powerpc: Add dma nodes to 83xx, 85xx and 86xx boards

[linux-2.6-omap-h63xx.git] / arch / powerpc / boot / dts / mpc834x_mds.dts

diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c548d80a5dfcfa843da5ad929b41a3ed1f..9c75c7c69e21791f657f25197148ce0c2c6ce281 100644 (file)
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -103,6 +103,41 @@
                        mode = "cpu";
                };
 
+               dma@82a8 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+                       reg = <0x82a8 4>;
+                       ranges = <0 0x8100 0x1a8>;
+                       interrupt-parent = <&ipic>;
+                       interrupts = <71 8>;
+                       cell-index = <0>;
+                       dma-channel@0 {
+                               compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+                       dma-channel@80 {
+                               compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x80 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+                       dma-channel@100 {
+                               compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x100 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+                       dma-channel@180 {
+                               compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x180 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+               };
+
                /* phy type (ULPI or SERIAL) are only types supported for MPH */
                /* port = 0 or 1 */
                usb@22000 {