* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+/* Uncomment next line to get verbose print outs*/
+/* #define DEBUG */
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#undef PREFIX
#define PREFIX "ACPI: EC: "
-/* Uncomment next line to get verbose print outs*/
-/* #define DEBUG */
-
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */
EC_FLAGS_QUERY_PENDING, /* Query is pending */
EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */
- EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */
+ EC_FLAGS_NO_ADDRESS_GPE, /* Expect GPE only for non-address event */
+ EC_FLAGS_ADDRESS, /* Address is being written */
+ EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */
+ EC_FLAGS_WDATA, /* Data is being written */
+ EC_FLAGS_NO_OBF1_GPE, /* Don't expect GPE before read */
};
static int acpi_ec_remove(struct acpi_device *device, int type);
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
u8 x = inb(ec->command_addr);
- pr_debug(PREFIX "---> status = 0x%2x\n", x);
+ pr_debug(PREFIX "---> status = 0x%2.2x\n", x);
return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
u8 x = inb(ec->data_addr);
- pr_debug(PREFIX "---> data = 0x%2x\n", x);
+ pr_debug(PREFIX "---> data = 0x%2.2x\n", x);
return inb(ec->data_addr);
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
- pr_debug(PREFIX "<--- command = 0x%2x\n", command);
+ pr_debug(PREFIX "<--- command = 0x%2.2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
- pr_debug(PREFIX "<--- data = 0x%2x\n", data);
+ pr_debug(PREFIX "<--- data = 0x%2.2x\n", data);
outb(data, ec->data_addr);
}
static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
+ int ret = 0;
+
+ if (unlikely(event == ACPI_EC_EVENT_OBF_1 &&
+ test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags)))
+ force_poll = 1;
+ if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) &&
+ test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags)))
+ force_poll = 1;
+ if (unlikely(test_bit(EC_FLAGS_WDATA, &ec->flags) &&
+ test_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags)))
+ force_poll = 1;
if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
likely(!force_poll)) {
if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
msecs_to_jiffies(ACPI_EC_DELAY)))
- return 0;
+ goto end;
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (acpi_ec_check_status(ec, event)) {
if (event == ACPI_EC_EVENT_OBF_1) {
- /* miss OBF = 1 GPE, don't expect it anymore */
- pr_info(PREFIX "missing OBF_1 confirmation,"
- "switching to degraded mode.\n");
- set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
+ /* miss OBF_1 GPE, don't expect it */
+ pr_info(PREFIX "missing OBF confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags);
+ } else if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
+ /* miss address GPE, don't expect it anymore */
+ pr_info(PREFIX "missing address confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags);
+ } else if (test_bit(EC_FLAGS_WDATA, &ec->flags)) {
+ /* miss write data GPE, don't expect it */
+ pr_info(PREFIX "missing write data confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags);
} else {
/* missing GPEs, switch back to poll mode */
if (printk_ratelimit())
- pr_info(PREFIX "missing IBF_1 confirmations,"
+ pr_info(PREFIX "missing confirmations, "
"switch off interrupt mode.\n");
clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
- return 0;
+ goto end;
}
} else {
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
- return 0;
+ goto end;
}
}
pr_err(PREFIX "acpi_ec_wait timeout,"
" status = %d, expect_event = %d\n",
acpi_ec_read_status(ec), event);
- return -ETIME;
+ ret = -ETIME;
+ end:
+ clear_bit(EC_FLAGS_ADDRESS, &ec->flags);
+ return ret;
}
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
"write_cmd timeout, command = %d\n", command);
goto end;
}
+ /* mark the address byte written to EC */
+ if (rdata_len + wdata_len > 1)
+ set_bit(EC_FLAGS_ADDRESS, &ec->flags);
set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
+ set_bit(EC_FLAGS_WDATA, &ec->flags);
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
pr_err(PREFIX
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
for (; rdata_len > 0; --rdata_len) {
- if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags))
- force_poll = 1;
result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
if (result) {
pr_err(PREFIX "read timeout, command = %d\n", command);
return 0;
}
+int __init acpi_boot_ec_enable(void)
+{
+ if (!boot_ec || boot_ec->handlers_installed)
+ return 0;
+ if (!ec_install_handlers(boot_ec)) {
+ first_ec = boot_ec;
+ return 0;
+ }
+ return -EFAULT;
+}
+
int __init acpi_ec_ecdt_probe(void)
{
int ret;
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
} else {
+ /* This workaround is needed only on some broken machines,
+ * which require early EC, but fail to provide ECDT */
+ acpi_handle x;
printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
boot_ec, NULL);
/* Check that acpi_get_devices actually find something */
if (ACPI_FAILURE(status) || !boot_ec->handle)
goto error;
+ /* We really need to limit this workaround, the only ASUS,
+ * which needs it, has fake EC._INI method, so use it as flag.
+ * Keep boot_ec struct as it will be needed soon.
+ */
+ if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
+ return -ENODEV;
}
ret = ec_install_handlers(boot_ec);