#include <asm/io_apic.h>
#include <asm/ist.h>
#include <asm/vmi.h>
-#include <setup_arch.h>
+#include <asm/setup_arch.h>
#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/vsyscall.h>
-#include <asm/smp.h>
+#include <asm/cpu.h>
#include <asm/desc.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
-#include <mach_apic.h>
#include <asm/paravirt.h>
#include <asm/hypervisor.h>
#define ARCH_SETUP
#endif
+unsigned int boot_cpu_id __read_mostly;
+
+#ifdef CONFIG_X86_64
+int default_cpu_present_to_apicid(int mps_cpu)
+{
+ return __default_cpu_present_to_apicid(mps_cpu);
+}
+
+int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
+#endif
+
#ifndef CONFIG_DEBUG_BOOT_PARAMS
struct boot_params __initdata boot_params;
#else
early_param("elfcorehdr", setup_elfcorehdr);
#endif
-static int __init default_update_genapic(void)
+static int __init default_update_apic(void)
{
-#ifdef CONFIG_X86_SMP
-# if defined(CONFIG_X86_GENERICARCH) || defined(CONFIG_X86_64)
- genapic->wakeup_cpu = wakeup_secondary_cpu_via_init;
-# endif
+#ifdef CONFIG_SMP
+ if (!apic->wakeup_cpu)
+ apic->wakeup_cpu = wakeup_secondary_cpu_via_init;
#endif
return 0;
}
static struct x86_quirks default_x86_quirks __initdata = {
- .update_genapic = default_update_genapic,
+ .update_apic = default_update_apic,
};
struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
#else
num_physpages = max_pfn;
- if (cpu_has_x2apic)
- check_x2apic();
+ check_x2apic();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
*/
acpi_reserve_bootmem();
#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
/*
* Find and reserve possible boot-time SMP configuration:
*/
find_smp_config();
-#endif
+
reserve_crashkernel();
#ifdef CONFIG_X86_64
map_vsyscall();
#endif
-#ifdef CONFIG_X86_GENERICARCH
generic_apic_probe();
-#endif
early_quirks();
#endif
}
+#ifdef CONFIG_X86_32
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+ init_ISA_irqs();
+}
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+ if (x86_quirks->arch_intr_init) {
+ if (x86_quirks->arch_intr_init())
+ return;
+ }
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ * generally used to activate any machine specific identification
+ * routines that may be needed before setup_arch() runs. On Voyager
+ * this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+ if (x86_quirks->arch_trap_init) {
+ if (x86_quirks->arch_trap_init())
+ return;
+ }
+}
+
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
+ .mask = CPU_MASK_NONE,
+ .name = "timer"
+};
+
+/**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+ if (x86_quirks->arch_pre_time_init)
+ x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+ if (x86_quirks->arch_time_init) {
+ /*
+ * A nonzero return code does not mean failure, it means
+ * that the architecture quirk does not want any
+ * generic (timer) setup to be performed after this:
+ */
+ if (x86_quirks->arch_time_init())
+ return;
+ }
+
+ irq0.mask = cpumask_of_cpu(0);
+ setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
+ * along the MCA bus. Use this to hook into that chain if you will need
+ * it.
+ **/
+void mca_nmi_hook(void)
+{
+ /*
+ * If I recall correctly, there's a whole bunch of other things that
+ * we can do to check for NMI problems, but that's all I know about
+ * at the moment.
+ */
+ pr_warning("NMI generated from unknown source!\n");
+}
+#endif /* CONFIG_MCA */
+#endif /* CONFIG_X86_32 */
projects / linux-2.6-omap-h63xx.git / blobdiff