pata_hpt366: no ATAPI DMA

[linux-2.6-omap-h63xx.git] / drivers / ata / pata_hpt366.c

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index b62d398ed84bf45a817372d400f00e1efe33b68e..e0c4f05d7d579a807becb30af2bf44b3a9ea7260 100644 (file)
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -183,8 +183,10 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
                        mask &= ~(0xF8 << ATA_SHIFT_UDMA);
                if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
                        mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-       }
-       return ata_pci_default_filter(adev, mask);
+       } else if (adev->class == ATA_DEV_ATAPI)
+               mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
+       return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-       u8 ata66;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+       u8 ata66;
 
+       /*
+        * Each channel of pata_hpt366 occupies separate PCI function
+        * as the primary channel and bit1 indicates the cable type.
+        */
        pci_read_config_byte(pdev, 0x5A, &ata66);
-       if (ata66 & (1 << ap->port_no))
+       if (ata66 & 2)
                return ATA_CBL_PATA40;
        return ATA_CBL_PATA80;
 }
@@ -356,9 +362,9 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                .udma_mask = ATA_UDMA4,
                .port_ops = &hpt366_port_ops
        };
-       struct ata_port_info info = info_hpt366;
-       const struct ata_port_info *ppi[] = { &info, NULL };
+       const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
 
+       void *hpriv = NULL;
        u32 class_rev;
        u32 reg1;
        int rc;
@@ -382,18 +388,18 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        /* PCI clocking determines the ATA timing values to use */
        /* info_hpt366 is safe against re-entry so we can scribble on it */
        switch((reg1 & 0x700) >> 8) {
-               case 5:
-                       info.private_data = &hpt366_40;
-                       break;
                case 9:
-                       info.private_data = &hpt366_25;
+                       hpriv = &hpt366_40;
+                       break;
+               case 5:
+                       hpriv = &hpt366_25;
                        break;
                default:
-                       info.private_data = &hpt366_33;
+                       hpriv = &hpt366_33;
                        break;
        }
        /* Now kick off ATA set up */
-       return ata_pci_init_one(dev, ppi, &hpt36x_sht);
+       return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
 }
 
 #ifdef CONFIG_PM