#include <asm/irq.h>
#include <asm/hydra.h>
#include <asm/prom.h>
-#include <asm/gg2.h>
#include <asm/machdep.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
#include <asm/rtas.h>
#include "chrp.h"
+#include "gg2.h"
/* LongTrail */
void __iomem *gg2_pci_config_base;
static struct pci_ops gg2_pci_ops =
{
- gg2_read_config,
- gg2_write_config
+ .read = gg2_read_config,
+ .write = gg2_write_config,
};
/*
static struct pci_ops rtas_pci_ops =
{
- rtas_read_config,
- rtas_write_config
+ .read = rtas_read_config,
+ .write = rtas_write_config,
};
volatile struct Hydra __iomem *Hydra = NULL;
}
iounmap(reg);
- setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010);
+ setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0);
}
/* Marvell Discovery II based Pegasos 2 */
printk ("RTAS supporting Pegasos OF not found, please upgrade"
" your firmware\n");
}
- pci_assign_all_buses = 1;
+ ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
/* keep the reference to the root node */
}
hose->cfg_data = p;
gg2_pci_config_base = p;
} else if (is_pegasos == 1) {
- setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
+ setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0);
} else if (is_pegasos == 2) {
setup_peg2(hose, dev);
} else if (!strncmp(model, "IBM,CPC710", 10)) {
setup_indirect_pci(hose,
r.start + 0x000f8000,
- r.start + 0x000f8010);
+ r.start + 0x000f8010,
+ 0);
if (index == 0) {
dma = of_get_property(dev, "system-dma-base",
&len);
/* SL82C105 IDE Control/Status Register */
#define SL82C105_IDECSR 0x40
-/* Fixup for Winbond ATA quirk, required for briq */
-void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
+/* Fixup for Winbond ATA quirk, required for briq mostly because the
+ * 8259 is configured for level sensitive IRQ 14 and so wants the
+ * ATA controller to be set to fully native mode or bad things
+ * will happen.
+ */
+static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
{
u8 progif;
sl82c105->class |= 0x05;
/* Disable SL82C105 second port */
pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
+ /* Clear IO BARs, they will be reassigned */
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
+ pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
- chrp_pci_fixup_winbond_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
+ chrp_pci_fixup_winbond_ata);
+
+/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
+ * in legacy mode, but sets the PCI registers to PCI native mode.
+ * The chip can only operate in legacy mode, so force the PCI class into legacy
+ * mode as well. The same fixup must be done to the class-code property in
+ * the IDE node /pci@80000000/ide@C,1
+ */
+static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
+{
+ u8 progif;
+ struct pci_dev *viaisa;
+
+ if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos)
+ return;
+ if (viaide->irq != 14)
+ return;
+
+ viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
+ if (!viaisa)
+ return;
+ dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
+
+ pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
+ viaide->class &= ~0x5;
+
+ pci_dev_put(viaisa);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);