which give you many serial ports. You would need something like this
to connect more than two modems to your Linux box, for instance in
order to become a dial-in server. If you have a card like that, say
- Y here and read <file:Documentation/computone.txt>.
+ Y here and read <file:Documentation/serial/computone.txt>.
To compile this driver as module, choose M here: the
module will be called ip2.
This driver supports Comtrol RocketPort and RocketModem PCI boards.
These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
modems. For information about the RocketPort/RocketModem boards
- and this driver read <file:Documentation/rocket.txt>.
+ and this driver read <file:Documentation/serial/rocket.txt>.
To compile this driver as a module, choose M here: the
module will be called rocket.
your Linux box, for instance in order to become a dial-in server.
For information about the Cyclades-Z card, read
- <file:Documentation/README.cycladesZ>.
+ <file:Documentation/serial/README.cycladesZ>.
To compile this driver as a module, choose M here: the
module will be called cyclades.
box, for instance in order to become a dial-in server. This driver
supports the original PC (ISA) boards as well as PCI, and EISA. If
you have a card like this, say Y here and read the file
- <file:Documentation/digiepca.txt>.
+ <file:Documentation/serial/digiepca.txt>.
To compile this driver as a module, choose M here: the
module will be called epca.
which gives you many serial ports. You would need something like
this to connect more than two modems to your Linux box, for instance
in order to become a dial-in server. If you have a card like that,
- say Y here and read the file <file:Documentation/riscom8.txt>.
+ say Y here and read the file <file:Documentation/serial/riscom8.txt>.
Also it's possible to say M here and compile this driver as kernel
loadable module; the module will be called riscom8.
your Linux box, for instance in order to become a dial-in server.
If you have a card like that, say Y here and read the file
- <file:Documentation/specialix.txt>. Also it's possible to say M here
- and compile this driver as kernel loadable module which will be
+ <file:Documentation/serial/specialix.txt>. Also it's possible to say
+ M here and compile this driver as kernel loadable module which will be
called specialix.
config SX
depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
This is a driver for the SX and SI multiport serial cards.
- Please read the file <file:Documentation/sx.txt> for details.
+ Please read the file <file:Documentation/serial/sx.txt> for details.
This driver can only be built as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
like this to connect more than two modems to your Linux box, for
instance in order to become a dial-in server. If you say Y here,
you will be asked for your specific card model in the next
- questions. Make sure to read <file:Documentation/stallion.txt> in
- this case. If you have never heard about all this, it's safe to
+ questions. Make sure to read <file:Documentation/serial/stallion.txt>
+ in this case. If you have never heard about all this, it's safe to
say N.
config STALLION
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
- <file:Documentation/stallion.txt>.
+ <file:Documentation/serial/stallion.txt>.
To compile this driver as a module, choose M here: the
module will be called stallion.
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
- <file:Documentation/stallion.txt>.
+ <file:Documentation/serial/stallion.txt>.
To compile this driver as a module, choose M here: the
module will be called istallion.
To compile this driver as a module, choose M here: the
module will be called js-rtc.
-config SGI_DS1286
- tristate "SGI DS1286 RTC support"
- depends on SGI_HAS_DS1286
- help
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock built into your computer.
- Every SGI has such a clock built in. It reports status information
- via the file /proc/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
-config SGI_IP27_RTC
- bool "SGI M48T35 RTC support"
- depends on SGI_IP27
- help
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock built into your computer.
- Every SGI has such a clock built in. It reports status information
- via the file /proc/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
config GEN_RTC
tristate "Generic /dev/rtc emulation"
depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
projects / linux-2.6-omap-h63xx.git / blobdiff