unsigned char key, asc, ascq; /* May be valid if error==-EIO */
int stat_count; /* Retries getting status. */
+ unsigned int timeo; /* jiffies until rq->timeout changes */
unsigned int len; /* Requested length */
unsigned int current_sg;
int openc; /* protected by ub_lock! */
/* kref is too implicit for our taste */
int reset; /* Reset is running */
+ int bad_resid;
unsigned int tagcnt;
char name[12];
struct usb_device *dev;
struct work_struct reset_work;
wait_queue_head_t reset_wait;
-
- int sg_stat[6];
};
/*
goto drop;
}
urq->nsg = n_elem;
- sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
if (blk_pc_request(rq)) {
ub_cmd_build_packet(sc, lun, cmd, urq);
cmd->cdb_len = rq->cmd_len;
cmd->len = rq->data_len;
+
+ /*
+ * To reapply this to every URB is not as incorrect as it looks.
+ * In return, we avoid any complicated tracking calculations.
+ */
+ cmd->timeo = rq->timeout;
}
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
- if ((cmd->key == MEDIUM_ERROR ||
- cmd->key == UNIT_ATTENTION) &&
- ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
- return;
scsi_status = SAM_STAT_CHECK_CONDITION;
} else {
scsi_status = 0;
else
scsi_status = DID_ERROR << 16;
} else {
- if (cmd->error == -EIO) {
+ if (cmd->error == -EIO &&
+ (cmd->key == 0 ||
+ cmd->key == MEDIUM_ERROR ||
+ cmd->key == UNIT_ATTENTION)) {
if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
return;
}
return;
}
- len = le32_to_cpu(bcs->Residue);
- if (len != cmd->len - cmd->act_len) {
- /*
- * It is all right to transfer less, the caller has
- * to check. But it's not all right if the device
- * counts disagree with our counts.
- */
- goto Bad_End;
+ if (!sc->bad_resid) {
+ len = le32_to_cpu(bcs->Residue);
+ if (len != cmd->len - cmd->act_len) {
+ /*
+ * Only start ignoring if this cmd ended well.
+ */
+ if (cmd->len == cmd->act_len) {
+ printk(KERN_NOTICE "%s: "
+ "bad residual %d of %d, ignoring\n",
+ sc->name, len, cmd->len);
+ sc->bad_resid = 1;
+ }
+ }
}
switch (bcs->Status) {
ub_state_done(sc, cmd, -EIO);
} else {
- printk(KERN_WARNING "%s: "
- "wrong command state %d\n",
+ printk(KERN_WARNING "%s: wrong command state %d\n",
sc->name, cmd->state);
ub_state_done(sc, cmd, -EINVAL);
return;
return;
}
- sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
+ if (cmd->timeo)
+ sc->work_timer.expires = jiffies + cmd->timeo;
+ else
+ sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_DATA;
return -1;
}
- sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
+ if (cmd->timeo)
+ sc->work_timer.expires = jiffies + cmd->timeo;
+ else
+ sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
add_timer(&sc->work_timer);
return 0;
}
return;
}
if (cmd->state != UB_CMDST_SENSE) {
- printk(KERN_WARNING "%s: "
- "sense done with bad cmd state %d\n",
+ printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
sc->name, cmd->state);
return;
}
* This is mostly needed to keep refcounting, but also to support
* media checks on removable media drives.
*/
-static int ub_bd_open(struct inode *inode, struct file *filp)
+static int ub_bd_open(struct block_device *bdev, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ub_lun *lun = disk->private_data;
+ struct ub_lun *lun = bdev->bd_disk->private_data;
struct ub_dev *sc = lun->udev;
unsigned long flags;
int rc;
spin_unlock_irqrestore(&ub_lock, flags);
if (lun->removable || lun->readonly)
- check_disk_change(inode->i_bdev);
+ check_disk_change(bdev);
/*
* The sd.c considers ->media_present and ->changed not equivalent,
* under some pretty murky conditions (a failure of READ CAPACITY).
* We may need it one day.
*/
- if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
+ if (lun->removable && lun->changed && !(mode & FMODE_NDELAY)) {
rc = -ENOMEDIUM;
goto err_open;
}
- if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
+ if (lun->readonly && (mode & FMODE_WRITE)) {
rc = -EROFS;
goto err_open;
}
/*
*/
-static int ub_bd_release(struct inode *inode, struct file *filp)
+static int ub_bd_release(struct gendisk *disk, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
struct ub_lun *lun = disk->private_data;
struct ub_dev *sc = lun->udev;
/*
* The ioctl interface.
*/
-static int ub_bd_ioctl(struct inode *inode, struct file *filp,
+static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct gendisk *disk = bdev->bd_disk;
void __user *usermem = (void __user *) arg;
- return scsi_cmd_ioctl(filp, disk->queue, disk, cmd, usermem);
+ return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
}
/*
- * This is called once a new disk was seen by the block layer or by ub_probe().
+ * This is called by check_disk_change if we reported a media change.
* The main onjective here is to discover the features of the media such as
* the capacity, read-only status, etc. USB storage generally does not
* need to be spun up, but if we needed it, this would be the place.
.owner = THIS_MODULE,
.open = ub_bd_open,
.release = ub_bd_release,
- .ioctl = ub_bd_ioctl,
+ .locked_ioctl = ub_bd_ioctl,
.media_changed = ub_bd_media_changed,
.revalidate_disk = ub_bd_revalidate,
};
}
if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: failed endpoint check\n",
- sc->name);
+ printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
return -ENODEV;
}
spin_unlock_irqrestore(&ub_lock, flags);
/*
- * Fence stall clearnings, operations triggered by unlinkings and so on.
+ * Fence stall clearings, operations triggered by unlinkings and so on.
* We do not attempt to unlink any URBs, because we do not trust the
* unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
*/
spin_unlock_irqrestore(sc->lock, flags);
/*
- * There is virtually no chance that other CPU runs times so long
+ * There is virtually no chance that other CPU runs a timeout so long
* after ub_urb_complete should have called del_timer, but only if HCD
* didn't forget to deliver a callback on unlink.
*/