/*
* Local APIC handling, local APIC timers
*
- * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
*
* Fixes
* Maciej W. Rozycki : Bits for genuine 82489DX APICs;
* Mikael Pettersson : PM converted to driver model.
*/
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/cpu.h>
-#include <linux/clockchips.h>
+#include <linux/mc146818rtc.h>
#include <linux/acpi_pmtmr.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/ftrace.h>
+#include <linux/ioport.h>
#include <linux/module.h>
-#include <linux/dmi.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
#include <linux/dmar.h>
-#include <linux/ftrace.h>
-#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/dmi.h>
#include <linux/nmi.h>
-#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
-#include <asm/atomic.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/desc.h>
#include <asm/arch_hooks.h>
-#include <asm/hpet.h>
#include <asm/pgalloc.h>
+#include <asm/genapic.h>
+#include <asm/atomic.h>
+#include <asm/mpspec.h>
#include <asm/i8253.h>
-#include <asm/idle.h>
+#include <asm/i8259.h>
#include <asm/proto.h>
#include <asm/apic.h>
-#include <asm/i8259.h>
+#include <asm/desc.h>
+#include <asm/hpet.h>
+#include <asm/idle.h>
+#include <asm/mtrr.h>
#include <asm/smp.h>
-#include <asm/genapic.h>
-
-/*
- * Sanity check
- */
-#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
-# error SPURIOUS_APIC_VECTOR definition error
-#endif
-
unsigned int num_processors;
+
unsigned disabled_cpus __cpuinitdata;
+
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
-EXPORT_SYMBOL(boot_cpu_physical_apicid);
+
+/*
+ * The highest APIC ID seen during enumeration.
+ *
+ * This determines the messaging protocol we can use: if all APIC IDs
+ * are in the 0 ... 7 range, then we can use logical addressing which
+ * has some performance advantages (better broadcasting).
+ *
+ * If there's an APIC ID above 8, we use physical addressing.
+ */
unsigned int max_physical_apicid;
-/* Bitmask of physically existing CPUs */
+/*
+ * Bitmask of physically existing CPUs:
+ */
physid_mask_t phys_cpu_present_map;
/*
}
}
-static int __init calibrate_by_pmtimer(long deltapm, long *delta)
+static int __init
+calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
{
const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
const long pm_thresh = pm_100ms / 100;
return -1;
#endif
- apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
+ apic_printk(APIC_VERBOSE, "... PM-Timer delta = %ld\n", deltapm);
/* Check, if the PM timer is available */
if (!deltapm)
if (deltapm > (pm_100ms - pm_thresh) &&
deltapm < (pm_100ms + pm_thresh)) {
- apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
- } else {
- res = (((u64)deltapm) * mult) >> 22;
- do_div(res, 1000000);
- pr_warning("APIC calibration not consistent "
- "with PM Timer: %ldms instead of 100ms\n",
- (long)res);
- /* Correct the lapic counter value */
- res = (((u64)(*delta)) * pm_100ms);
+ apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
+ return 0;
+ }
+
+ res = (((u64)deltapm) * mult) >> 22;
+ do_div(res, 1000000);
+ pr_warning("APIC calibration not consistent "
+ "with PM-Timer: %ldms instead of 100ms\n",(long)res);
+
+ /* Correct the lapic counter value */
+ res = (((u64)(*delta)) * pm_100ms);
+ do_div(res, deltapm);
+ pr_info("APIC delta adjusted to PM-Timer: "
+ "%lu (%ld)\n", (unsigned long)res, *delta);
+ *delta = (long)res;
+
+ /* Correct the tsc counter value */
+ if (cpu_has_tsc) {
+ res = (((u64)(*deltatsc)) * pm_100ms);
do_div(res, deltapm);
- pr_info("APIC delta adjusted to PM-Timer: "
- "%lu (%ld)\n", (unsigned long)res, *delta);
- *delta = (long)res;
+ apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
+ "PM-Timer: %lu (%ld) \n",
+ (unsigned long)res, *deltatsc);
+ *deltatsc = (long)res;
}
return 0;
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
void (*real_handler)(struct clock_event_device *dev);
unsigned long deltaj;
- long delta;
+ long delta, deltatsc;
int pm_referenced = 0;
local_irq_disable();
delta = lapic_cal_t1 - lapic_cal_t2;
apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
+ deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
+
/* we trust the PM based calibration if possible */
pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
- &delta);
+ &delta, &deltatsc);
/* Calculate the scaled math multiplication factor */
lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
calibration_result);
if (cpu_has_tsc) {
- delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
"%ld.%04ld MHz.\n",
- (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
- (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+ (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+ (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
}
apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
int i, j;
if (disable_apic) {
-#ifdef CONFIG_X86_IO_APIC
- disable_ioapic_setup();
-#endif
+ arch_disable_smp_support();
return;
}
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
- (boot_cpu_data.x86 == 15))
+ (boot_cpu_data.x86 >= 15))
break;
goto no_apic;
case X86_VENDOR_INTEL: