* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
- * Modifications for PA-RISC (C) 1999 Helge Deller <deller@gmx.de>
+ * Modifications for PA-RISC (C) 1999-2008 Helge Deller <deller@gmx.de>
* Modifications copyright 1999 SuSE GmbH (Philipp Rumpf)
* Modifications copyright 2000 Martin K. Petersen <mkp@mkp.net>
* Modifications copyright 2000 Philipp Rumpf <prumpf@tux.org>
struct system_cpuinfo_parisc boot_cpu_data __read_mostly;
EXPORT_SYMBOL(boot_cpu_data);
-struct cpuinfo_parisc cpu_data[NR_CPUS] __read_mostly;
+DEFINE_PER_CPU(struct cpuinfo_parisc, cpu_data);
extern int update_cr16_clocksource(void); /* from time.c */
** will call register_parisc_driver(&cpu_driver) before calling do_inventory().
**
** The goal of consolidating CPU initialization into one place is
-** to make sure all CPU's get initialized the same way.
+** to make sure all CPUs get initialized the same way.
** The code path not shared is how PDC hands control of the CPU to the OS.
** The initialization of OS data structures is the same (done below).
*/
+/**
+ * init_cpu_profiler - enable/setup per cpu profiling hooks.
+ * @cpunum: The processor instance.
+ *
+ * FIXME: doesn't do much yet...
+ */
+static void __cpuinit
+init_percpu_prof(unsigned long cpunum)
+{
+ struct cpuinfo_parisc *p;
+
+ p = &per_cpu(cpu_data, cpunum);
+ p->prof_counter = 1;
+ p->prof_multiplier = 1;
+}
+
+
/**
* processor_probe - Determine if processor driver should claim this device.
* @dev: The device which has been found.
* (return 1). If so, initialize the chip and tell other partners in crime
* they have work to do.
*/
-static int __init processor_probe(struct parisc_device *dev)
+static int __cpuinit processor_probe(struct parisc_device *dev)
{
unsigned long txn_addr;
unsigned long cpuid;
struct cpuinfo_parisc *p;
-#ifndef CONFIG_SMP
+#ifdef CONFIG_SMP
+ if (num_online_cpus() >= nr_cpu_ids) {
+ printk(KERN_INFO "num_online_cpus() >= nr_cpu_ids\n");
+ return 1;
+ }
+#else
if (boot_cpu_data.cpu_count > 0) {
printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n");
return 1;
}
#endif
- p = &cpu_data[cpuid];
+ p = &per_cpu(cpu_data, cpuid);
boot_cpu_data.cpu_count++;
/* initialize counters - CPU 0 gets it_value set in time_init() */
#ifdef CONFIG_SMP
/*
** FIXME: review if any other initialization is clobbered
- ** for boot_cpu by the above memset().
+ ** for boot_cpu by the above memset().
*/
-
- /* stolen from init_percpu_prof() */
- cpu_data[cpuid].prof_counter = 1;
- cpu_data[cpuid].prof_multiplier = 1;
+ init_percpu_prof(cpuid);
#endif
/*
- ** CONFIG_SMP: init_smp_config() will attempt to get CPU's into
+ ** CONFIG_SMP: init_smp_config() will attempt to get CPUs into
** OS control. RENDEZVOUS is the default state - see mem_set above.
** p->state = STATE_RENDEZVOUS;
*/
*/
#ifdef CONFIG_SMP
if (cpuid) {
- cpu_set(cpuid, cpu_present_map);
+ set_cpu_present(cpuid, true);
cpu_up(cpuid);
}
#endif
}
-/**
- * init_cpu_profiler - enable/setup per cpu profiling hooks.
- * @cpunum: The processor instance.
- *
- * FIXME: doesn't do much yet...
- */
-static inline void __init
-init_percpu_prof(int cpunum)
-{
- cpu_data[cpunum].prof_counter = 1;
- cpu_data[cpunum].prof_multiplier = 1;
-}
-
/**
* init_per_cpu - Handle individual processor initializations.
*
* o Enable CPU profiling hooks.
*/
-int __init init_per_cpu(int cpunum)
+int __cpuinit init_per_cpu(int cpunum)
{
int ret;
struct pdc_coproc_cfg coproc_cfg;
/* FWIW, FP rev/model is a more accurate way to determine
** CPU type. CPU rev/model has some ambiguous cases.
*/
- cpu_data[cpunum].fp_rev = coproc_cfg.revision;
- cpu_data[cpunum].fp_model = coproc_cfg.model;
+ per_cpu(cpu_data, cpunum).fp_rev = coproc_cfg.revision;
+ per_cpu(cpu_data, cpunum).fp_model = coproc_cfg.model;
printk(KERN_INFO "FP[%d] enabled: Rev %ld Model %ld\n",
cpunum, coproc_cfg.revision, coproc_cfg.model);
}
/*
- * Display cpu info for all cpu's.
+ * Display CPU info for all CPUs.
*/
int
show_cpuinfo (struct seq_file *m, void *v)
{
- int n;
+ unsigned long cpu;
- for(n=0; n<boot_cpu_data.cpu_count; n++) {
+ for_each_online_cpu(cpu) {
+ const struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
#ifdef CONFIG_SMP
- if (0 == cpu_data[n].hpa)
+ if (0 == cpuinfo->hpa)
continue;
#endif
- seq_printf(m, "processor\t: %d\n"
+ seq_printf(m, "processor\t: %lu\n"
"cpu family\t: PA-RISC %s\n",
- n, boot_cpu_data.family_name);
+ cpu, boot_cpu_data.family_name);
seq_printf(m, "cpu\t\t: %s\n", boot_cpu_data.cpu_name );
boot_cpu_data.cpu_hz / 1000000,
boot_cpu_data.cpu_hz % 1000000 );
+ seq_printf(m, "capabilities\t:");
+ if (boot_cpu_data.pdc.capabilities & PDC_MODEL_OS32)
+ seq_printf(m, " os32");
+ if (boot_cpu_data.pdc.capabilities & PDC_MODEL_OS64)
+ seq_printf(m, " os64");
+ seq_printf(m, "\n");
+
seq_printf(m, "model\t\t: %s\n"
"model name\t: %s\n",
boot_cpu_data.pdc.sys_model_name,
- cpu_data[n].dev ?
- cpu_data[n].dev->name : "Unknown" );
+ cpuinfo->dev ?
+ cpuinfo->dev->name : "Unknown");
seq_printf(m, "hversion\t: 0x%08x\n"
"sversion\t: 0x%08x\n",
show_cache_info(m);
seq_printf(m, "bogomips\t: %lu.%02lu\n",
- cpu_data[n].loops_per_jiffy / (500000 / HZ),
- (cpu_data[n].loops_per_jiffy / (5000 / HZ)) % 100);
+ cpuinfo->loops_per_jiffy / (500000 / HZ),
+ (cpuinfo->loops_per_jiffy / (5000 / HZ)) % 100);
seq_printf(m, "software id\t: %ld\n\n",
boot_cpu_data.pdc.model.sw_id);
return 0;
}
-static struct parisc_device_id processor_tbl[] __read_mostly = {
+static const struct parisc_device_id processor_tbl[] = {
{ HPHW_NPROC, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, SVERSION_ANY_ID },
{ 0, }
};
-static struct parisc_driver cpu_driver __read_mostly = {
+static struct parisc_driver cpu_driver = {
.name = "CPU",
.id_table = processor_tbl,
.probe = processor_probe
};
/**
- * processor_init - Processor initalization procedure.
+ * processor_init - Processor initialization procedure.
*
* Register this driver.
*/
projects / linux-2.6-omap-h63xx.git / blobdiff