]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - arch/mips/txx9/rbtx4927/setup.c
[MIPS] TXx9: Reorganize PCI code
[linux-2.6-omap-h63xx.git] / arch / mips / txx9 / rbtx4927 / setup.c
index df1b6e99b666361accda8f6fc2b04897bd51f88c..86b870abc3198bfde5b17c8075eb1cd8848dbe8c 100644 (file)
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
-#include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <asm/bootinfo.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <asm/txx9tmr.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/txx9/smsc_fdc37m81x.h>
-#endif
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4927.h>
+#include <asm/txx9/tx4938.h>   /* for TX4937 */
 #ifdef CONFIG_SERIAL_TXX9
 #include <linux/serial_core.h>
 #endif
 extern void toshiba_rbtx4927_restart(char *command);
 extern void toshiba_rbtx4927_halt(void);
 extern void toshiba_rbtx4927_power_off(void);
-
-int tx4927_using_backplane = 0;
-
 extern void toshiba_rbtx4927_irq_setup(void);
 
 char *prom_getcmdline(void);
 
-#ifdef CONFIG_PCI
-#undef TX4927_SUPPORT_COMMAND_IO
-#undef  TX4927_SUPPORT_PCI_66
-int tx4927_cpu_clock = 100000000;      /* 100MHz */
-unsigned long mips_pci_io_base;
-unsigned long mips_pci_io_size;
-unsigned long mips_pci_mem_base;
-unsigned long mips_pci_mem_size;
-/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-unsigned long mips_pci_io_pciaddr = 0;
-unsigned long mips_memory_upper;
 static int tx4927_ccfg_toeon = 1;
-static int tx4927_pcic_trdyto = 0;     /* default: disabled */
-unsigned long tx4927_ce_base[8];
-int tx4927_pci66 = 0;          /* 0:auto */
-#endif
 
 char *toshiba_name = "";
 
 #ifdef CONFIG_PCI
-extern struct pci_controller tx4927_controller;
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-                                   int top_bus, int busnr, int devfn)
+static void __init tx4927_pci_setup(void)
 {
-       static struct pci_dev dev;
-       static struct pci_bus bus;
-
-       dev.sysdata = (void *)hose;
-       dev.devfn = devfn;
-       bus.number = busnr;
-       bus.ops = hose->pci_ops;
-       bus.parent = NULL;
-       dev.bus = &bus;
-
-       return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
+       int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB);
+       struct pci_controller *c = &txx9_primary_pcic;
+
+       register_pci_controller(c);
+
+       if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66)
+               txx9_pci_option =
+                       (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+                       TXX9_PCI_OPT_CLK_66; /* already configured */
+
+       /* Reset PCI Bus */
+       writeb(1, rbtx4927_pcireset_addr);
+       /* Reset PCIC */
+       txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+       if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+           TXX9_PCI_OPT_CLK_66)
+               tx4927_pciclk66_setup();
+       mdelay(10);
+       /* clear PCIC reset */
+       txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+       writeb(0, rbtx4927_pcireset_addr);
+       iob();
+
+       tx4927_report_pciclk();
+       tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+       if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+           TXX9_PCI_OPT_CLK_AUTO &&
+           txx9_pci66_check(c, 0, 0)) {
+               /* Reset PCI Bus */
+               writeb(1, rbtx4927_pcireset_addr);
+               /* Reset PCIC */
+               txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+               tx4927_pciclk66_setup();
+               mdelay(10);
+               /* clear PCIC reset */
+               txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+               writeb(0, rbtx4927_pcireset_addr);
+               iob();
+               /* Reinitialize PCIC */
+               tx4927_report_pciclk();
+               tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+       }
 }
 
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, dword, u32)
-
-static int __init tx4927_pcibios_init(void)
+static void __init tx4937_pci_setup(void)
 {
-       unsigned int id;
-       u32 pci_devfn;
-       int devfn_start = 0;
-       int devfn_stop = 0xff;
-       int busno = 0; /* One bus on the Toshiba */
-       struct pci_controller *hose = &tx4927_controller;
-
-       for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) {
-               early_read_config_dword(hose, busno, busno, pci_devfn,
-                                       PCI_VENDOR_ID, &id);
-
-               if (id == 0xffffffff) {
-                       continue;
-               }
-
-               if (id == 0x94601055) {
-                       u8 v08_64;
-                       u32 v32_b0;
-                       u8 v08_e1;
-
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0x64, &v08_64);
-                       early_read_config_dword(hose, busno, busno,
-                                               pci_devfn, 0xb0, &v32_b0);
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0xe1, &v08_e1);
-
-                       /* serial irq control */
-                       v08_64 = 0xd0;
-
-                       /* serial irq pin */
-                       v32_b0 |= 0x00010000;
-
-                       /* ide irq on isa14 */
-                       v08_e1 &= 0xf0;
-                       v08_e1 |= 0x0d;
-
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0x64, v08_64);
-                       early_write_config_dword(hose, busno, busno,
-                                                pci_devfn, 0xb0, v32_b0);
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0xe1, v08_e1);
-               }
-
-               if (id == 0x91301055) {
-                       u8 v08_04;
-                       u8 v08_09;
-                       u8 v08_41;
-                       u8 v08_43;
-                       u8 v08_5c;
-
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0x04, &v08_04);
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0x09, &v08_09);
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0x41, &v08_41);
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0x43, &v08_43);
-                       early_read_config_byte(hose, busno, busno,
-                                              pci_devfn, 0x5c, &v08_5c);
-
-                       /* enable ide master/io */
-                       v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-
-                       /* enable ide native mode */
-                       v08_09 |= 0x05;
-
-                       /* enable primary ide */
-                       v08_41 |= 0x80;
-
-                       /* enable secondary ide */
-                       v08_43 |= 0x80;
-
-                       /*
-                        * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-                        *
-                        * This line of code is intended to provide the user with a work
-                        * around solution to the anomalies cited in SMSC's anomaly sheet
-                        * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
-                        *
-                        * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-                        */
-                       v08_5c |= 0x01;
-
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0x5c, v08_5c);
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0x04, v08_04);
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0x09, v08_09);
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0x41, v08_41);
-                       early_write_config_byte(hose, busno, busno,
-                                               pci_devfn, 0x43, v08_43);
-               }
-
+       int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+       struct pci_controller *c = &txx9_primary_pcic;
+
+       register_pci_controller(c);
+
+       if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+               txx9_pci_option =
+                       (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+                       TXX9_PCI_OPT_CLK_66; /* already configured */
+
+       /* Reset PCI Bus */
+       writeb(1, rbtx4927_pcireset_addr);
+       /* Reset PCIC */
+       txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+       if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+           TXX9_PCI_OPT_CLK_66)
+               tx4938_pciclk66_setup();
+       mdelay(10);
+       /* clear PCIC reset */
+       txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+       writeb(0, rbtx4927_pcireset_addr);
+       iob();
+
+       tx4938_report_pciclk();
+       tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+       if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+           TXX9_PCI_OPT_CLK_AUTO &&
+           txx9_pci66_check(c, 0, 0)) {
+               /* Reset PCI Bus */
+               writeb(1, rbtx4927_pcireset_addr);
+               /* Reset PCIC */
+               txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+               tx4938_pciclk66_setup();
+               mdelay(10);
+               /* clear PCIC reset */
+               txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+               writeb(0, rbtx4927_pcireset_addr);
+               iob();
+               /* Reinitialize PCIC */
+               tx4938_report_pciclk();
+               tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
        }
-
-       register_pci_controller(&tx4927_controller);
-       return 0;
 }
 
-arch_initcall(tx4927_pcibios_init);
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-void __init tx4927_pci_setup(void)
+static int __init rbtx4927_arch_init(void)
 {
-       static int called = 0;
-       extern unsigned int tx4927_get_mem_size(void);
-
-       mips_memory_upper = tx4927_get_mem_size() << 20;
-       mips_memory_upper += KSEG0;
-       mips_pci_io_base = TX4927_PCIIO;
-       mips_pci_io_size = TX4927_PCIIO_SIZE;
-       mips_pci_mem_base = TX4927_PCIMEM;
-       mips_pci_mem_size = TX4927_PCIMEM_SIZE;
-
-       if (!called) {
-               printk
-                   ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-                    toshiba_name,
-                    (unsigned short) (tx4927_pcicptr->pciid >> 16),
-                    (unsigned short) (tx4927_pcicptr->pciid & 0xffff),
-                    (unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
-                    (!(tx4927_ccfgptr->
-                       ccfg & TX4927_CCFG_PCIXARB)) ? "External" :
-                    "Internal");
-               called = 1;
-       }
-       printk("%s PCIC --%s PCICLK:", toshiba_name,
-              (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
-       if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
-               int pciclk = 0;
-               if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-                       switch ((unsigned long) tx4927_ccfgptr->
-                               ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-                       case TX4937_CCFG_PCIDIVMODE_4:
-                               pciclk = tx4927_cpu_clock / 4;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_4_5:
-                               pciclk = tx4927_cpu_clock * 2 / 9;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_5:
-                               pciclk = tx4927_cpu_clock / 5;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_5_5:
-                               pciclk = tx4927_cpu_clock * 2 / 11;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_8:
-                               pciclk = tx4927_cpu_clock / 8;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_9:
-                               pciclk = tx4927_cpu_clock / 9;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_10:
-                               pciclk = tx4927_cpu_clock / 10;
-                               break;
-                       case TX4937_CCFG_PCIDIVMODE_11:
-                               pciclk = tx4927_cpu_clock / 11;
-                               break;
-                       }
-
-               else
-                       switch ((unsigned long) tx4927_ccfgptr->
-                               ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-                       case TX4927_CCFG_PCIDIVMODE_2_5:
-                               pciclk = tx4927_cpu_clock * 2 / 5;
-                               break;
-                       case TX4927_CCFG_PCIDIVMODE_3:
-                               pciclk = tx4927_cpu_clock / 3;
-                               break;
-                       case TX4927_CCFG_PCIDIVMODE_5:
-                               pciclk = tx4927_cpu_clock / 5;
-                               break;
-                       case TX4927_CCFG_PCIDIVMODE_6:
-                               pciclk = tx4927_cpu_clock / 6;
-                               break;
-                       }
-
-               printk("Internal(%dMHz)", pciclk / 1000000);
-       } else
-               printk("External");
-       printk("\n");
-
-       /* GB->PCI mappings */
-       tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4;
-       tx4927_pcicptr->g2piogbase = mips_pci_io_base |
-#ifdef __BIG_ENDIAN
-           TX4927_PCIC_G2PIOGBASE_ECHG
-#else
-           TX4927_PCIC_G2PIOGBASE_BSDIS
-#endif
-           ;
-
-       tx4927_pcicptr->g2piopbase = 0;
-
-       tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4;
-       tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base |
-#ifdef __BIG_ENDIAN
-           TX4927_PCIC_G2PMnGBASE_ECHG
-#else
-           TX4927_PCIC_G2PMnGBASE_BSDIS
-#endif
-           ;
-       tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base;
-
-       tx4927_pcicptr->g2pmmask[1] = 0;
-       tx4927_pcicptr->g2pmgbase[1] = 0;
-       tx4927_pcicptr->g2pmpbase[1] = 0;
-       tx4927_pcicptr->g2pmmask[2] = 0;
-       tx4927_pcicptr->g2pmgbase[2] = 0;
-       tx4927_pcicptr->g2pmpbase[2] = 0;
-
-
-       /* PCI->GB mappings (I/O 256B) */
-       tx4927_pcicptr->p2giopbase = 0; /* 256B */
-
-       /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */
-       tx4927_pcicptr->p2gm0plbase = 0;
-       tx4927_pcicptr->p2gm0pubase = 0;
-       tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-           TX4927_PCIC_P2GMnGBASE_TECHG
-#else
-           TX4927_PCIC_P2GMnGBASE_TBSDIS
-#endif
-           ;
-
-       /* PCI->GB mappings (MEM 16MB) -not used */
-       tx4927_pcicptr->p2gm1plbase = 0xffffffff;
-       tx4927_pcicptr->p2gm1pubase = 0xffffffff;
-       tx4927_pcicptr->p2gmgbase[1] = 0;
-
-       /* PCI->GB mappings (MEM 1MB) -not used */
-       tx4927_pcicptr->p2gm2pbase = 0xffffffff;
-       tx4927_pcicptr->p2gmgbase[2] = 0;
-
-
-       /* Enable Initiator Memory 0 Space, I/O Space, Config */
-       tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK;
-       tx4927_pcicptr->pciccfg |=
-           TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE |
-           TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR;
-
-
-       /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-       tx4927_pcicptr->pcicfg1 = 0;
-
-       if (tx4927_pcic_trdyto >= 0) {
-               tx4927_pcicptr->g2ptocnt &= ~0xff;
-               tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff);
-       }
-
-       /* Clear All Local Bus Status */
-       tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL;
-       /* Enable All Local Bus Interrupts */
-       tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL;
-       /* Clear All Initiator Status */
-       tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL;
-       /* Enable All Initiator Interrupts */
-       tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL;
-       /* Clear All PCI Status Error */
-       tx4927_pcicptr->pcistatus =
-           (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-           (TX4927_PCIC_PCISTATUS_ALL << 16);
-       /* Enable All PCI Status Error Interrupts */
-       tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL;
-
-       /* PCIC Int => IRC IRQ16 */
-       tx4927_pcicptr->pcicfg2 =
-           (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC;
-
-       if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) {
-               /* XXX */
-       } else {
-               /* Reset Bus Arbiter */
-               tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA;
-               /* Enable Bus Arbiter */
-               tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN;
-       }
-
-       tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER |
-           PCI_COMMAND_MEMORY |
-           PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+       if (mips_machtype == MACH_TOSHIBA_RBTX4937)
+               tx4937_pci_setup();
+       else
+               tx4927_pci_setup();
+       return 0;
 }
+arch_initcall(rbtx4927_arch_init);
 #endif /* CONFIG_PCI */
 
 static void __noreturn wait_forever(void)
@@ -479,8 +239,6 @@ void __init plat_mem_setup(void)
        cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
        write_c0_config(cp0_config);
 
-       set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET);
-
        ioport_resource.end = 0xffffffff;
        iomem_resource.end = 0xffffffff;
 
@@ -492,8 +250,13 @@ void __init plat_mem_setup(void)
                txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
 
 #ifdef CONFIG_PCI
+       txx9_alloc_pci_controller(&txx9_primary_pcic,
+                                 RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
+                                 RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+#else
+       set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
+#endif
 
-       /* PCIC */
        /*
           * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
           *
@@ -517,58 +280,38 @@ void __init plat_mem_setup(void)
           *
         */
        if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-               switch ((unsigned long)tx4927_ccfgptr->
-                       ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-               case TX4937_CCFG_PCIDIVMODE_8:
-               case TX4937_CCFG_PCIDIVMODE_4:
-                       tx4927_cpu_clock = 266666666;   /* 266MHz */
+               switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
+                       TX4938_CCFG_PCIDIVMODE_MASK) {
+               case TX4938_CCFG_PCIDIVMODE_8:
+               case TX4938_CCFG_PCIDIVMODE_4:
+                       txx9_cpu_clock = 266666666;     /* 266MHz */
                        break;
-               case TX4937_CCFG_PCIDIVMODE_9:
-               case TX4937_CCFG_PCIDIVMODE_4_5:
-                       tx4927_cpu_clock = 300000000;   /* 300MHz */
+               case TX4938_CCFG_PCIDIVMODE_9:
+               case TX4938_CCFG_PCIDIVMODE_4_5:
+                       txx9_cpu_clock = 300000000;     /* 300MHz */
                        break;
                default:
-                       tx4927_cpu_clock = 333333333;   /* 333MHz */
+                       txx9_cpu_clock = 333333333;     /* 333MHz */
                }
        else
-               switch ((unsigned long)tx4927_ccfgptr->
-                       ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
+               switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
+                       TX4927_CCFG_PCIDIVMODE_MASK) {
                case TX4927_CCFG_PCIDIVMODE_2_5:
                case TX4927_CCFG_PCIDIVMODE_5:
-                       tx4927_cpu_clock = 166666666;   /* 166MHz */
+                       txx9_cpu_clock = 166666666;     /* 166MHz */
                        break;
                default:
-                       tx4927_cpu_clock = 200000000;   /* 200MHz */
+                       txx9_cpu_clock = 200000000;     /* 200MHz */
                }
+       /* change default value to udelay/mdelay take reasonable time */
+       loops_per_jiffy = txx9_cpu_clock / HZ / 2;
 
        /* CCFG */
        /* do reset on watchdog */
-       tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR;
+       tx4927_ccfg_set(TX4927_CCFG_WR);
        /* enable Timeout BusError */
        if (tx4927_ccfg_toeon)
-               tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
-
-       tx4927_pci_setup();
-       if (tx4927_using_backplane == 1)
-               printk("backplane board IS installed\n");
-       else
-               printk("No Backplane \n");
-
-       /* this is on ISA bus behind PCI bus, so need PCI up first */
-#ifdef CONFIG_TOSHIBA_FPCIB0
-       if (tx4927_using_backplane) {
-               smsc_fdc37m81x_init(0x3f0);
-               smsc_fdc37m81x_config_beg();
-               smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
-                                         SMSC_FDC37M81X_KBD);
-               smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
-               smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
-               smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
-                                         1);
-               smsc_fdc37m81x_config_end();
-       }
-#endif
-#endif /* CONFIG_PCI */
+               tx4927_ccfg_set(TX4927_CCFG_TOE);
 
 #ifdef CONFIG_SERIAL_TXX9
        {
@@ -611,8 +354,8 @@ void __init plat_mem_setup(void)
 
 void __init plat_time_init(void)
 {
-       mips_hpt_frequency = tx4927_cpu_clock / 2;
-       if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS)
+       mips_hpt_frequency = txx9_cpu_clock / 2;
+       if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
                txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
                                     TXX9_IRQ_BASE + 17,
                                     50000000);