struct prde *prd_ptr_to_indirect_ext = NULL;
unsigned indirect_ext_segment_sz = 0;
dma_addr_t indirect_ext_segment_paddr;
+ unsigned int si;
VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd);
indirect_ext_segment_paddr = cmd_desc_paddr +
SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t sg_addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
ata_port_printk(qc->ap, KERN_ERR,
"s/g len unaligned : 0x%x\n", sg_len);
- if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) &&
- (qc->n_iter + 1 != qc->n_elem)) {
+ if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) &&
+ sg_next(sg) != NULL) {
VPRINTK("setting indirect prde\n");
prd_ptr_to_indirect_ext = prd;
prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
}
/* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
- if (is_atapi_taskfile(&qc->tf)) {
+ if (ata_is_atapi(qc->tf.protocol)) {
desc_info |= ATAPI_CMD;
memset((void *)&cd->acmd, 0, 32);
memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
+#ifdef CONFIG_MPC8315_DS
/*
* Workaround for 8315DS board 3gbps link-up issue,
* currently limit SATA port to GEN1 speed
sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
+#endif
return 0;
}
u8 *cfis;
u32 Serror;
int i = 0;
- struct ata_queued_cmd qc;
- u8 *buf;
- dma_addr_t dma_address;
- struct scatterlist *sg;
unsigned long start_jiffies;
DPRINTK("in xx_softreset\n");
* reached here, we can send a command to the target device
*/
- if (link->sactive)
- goto skip_srst_do_ncq_error_handling;
-
DPRINTK("Sending SRST/device reset\n");
ata_tf_init(link->device, &tf);
* command bit of the CCreg
*/
iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
- goto check_device_signature;
-
-skip_srst_do_ncq_error_handling:
-
- VPRINTK("Sending read log ext(10h) command\n");
-
- memset(&qc, 0, sizeof(struct ata_queued_cmd));
- ata_tf_init(link->device, &tf);
-
- tf.command = ATA_CMD_READ_LOG_EXT;
- tf.lbal = ATA_LOG_SATA_NCQ;
- tf.nsect = 1;
- tf.hob_nsect = 0;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_PIO;
-
- qc.tag = ATA_TAG_INTERNAL;
- qc.scsicmd = NULL;
- qc.ap = ap;
- qc.dev = link->device;
-
- qc.tf = tf;
- qc.flags |= ATA_QCFLAG_RESULT_TF;
- qc.dma_dir = DMA_FROM_DEVICE;
-
- buf = ap->sector_buf;
- ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
-
- /*
- * Need to DMA-map the memory buffer associated with the command
- */
-
- sg = qc.__sg;
- dma_address = dma_map_single(ap->dev, qc.buf_virt,
- sg->length, DMA_FROM_DEVICE);
-
- sg_dma_address(sg) = dma_address;
- sg_dma_len(sg) = sg->length;
-
- VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
-
- sata_fsl_qc_prep(&qc);
- sata_fsl_qc_issue(&qc);
-
- temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
- if (temp & 0x1) {
- VPRINTK("READ_LOG_EXT_10H issue failed\n");
-
- VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
- ioread32(CQ + hcr_base),
- ioread32(CA + hcr_base), ioread32(CC + hcr_base));
-
- sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
-
- VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
- VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
- VPRINTK("Serror = 0x%x\n", Serror);
- goto err;
- }
-
- iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
-
-check_device_signature:
DPRINTK("SATA FSL : Now checking device signature\n");
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sata_fsl_ops = {