INFO PFX "Detected a ULi chipset, "
-                       "but could not fine the secondary device.\n");
+               dev_info(&pdev->dev, "can't find ULi secondary device\n");
                return -ENODEV;
        }
 
@@ -389,7 +390,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
                        break;
 
        if (i == ARRAY_SIZE(uli_sizes)) {
-               printk(KERN_INFO PFX "No ULi size found for %d\n", size);
+               dev_info(&pdev->dev, "no ULi size found for %d\n", size);
                return -ENODEV;
        }
 
@@ -434,13 +435,11 @@ static int nforce3_agp_init(struct pci_dev *pdev)
        int i;
        unsigned size = amd64_fetch_size();
 
-       printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n");
+       dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
 
        dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
        if (dev1 == NULL) {
-               printk(KERN_INFO PFX "agpgart: Detected an NVIDIA "
-                       "nForce3 chipset, but could not find "
-                       "the secondary device.\n");
+               dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
                return -ENODEV;
        }
 
@@ -449,7 +448,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
                        break;
 
        if (i == ARRAY_SIZE(nforce3_sizes)) {
-               printk(KERN_INFO PFX "No NForce3 size found for %d\n", size);
+               dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
                return -ENODEV;
        }
 
@@ -463,7 +462,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 
        /* if x86-64 aperture base is beyond 4G, exit here */
        if ( (apbase & 0x7fff) >> (32 - 25) ) {
-               printk(KERN_INFO PFX "aperture base > 4G\n");
+               dev_info(&pdev->dev, "aperture base > 4G\n");
                return -ENODEV;
        }
 
@@ -506,7 +505,8 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
            pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
                amd8151_init(pdev, bridge);
        } else {
-               printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn);
+               dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
+                        pdev->vendor, pdev->device);
        }
 
        bridge->driver = &amd_8151_driver;