#include <asm/page.h>
#include <asm/irqflags.h>
#include <asm/paravirt.h>
+#include <asm/ftrace.h>
.code64
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(mcount)
+
+ subq $0x38, %rsp
+ movq %rax, (%rsp)
+ movq %rcx, 8(%rsp)
+ movq %rdx, 16(%rsp)
+ movq %rsi, 24(%rsp)
+ movq %rdi, 32(%rsp)
+ movq %r8, 40(%rsp)
+ movq %r9, 48(%rsp)
+
+ movq 0x38(%rsp), %rdi
+ subq $MCOUNT_INSN_SIZE, %rdi
+
+.globl mcount_call
+mcount_call:
+ call ftrace_stub
+
+ movq 48(%rsp), %r9
+ movq 40(%rsp), %r8
+ movq 32(%rsp), %rdi
+ movq 24(%rsp), %rsi
+ movq 16(%rsp), %rdx
+ movq 8(%rsp), %rcx
+ movq (%rsp), %rax
+ addq $0x38, %rsp
+
+ retq
+END(mcount)
+
+ENTRY(ftrace_caller)
+
+ /* taken from glibc */
+ subq $0x38, %rsp
+ movq %rax, (%rsp)
+ movq %rcx, 8(%rsp)
+ movq %rdx, 16(%rsp)
+ movq %rsi, 24(%rsp)
+ movq %rdi, 32(%rsp)
+ movq %r8, 40(%rsp)
+ movq %r9, 48(%rsp)
+
+ movq 0x38(%rsp), %rdi
+ movq 8(%rbp), %rsi
+ subq $MCOUNT_INSN_SIZE, %rdi
+
+.globl ftrace_call
+ftrace_call:
+ call ftrace_stub
+
+ movq 48(%rsp), %r9
+ movq 40(%rsp), %r8
+ movq 32(%rsp), %rdi
+ movq 24(%rsp), %rsi
+ movq 16(%rsp), %rdx
+ movq 8(%rsp), %rcx
+ movq (%rsp), %rax
+ addq $0x38, %rsp
+
+.globl ftrace_stub
+ftrace_stub:
+ retq
+END(ftrace_caller)
+
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+ENTRY(mcount)
+ cmpq $ftrace_stub, ftrace_trace_function
+ jnz trace
+.globl ftrace_stub
+ftrace_stub:
+ retq
+
+trace:
+ /* taken from glibc */
+ subq $0x38, %rsp
+ movq %rax, (%rsp)
+ movq %rcx, 8(%rsp)
+ movq %rdx, 16(%rsp)
+ movq %rsi, 24(%rsp)
+ movq %rdi, 32(%rsp)
+ movq %r8, 40(%rsp)
+ movq %r9, 48(%rsp)
+
+ movq 0x38(%rsp), %rdi
+ movq 8(%rbp), %rsi
+ subq $MCOUNT_INSN_SIZE, %rdi
+
+ call *ftrace_trace_function
+
+ movq 48(%rsp), %r9
+ movq 40(%rsp), %r8
+ movq 32(%rsp), %rdi
+ movq 24(%rsp), %rsi
+ movq 16(%rsp), %rdx
+ movq 8(%rsp), %rcx
+ movq (%rsp), %rax
+ addq $0x38, %rsp
+
+ jmp ftrace_stub
+END(mcount)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FTRACE */
+
#ifndef CONFIG_PREEMPT
#define retint_kernel retint_restore_args
#endif
#ifdef CONFIG_PARAVIRT
-ENTRY(native_irq_enable_syscall_ret)
- movq %gs:pda_oldrsp,%rsp
+ENTRY(native_usergs_sysret64)
swapgs
sysretq
#endif /* CONFIG_PARAVIRT */
.macro FAKE_STACK_FRAME child_rip
/* push in order ss, rsp, eflags, cs, rip */
xorl %eax, %eax
- pushq %rax /* ss */
+ pushq $__KERNEL_DS /* ss */
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET ss,0*/
pushq %rax /* rsp */
CFI_ADJUST_CFA_OFFSET -4
call schedule_tail
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
jnz rff_trace
rff_action:
RESTORE_REST
testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
je int_ret_from_sys_call
- testl $_TIF_IA32,threadinfo_flags(%rcx)
+ testl $_TIF_IA32,TI_flags(%rcx)
jnz int_ret_from_sys_call
RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
jmp ret_from_sys_call
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
jnz tracesys
cmpq $__NR_syscall_max,%rax
ja badsys
GET_THREAD_INFO(%rcx)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
CFI_REGISTER rip,rcx
RESTORE_ARGS 0,-ARG_SKIP,1
/*CFI_REGISTER rflags,r11*/
- ENABLE_INTERRUPTS_SYSCALL_RET
+ movq %gs:pda_oldrsp, %rsp
+ USERGS_SYSRET64
CFI_RESTORE_STATE
/* Handle reschedules */
leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
xorl %esi,%esi # oldset -> arg2
call ptregscall_common
-1: movl $_TIF_NEED_RESCHED,%edi
+1: movl $_TIF_WORK_MASK,%edi
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
DISABLE_INTERRUPTS(CLBR_NONE)
FIXUP_TOP_OF_STACK %rdi
movq %rsp,%rdi
call syscall_trace_enter
- LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
+ /*
+ * Reload arg registers from stack in case ptrace changed them.
+ * We don't reload %rax because syscall_trace_enter() returned
+ * the value it wants us to use in the table lookup.
+ */
+ LOAD_ARGS ARGOFFSET, 1
RESTORE_REST
cmpq $__NR_syscall_max,%rax
ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
int_with_check:
LOCKDEP_SYS_EXIT_IRQ
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz int_careful
- andl $~TS_COMPAT,threadinfo_status(%rcx)
+ andl $~TS_COMPAT,TI_status(%rcx)
jmp retint_swapgs
/* Either reschedule or signal or syscall exit tracking needed. */
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_REST
/* Check for syscall exit trace */
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+ testl $_TIF_WORK_SYSCALL_EXIT,%edx
jz int_signal
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call syscall_trace_leave
popq %rdi
CFI_ADJUST_CFA_OFFSET -8
- andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+ andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
jmp int_restore_rest
int_signal:
movq %rsp,%rdi # &ptregs -> arg1
xorl %esi,%esi # oldset -> arg2
call do_notify_resume
-1: movl $_TIF_NEED_RESCHED,%edi
+1: movl $_TIF_WORK_MASK,%edi
int_restore_rest:
RESTORE_REST
DISABLE_INTERRUPTS(CLBR_NONE)
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
- PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
PTREGSCALL stub_iopl, sys_iopl, %rsi
movl $_TIF_WORK_MASK,%edi
retint_check:
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
CFI_REMEMBER_STATE
jnz retint_careful
RESTORE_REST
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl $_TIF_NEED_RESCHED,%edi
GET_THREAD_INFO(%rcx)
- jmp retint_check
+ jmp retint_with_reschedule
#ifdef CONFIG_PREEMPT
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
ENTRY(retint_kernel)
- cmpl $0,threadinfo_preempt_count(%rcx)
+ cmpl $0,TI_preempt_count(%rcx)
jnz retint_restore_args
- bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+ bt $TIF_NEED_RESCHED,TI_flags(%rcx)
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
ENTRY(call_function_interrupt)
apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
END(call_function_interrupt)
+ENTRY(call_function_single_interrupt)
+ apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
+END(call_function_single_interrupt)
ENTRY(irq_move_cleanup_interrupt)
apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
END(irq_move_cleanup_interrupt)
apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
END(apic_timer_interrupt)
+ENTRY(uv_bau_message_intr1)
+ apicinterrupt 220,uv_bau_message_interrupt
+END(uv_bau_message_intr1)
+
ENTRY(error_interrupt)
apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
END(error_interrupt)
*/
.macro zeroentry sym
INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $0 /* push error code/oldrax */
CFI_ADJUST_CFA_OFFSET 8
pushq %rax /* push real oldrax to the rdi slot */
.macro errorentry sym
XCPT_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq %rax
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rax,0
jmp irq_return
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%ebx
+ movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs\trace
movq %rsp,%rdi /* &pt_regs */
testl %eax,%eax
jne retint_kernel
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
iret run with kernel gs again, so don't set the user space flag.
B stepping K8s sometimes report an truncated RIP for IRET
exceptions returning to compat mode. Check for these here too. */
- leaq irq_return(%rip),%rbp
- cmpq %rbp,RIP(%rsp)
+ leaq irq_return(%rip),%rcx
+ cmpq %rcx,RIP(%rsp)
je error_swapgs
- movl %ebp,%ebp /* zero extend */
- cmpq %rbp,RIP(%rsp)
+ movl %ecx,%ecx /* zero extend */
+ cmpq %rcx,RIP(%rsp)
je error_swapgs
cmpq $gs_change,RIP(%rsp)
je error_swapgs
/* Reload gs selector with exception handling */
/* edi: new selector */
-ENTRY(load_gs_index)
+ENTRY(native_load_gs_index)
CFI_STARTPROC
pushf
CFI_ADJUST_CFA_OFFSET 8
CFI_ADJUST_CFA_OFFSET -8
ret
CFI_ENDPROC
-ENDPROC(load_gs_index)
+ENDPROC(native_load_gs_index)
.section __ex_table,"a"
.align 8
/* runs on exception stack */
KPROBE_ENTRY(debug)
INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $0
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_debug, DEBUG_STACK
/* runs on exception stack */
KPROBE_ENTRY(nmi)
INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $-1
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_nmi, 0, 0
KPROBE_ENTRY(int3)
INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $0
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_int3, DEBUG_STACK
zeroentry do_coprocessor_segment_overrun
END(coprocessor_segment_overrun)
-ENTRY(reserved)
- zeroentry do_reserved
-END(reserved)
-
/* runs on exception stack */
ENTRY(double_fault)
XCPT_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
paranoidentry do_double_fault
jmp paranoid_exit1
CFI_ENDPROC
/* runs on exception stack */
ENTRY(stack_segment)
XCPT_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
paranoidentry do_stack_segment
jmp paranoid_exit1
CFI_ENDPROC
/* runs on exception stack */
ENTRY(machine_check)
INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $0
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_machine_check
sysret
CFI_ENDPROC
ENDPROC(ignore_sysret)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+ zeroentry xen_do_hypervisor_callback
+END(xen_hypervisor_callback)
+
+/*
+# A note on the "critical region" in our callback handler.
+# We want to avoid stacking callback handlers due to events occurring
+# during handling of the last event. To do this, we keep events disabled
+# until we've done all processing. HOWEVER, we must enable events before
+# popping the stack frame (can't be done atomically) and so it would still
+# be possible to get enough handler activations to overflow the stack.
+# Although unlikely, bugs of that kind are hard to track down, so we'd
+# like to avoid the possibility.
+# So, on entry to the handler we detect whether we interrupted an
+# existing activation in its critical region -- if so, we pop the current
+# activation and restart the handler using the previous one.
+*/
+ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
+ CFI_STARTPROC
+/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+ see the correct pointer to the pt_regs */
+ movq %rdi, %rsp # we don't return, adjust the stack frame
+ CFI_ENDPROC
+ CFI_DEFAULT_STACK
+11: incl %gs:pda_irqcount
+ movq %rsp,%rbp
+ CFI_DEF_CFA_REGISTER rbp
+ cmovzq %gs:pda_irqstackptr,%rsp
+ pushq %rbp # backlink for old unwinder
+ call xen_evtchn_do_upcall
+ popq %rsp
+ CFI_DEF_CFA_REGISTER rsp
+ decl %gs:pda_irqcount
+ jmp error_exit
+ CFI_ENDPROC
+END(do_hypervisor_callback)
+
+/*
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+# 1. Fault while reloading DS, ES, FS or GS
+# 2. Fault while executing IRET
+# Category 1 we do not need to fix up as Xen has already reloaded all segment
+# registers that could be reloaded and zeroed the others.
+# Category 2 we fix up by killing the current process. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by comparing each saved segment register
+# with its current contents: any discrepancy means we in category 1.
+*/
+ENTRY(xen_failsafe_callback)
+ framesz = (RIP-0x30) /* workaround buggy gas */
+ _frame framesz
+ CFI_REL_OFFSET rcx, 0
+ CFI_REL_OFFSET r11, 8
+ movw %ds,%cx
+ cmpw %cx,0x10(%rsp)
+ CFI_REMEMBER_STATE
+ jne 1f
+ movw %es,%cx
+ cmpw %cx,0x18(%rsp)
+ jne 1f
+ movw %fs,%cx
+ cmpw %cx,0x20(%rsp)
+ jne 1f
+ movw %gs,%cx
+ cmpw %cx,0x28(%rsp)
+ jne 1f
+ /* All segments match their saved values => Category 2 (Bad IRET). */
+ movq (%rsp),%rcx
+ CFI_RESTORE rcx
+ movq 8(%rsp),%r11
+ CFI_RESTORE r11
+ addq $0x30,%rsp
+ CFI_ADJUST_CFA_OFFSET -0x30
+ pushq $0
+ CFI_ADJUST_CFA_OFFSET 8
+ pushq %r11
+ CFI_ADJUST_CFA_OFFSET 8
+ pushq %rcx
+ CFI_ADJUST_CFA_OFFSET 8
+ jmp general_protection
+ CFI_RESTORE_STATE
+1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+ movq (%rsp),%rcx
+ CFI_RESTORE rcx
+ movq 8(%rsp),%r11
+ CFI_RESTORE r11
+ addq $0x30,%rsp
+ CFI_ADJUST_CFA_OFFSET -0x30
+ pushq $0
+ CFI_ADJUST_CFA_OFFSET 8
+ SAVE_ALL
+ jmp error_exit
+ CFI_ENDPROC
+END(xen_failsafe_callback)
+
+#endif /* CONFIG_XEN */
projects / linux-2.6-omap-h63xx.git / blobdiff