information. For framebuffer console users, please refer to
<file:Documentation/fb/fbcon.txt>.
+config DEVKMEM
+ bool "/dev/kmem virtual device support"
+ default y
+ help
+ Say Y here if you want to support the /dev/kmem device. The
+ /dev/kmem device is rarely used, but can be used for certain
+ kind of kernel debugging operations.
+ When in doubt, say "N".
+
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
depends on HAS_IOMEM
module will be called moxa.
config MOXA_SMARTIO
- tristate "Moxa SmartIO support (OBSOLETE)"
- depends on SERIAL_NONSTANDARD
- help
- Say Y here if you have a Moxa SmartIO multiport serial card.
-
- This driver can also be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called mxser. If you want to do that, say M
- here.
-
-config MOXA_SMARTIO_NEW
tristate "Moxa SmartIO support v. 2.0"
depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
changes finally resulting in PCI probing.
This driver can also be built as a module. The module will be called
- mxser_new. If you want to do that, say M here.
+ mxser. If you want to do that, say M here.
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
It's safe to say N here.
+config BFIN_OTP
+ tristate "Blackfin On-Chip OTP Memory Support"
+ depends on BLACKFIN && (BF52x || BF54x)
+ default y
+ help
+ If you say Y here, you will get support for a character device
+ interface into the One Time Programmable memory pages that are
+ stored on the Blackfin processor. This will not get you access
+ to the secure memory pages however. You will need to write your
+ own secure code and reader for that.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bfin-otp.
+
+ If unsure, it is safe to say Y.
+
+config BFIN_OTP_WRITE_ENABLE
+ bool "Enable writing support of OTP pages"
+ depends on BFIN_OTP
+ default n
+ help
+ If you say Y here, you will enable support for writing of the
+ OTP pages. This is dangerous by nature as you can only program
+ the pages once, so only enable this option when you actually
+ need it so as to not inadvertently clobber data.
+
+ If unsure, say N.
+
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
To compile this driver as a module, choose M here: the
module will be called nvram.
+#
+# These legacy RTC drivers just cause too many conflicts with the generic
+# RTC framework ... let's not even try to coexist any more.
+#
+if RTC_LIB=n
+
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
+ depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
+ && !ARM && !SUPERH && !S390 && !AVR32
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
will get access to the real time clock (or hardware clock) built
into your computer.
+endif # RTC_LIB
+
config COBALT_LCD
bool "Support for Cobalt LCD"
depends on MIPS_COBALT
To compile this driver as a module, choose M here: the
module will be called dtlk.
+config XILINX_HWICAP
+ tristate "Xilinx HWICAP Support"
+ depends on XILINX_VIRTEX
+ help
+ This option enables support for Xilinx Internal Configuration
+ Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex
+ FPGA platforms to partially reconfigure the FPGA at runtime.
+
+ If unsure, say N.
+
config R3964
tristate "Siemens R3964 line discipline"
---help---
Device which can be found in many (all ?) Sony Vaio laptops.
If you have one of those laptops, read
- <file:Documentation/sonypi.txt>, and say Y or M here.
+ <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
To compile this driver as a module, choose M here: the
module will be called sonypi.