sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
- sectors |= (tf->hob_lbal & 0xff) << 24;
+ sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
/**
* ata_pio_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
- * @fn: workqueue function to be scheduled
* @data: data for @fn to use
* @delay: delay time in msecs for workqueue function
*
else
tag = 0;
- if (test_and_set_bit(tag, &ap->qc_allocated))
- BUG();
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
struct ata_link *link;
struct ata_device *dev;
- /* If the controller thinks we are 40 wire, we are */
+ /* If the controller thinks we are 40 wire, we are. */
if (ap->cbl == ATA_CBL_PATA40)
return 1;
- /* If the controller thinks we are 80 wire, we are */
+
+ /* If the controller thinks we are 80 wire, we are. */
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
return 0;
- /* If the system is known to be 40 wire short cable (eg laptop),
- then we allow 80 wire modes even if the drive isn't sure */
+
+ /* If the system is known to be 40 wire short cable (eg
+ * laptop), then we allow 80 wire modes even if the drive
+ * isn't sure.
+ */
if (ap->cbl == ATA_CBL_PATA40_SHORT)
return 0;
- /* If the controller doesn't know we scan
-
- - Note: We look for all 40 wire detects at this point.
- Any 80 wire detect is taken to be 80 wire cable
- because
- - In many setups only the one drive (slave if present)
- will give a valid detect
- - If you have a non detect capable drive you don't
- want it to colour the choice
- */
+
+ /* If the controller doesn't know, we scan.
+ *
+ * Note: We look for all 40 wire detects at this point. Any
+ * 80 wire detect is taken to be 80 wire cable because
+ * - in many setups only the one drive (slave if present) will
+ * give a valid detect
+ * - if you have a non detect capable drive you don't want it
+ * to colour the choice
+ */
ata_port_for_each_link(link, ap) {
ata_link_for_each_dev(dev, link) {
- if (!ata_is_40wire(dev))
+ if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
return 0;
}
}
#endif /* __BIG_ENDIAN */
}
-/**
- * ata_qc_new - Request an available ATA command, for queueing
- * @ap: Port associated with device @dev
- * @dev: Device from whom we request an available command structure
- *
- * LOCKING:
- * None.
- */
-
-static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
-{
- struct ata_queued_cmd *qc = NULL;
- unsigned int i;
-
- /* no command while frozen */
- if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
- return NULL;
-
- /* the last tag is reserved for internal command. */
- for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
- if (!test_and_set_bit(i, &ap->qc_allocated)) {
- qc = __ata_qc_from_tag(ap, i);
- break;
- }
-
- if (qc)
- qc->tag = i;
-
- return qc;
-}
-
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
+ * @tag: command tag
*
* LOCKING:
* None.
*/
-struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
{
struct ata_port *ap = dev->link->ap;
struct ata_queued_cmd *qc;
- qc = ata_qc_new(ap);
+ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
+ return NULL;
+
+ qc = __ata_qc_from_tag(ap, tag);
if (qc) {
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
+ qc->tag = tag;
ata_qc_reinit(qc);
}
return qc;
}
-/**
- * ata_qc_free - free unused ata_queued_cmd
- * @qc: Command to complete
- *
- * Designed to free unused ata_queued_cmd object
- * in case something prevents using it.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_qc_free(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int tag;
-
- WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
-
- qc->flags = 0;
- tag = qc->tag;
- if (likely(ata_tag_valid(tag))) {
- qc->tag = ATA_TAG_POISON;
- clear_bit(tag, &ap->qc_allocated);
- }
-}
-
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
#ifdef CONFIG_ATA_SFF
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#else
+ INIT_DELAYED_WORK(&ap->port_task, NULL);
#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
projects / linux-2.6-omap-h63xx.git / blobdiff