printk ("RTAS supporting Pegasos OF not found, please upgrade"
" your firmware\n");
}
- pci_assign_all_buses = 1;
+ ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
/* keep the reference to the root node */
}
/* SL82C105 IDE Control/Status Register */
#define SL82C105_IDECSR 0x40
-/* Fixup for Winbond ATA quirk, required for briq */
-void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
+/* Fixup for Winbond ATA quirk, required for briq mostly because the
+ * 8259 is configured for level sensitive IRQ 14 and so wants the
+ * ATA controller to be set to fully native mode or bad things
+ * will happen.
+ */
+static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
{
u8 progif;
sl82c105->class |= 0x05;
/* Disable SL82C105 second port */
pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
+ /* Clear IO BARs, they will be reassigned */
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
- chrp_pci_fixup_winbond_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
+ chrp_pci_fixup_winbond_ata);
/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
* in legacy mode, but sets the PCI registers to PCI native mode.
viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
if (!viaisa)
return;
- printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+ dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);