powerpc: Add dma nodes to 83xx, 85xx and 86xx boards

[linux-2.6-omap-h63xx.git] / arch / powerpc / boot / dts / asp834x-redboot.dts

diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 972cf78fff65ae1f72c30009db4e2d56929f9270..8b1bb0e41905c422a30697c7ae04b9e008589ffb 100644 (file)
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -118,6 +118,41 @@
                        mode = "cpu";
                };
 
+               dma@82a8 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+                       reg = <0x82a8 4>;
+                       ranges = <0 0x8100 0x1a8>;
+                       interrupt-parent = <&ipic>;
+                       interrupts = <71 8>;
+                       cell-index = <0>;
+                       dma-channel@0 {
+                               compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+                       dma-channel@80 {
+                               compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x80 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+                       dma-channel@100 {
+                               compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x100 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+                       dma-channel@180 {
+                               compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x180 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                       };
+               };
+
                /* phy type (ULPI or SERIAL) are only types supported for MPH */
                /* port = 0 or 1 */
                usb@22000 {