if (!printed) {
printed++;
- printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+ printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v);
printk(KERN_ERR "CPU: Your system may be unstable.\n");
}
}
#ifdef CONFIG_X86_64
- /* Transmeta-defined flags: level 0x80860001 */
- xlvl = cpuid_eax(0x80860000);
- if ((xlvl & 0xffff0000) == 0x80860000) {
- /* Don't set x86_cpuid_level here for now to not confuse. */
- if (xlvl >= 0x80860001)
- c->x86_capability[2] = cpuid_edx(0x80860001);
- }
-
- if (c->extended_cpuid_level >= 0x80000007)
- c->x86_power = cpuid_edx(0x80000007);
-
if (c->extended_cpuid_level >= 0x80000008) {
u32 eax = cpuid_eax(0x80000008);
c->x86_phys_bits = eax & 0xff;
}
#endif
+
+ if (c->extended_cpuid_level >= 0x80000007)
+ c->x86_power = cpuid_edx(0x80000007);
+
}
+
+static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_32
+ int i;
+
+ /*
+ * First of all, decide if this is a 486 or higher
+ * It's a 486 if we can modify the AC flag
+ */
+ if (flag_is_changeable_p(X86_EFLAGS_AC))
+ c->x86 = 4;
+ else
+ c->x86 = 3;
+
+ for (i = 0; i < X86_VENDOR_NUM; i++)
+ if (cpu_devs[i] && cpu_devs[i]->c_identify) {
+ c->x86_vendor_id[0] = 0;
+ cpu_devs[i]->c_identify(c);
+ if (c->x86_vendor_id[0]) {
+ get_cpu_vendor(c);
+ break;
+ }
+ }
+#endif
+}
+
/*
* Do minimum CPU detection early.
* Fields really needed: vendor, cpuid_level, family, model, mask,
#endif
c->x86_cache_alignment = c->x86_clflush_size;
- if (!have_cpuid_p())
- return;
-
memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
c->extended_cpuid_level = 0;
+ if (!have_cpuid_p())
+ identify_cpu_without_cpuid(c);
+
+ /* cyrix could have cpuid enabled via c_identify()*/
+ if (!have_cpuid_p())
+ return;
+
cpu_detect(c);
get_cpu_vendor(c);
/*
* The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
+ * family >= 6; unfortunately, that's not true in practice because
* of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect. Hence, probe for it based on first
- * principles.
- *
- * Note: no 64-bit chip is known to lack these, but put the code here
- * for consistency with 32 bits, and to make it utterly trivial to
- * diagnose the problem should it ever surface.
+ * are not easy to detect. In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work. Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
*/
static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
{
- const u32 nopl_signature = 0x888c53b1; /* Random number */
- u32 has_nopl = nopl_signature;
-
clear_cpu_cap(c, X86_FEATURE_NOPL);
- if (c->x86 >= 6) {
- asm volatile("\n"
- "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
- "2:\n"
- " .section .fixup,\"ax\"\n"
- "3: xor %0,%0\n"
- " jmp 2b\n"
- " .previous\n"
- _ASM_EXTABLE(1b,3b)
- : "+a" (has_nopl));
-
- if (has_nopl == nopl_signature)
- set_cpu_cap(c, X86_FEATURE_NOPL);
- }
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
{
+ c->extended_cpuid_level = 0;
+
if (!have_cpuid_p())
- return;
+ identify_cpu_without_cpuid(c);
- c->extended_cpuid_level = 0;
+ /* cyrix could have cpuid enabled via c_identify()*/
+ if (!have_cpuid_p())
+ return;
cpu_detect(c);
c->x86_vendor_id[0] = '\0'; /* Unset */
c->x86_model_id[0] = '\0'; /* Unset */
c->x86_max_cores = 1;
-#ifdef CONFIG_X86_64
c->x86_coreid_bits = 0;
+#ifdef CONFIG_X86_64
c->x86_clflush_size = 64;
#else
c->cpuid_level = -1; /* CPUID not detected */
c->x86_cache_alignment = c->x86_clflush_size;
memset(&c->x86_capability, 0, sizeof c->x86_capability);
- if (!have_cpuid_p()) {
- /*
- * First of all, decide if this is a 486 or higher
- * It's a 486 if we can modify the AC flag
- */
- if (flag_is_changeable_p(X86_EFLAGS_AC))
- c->x86 = 4;
- else
- c->x86 = 3;
- }
-
generic_identify(c);
if (this_cpu->c_identify)
char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
-void pda_init(int cpu)
+void __cpuinit pda_init(int cpu)
{
struct x8664_pda *pda = cpu_pda(cpu);