static DEFINE_SPINLOCK(ioapic_lock);
static DEFINE_SPINLOCK(vector_lock);
-int timer_over_8254 __initdata = 1;
+int timer_through_8259 __initdata;
/*
* Is the SiS APIC rmw bug present ?
}
/*
- * Set up the 8259A-master output pin:
+ * Set up the timer pin, possibly with the 8259A-master behind.
*/
-static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
+static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+ int vector)
{
struct IO_APIC_route_entry entry;
memset(&entry,0,sizeof(entry));
- disable_8259A_irq(0);
-
- /* mask LVT0 */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-
/*
* We use logical delivery to get the timer IRQ
* to the first CPU.
*/
entry.dest_mode = INT_DEST_MODE;
- entry.mask = 0; /* unmask IRQ now */
+ entry.mask = 1; /* mask IRQ now */
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
entry.delivery_mode = INT_DELIVERY_MODE;
entry.polarity = 0;
/*
* The timer IRQ doesn't have to know that behind the
- * scene we have a 8259A-master in AEOI mode ...
+ * scene we may have a 8259A-master in AEOI mode ...
*/
- irq_desc[0].chip = &ioapic_chip;
- set_irq_handler(0, handle_edge_irq);
+ ioapic_register_intr(0, vector, IOAPIC_EDGE);
/*
* Add it to the IO-APIC irq-routing table:
*/
ioapic_write_entry(apic, pin, entry);
-
- enable_8259A_irq(0);
}
void __init print_IO_APIC(void)
}
static struct irq_chip lapic_chip __read_mostly = {
- .name = "local-APIC-edge",
+ .name = "local-APIC",
.mask = mask_lapic_irq,
.unmask = unmask_lapic_irq,
.eoi = ack_apic,
* cycles as some i82489DX-based boards have glue logic that keeps the
* 8259A interrupt line asserted until INTA. --macro
*/
-static inline void unlock_ExtINT_logic(void)
+static inline void __init unlock_ExtINT_logic(void)
{
int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
static inline void __init check_timer(void)
{
int apic1, pin1, apic2, pin2;
+ int no_pin1 = 0;
int vector;
unsigned int ver;
unsigned long flags;
set_intr_gate(vector, interrupt[0]);
/*
- * Subtle, code in do_timer_interrupt() expects an AEOI
- * mode for the 8259A whenever interrupts are routed
- * through I/O APICs. Also IRQ0 has to be enabled in
- * the 8259A which implies the virtual wire has to be
- * disabled in the local APIC. Finally timer interrupts
- * need to be acknowledged manually in the 8259A for
- * timer_interrupt() and for the i82489DX when using
- * the NMI watchdog.
+ * As IRQ0 is to be enabled in the 8259A, the virtual
+ * wire has to be disabled in the local APIC. Also
+ * timer interrupts need to be acknowledged manually in
+ * the 8259A for the i82489DX when using the NMI
+ * watchdog as that APIC treats NMIs as level-triggered.
+ * The AEOI mode will finish them in the 8259A
+ * automatically.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = !cpu_has_tsc;
- timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
- if (timer_over_8254 > 0)
- enable_8259A_irq(0);
+ timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
vector, apic1, pin1, apic2, pin2);
+ /*
+ * Some BIOS writers are clueless and report the ExtINTA
+ * I/O APIC input from the cascaded 8259A as the timer
+ * interrupt input. So just in case, if only one pin
+ * was found above, try it both directly and through the
+ * 8259A.
+ */
+ if (pin1 == -1) {
+ pin1 = pin2;
+ apic1 = apic2;
+ no_pin1 = 1;
+ } else if (pin2 == -1) {
+ pin2 = pin1;
+ apic2 = apic1;
+ }
+
if (pin1 != -1) {
/*
* Ok, does IRQ0 through the IOAPIC work?
*/
+ if (no_pin1) {
+ add_pin_to_irq(0, apic1, pin1);
+ setup_timer_IRQ0_pin(apic1, pin1, vector);
+ }
unmask_IO_APIC_irq(0);
if (timer_irq_works()) {
if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
setup_nmi();
enable_8259A_irq(0);
}
goto out;
}
clear_IO_APIC_pin(apic1, pin1);
- printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
- "IO-APIC\n");
- }
+ if (!no_pin1)
+ printk(KERN_ERR "..MP-BIOS bug: "
+ "8254 timer not connected to IO-APIC\n");
- printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
- if (pin2 != -1) {
+ printk(KERN_INFO "...trying to set up timer (IRQ0) "
+ "through the 8259A ... ");
printk("\n..... (found pin %d) ...", pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
- setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
+ replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
+ setup_timer_IRQ0_pin(apic2, pin2, vector);
+ unmask_IO_APIC_irq(0);
+ enable_8259A_irq(0);
if (timer_irq_works()) {
printk("works.\n");
- if (pin1 != -1)
- replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
- else
- add_pin_to_irq(0, apic2, pin2);
+ timer_through_8259 = 1;
if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
setup_nmi();
+ enable_8259A_irq(0);
}
goto out;
}
/*
* Cleanup, just in case ...
*/
+ disable_8259A_irq(0);
clear_IO_APIC_pin(apic2, pin2);
+ printk(" failed.\n");
}
- printk(" failed.\n");
if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}
+ timer_ack = 0;
printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
- disable_8259A_irq(0);
set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq,
"fasteoi");
apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
printk(" works.\n");
goto out;
}
+ disable_8259A_irq(0);
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
printk(" failed.\n");
printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
- timer_ack = 0;
init_8259A(0);
make_8259A_irq(0);
apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
print_IO_APIC();
}
-static int __init setup_disable_8254_timer(char *s)
-{
- timer_over_8254 = -1;
- return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
- timer_over_8254 = 2;
- return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
/*
* Called after all the initialization is done. If we didnt find any
* APIC bugs then we can allow the modify fast path
dynamic_irq_cleanup(irq);
spin_lock_irqsave(&vector_lock, flags);
+ clear_bit(irq_vector[irq], used_vectors);
irq_vector[irq] = 0;
spin_unlock_irqrestore(&vector_lock, flags);
}