#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
-#include <linux/clk.h>
#include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
#include <asm/reboot.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
#include <asm/mipsregs.h>
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
{
+ local_irq_disable();
#if 1 /* Resetting PCI bus */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
#endif
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
+ /* fallback */
+ (*_machine_halt)();
}
-static void jmr3927_machine_restart(char *command)
-{
- local_irq_disable();
- puts("Rebooting...");
- do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
- puts("JMR-TX3927 halted.\n");
- while (1);
-}
-
-static void jmr3927_machine_power_off(void)
+static void __init jmr3927_time_init(void)
{
- puts("JMR-TX3927 halted. Please turn off the power.\n");
- while (1);
-}
-
-void __init plat_time_init(void)
-{
- txx9_clockevent_init(TX3927_TMR_REG(0),
- TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
- JMR3927_IMCLK);
- txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+ tx3927_time_init(0, 1);
}
#define DO_WRITE_THROUGH
#define DO_ENABLE_CACHE
-extern char * __init prom_getcmdline(void);
static void jmr3927_board_init(void);
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-void __init plat_mem_setup(void)
+static void __init jmr3927_mem_setup(void)
{
char *argptr;
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
_machine_restart = jmr3927_machine_restart;
- _machine_halt = jmr3927_machine_halt;
- pm_power_off = jmr3927_machine_power_off;
-
- /*
- * IO/MEM resources.
- */
- ioport_resource.start = pci_io_resource.start;
- ioport_resource.end = pci_io_resource.end;
- iomem_resource.start = 0;
- iomem_resource.end = 0xffffffff;
-
- /* Reboot on panic */
- panic_timeout = 180;
/* cache setup */
{
#endif
conf = read_c0_conf();
- conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+ conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+ TX39_CONF_WBON | TX39_CONF_CWFON);
conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
/* initialize board */
jmr3927_board_init();
- argptr = prom_getcmdline();
-
- if ((argptr = strstr(argptr, "toeon")) != NULL)
- jmr3927_ccfg_toeon = 1;
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "ip=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " ip=bootp");
- }
-
-#ifdef CONFIG_SERIAL_TXX9
- {
- extern int early_serial_txx9_setup(struct uart_port *port);
- int i;
- struct uart_port req;
- for(i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
- req.mapbase = TX3927_SIO_REG(i);
- req.irq = i == 0 ?
- JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
- if (i == 0)
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = JMR3927_IMCLK;
- early_serial_txx9_setup(&req);
- }
- }
+ tx3927_setup_serial(1 << 1); /* ch1: noCTS */
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=")) == NULL) {
- argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
strcat(argptr, " console=ttyS1,115200");
- }
-#endif
#endif
}
-static void tx3927_setup(void);
-
-static void __init jmr3927_board_init(void)
+static void __init jmr3927_pci_setup(void)
{
- tx3927_setup();
-
- /* SIO0 DTR on */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
- jmr3927_led_set(0);
-
- printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
- jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
- jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
- jmr3927_dipsw1(), jmr3927_dipsw2(),
- jmr3927_dipsw3(), jmr3927_dipsw4());
+#ifdef CONFIG_PCI
+ int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB);
+ struct pci_controller *c;
+
+ c = txx9_alloc_pci_controller(&txx9_primary_pcic,
+ JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE,
+ JMR3927_PCIIO, JMR3927_PCIIO_SIZE);
+ register_pci_controller(c);
+ if (!extarb) {
+ /* Reset PCI Bus */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ udelay(100);
+ jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
+ JMR3927_IOC_RESET_ADDR);
+ udelay(100);
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ }
+ tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+ tx3927_setup_pcierr_irq();
+#endif /* CONFIG_PCI */
}
-static void __init tx3927_setup(void)
+static void __init jmr3927_board_init(void)
{
- int i;
-#ifdef CONFIG_PCI
- unsigned long mips_pci_io_base = JMR3927_PCIIO;
- unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
- unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
- unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
- /* for legacy I/O, PCI I/O PCI Bus address must be 0 */
- unsigned long mips_pci_io_pciaddr = 0;
-#endif
-
+ txx9_cpu_clock = JMR3927_CORECLK;
/* SDRAMC are configured by PROM */
/* ROMC */
tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
- /* CCFG */
- /* enable Timeout BusError */
- if (jmr3927_ccfg_toeon)
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
- /* clear BusErrorOnWrite flag */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
- /* Disable PCI snoop */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
- /* do reset on watchdog */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
- /* Enable PCI SNOOP - with write through only */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
/* Pin selection */
tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
tx3927_ccfgptr->pcfg |=
TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
- printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
- tx3927_ccfgptr->crir,
- tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
- /* TMR */
- for (i = 0; i < TX3927_NR_TMR; i++)
- txx9_tmr_init(TX3927_TMR_REG(i));
-
- /* DMA */
- tx3927_dmaptr->mcr = 0;
- for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
- /* reset channel */
- tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
- tx3927_dmaptr->ch[i].ccr = 0;
- }
- /* enable DMA */
-#ifdef __BIG_ENDIAN
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
-
-#ifdef CONFIG_PCI
- /* PCIC */
- printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
- tx3927_pcicptr->did, tx3927_pcicptr->vid,
- tx3927_pcicptr->rid);
- if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
- printk("External\n");
- /* XXX */
- } else {
- printk("Internal\n");
-
- /* Reset PCI Bus */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- udelay(100);
- jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
- JMR3927_IOC_RESET_ADDR);
- udelay(100);
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-
- /* Disable External PCI Config. Access */
- tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
-#ifdef __BIG_ENDIAN
- tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
- TX3927_PCIC_LBC_TIBSE |
- TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
-#endif
- /* LB->PCI mappings */
- tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
- tx3927_pcicptr->ilbioma = mips_pci_io_base;
- tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
- tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
- tx3927_pcicptr->ilbmma = mips_pci_mem_base;
- tx3927_pcicptr->ipbmma = mips_pci_mem_base;
- /* PCI->LB mappings */
- tx3927_pcicptr->iobas = 0xffffffff;
- tx3927_pcicptr->ioba = 0;
- tx3927_pcicptr->tlbioma = 0;
- tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
- tx3927_pcicptr->mba = 0;
- tx3927_pcicptr->tlbmma = 0;
- /* Enable Direct mapping Address Space Decoder */
- tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-
- /* Clear All Local Bus Status */
- tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
- /* Enable All Local Bus Interrupts */
- tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
- /* Clear All PCI Status Error */
- tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
- /* Enable All PCI Status Error Interrupts */
- tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
-
- /* PCIC Int => IRC IRQ10 */
- tx3927_pcicptr->il = TX3927_IR_PCI;
- /* Target Control (per errata) */
- tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-
- /* Enable Bus Arbiter */
- tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
-
- tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_IO |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- }
-#endif /* CONFIG_PCI */
+ tx3927_setup();
- /* PIO */
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);
- __raw_writel(0, &tx3927_pioptr->maskcpu);
- __raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
gpio_request(11, "dipsw1");
gpio_request(10, "dipsw2");
- {
- unsigned int conf;
- conf = read_c0_conf();
- if (!(conf & TX39_CONF_ICE))
- printk("TX3927 I-Cache disabled.\n");
- if (!(conf & TX39_CONF_DCE))
- printk("TX3927 D-Cache disabled.\n");
- else if (!(conf & TX39_CONF_WBON))
- printk("TX3927 D-Cache WriteThrough.\n");
- else if (!(conf & TX39_CONF_CWFON))
- printk("TX3927 D-Cache WriteBack.\n");
- else
- printk("TX3927 D-Cache WriteBack (CWF) .\n");
- }
+ jmr3927_pci_setup();
+
+ /* SIO0 DTR on */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+ jmr3927_led_set(0);
+
+ printk(KERN_INFO
+ "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+ jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_dipsw1(), jmr3927_dipsw2(),
+ jmr3927_dipsw3(), jmr3927_dipsw4());
}
/* This trick makes rtc-ds1742 driver usable as is. */
-unsigned long __swizzle_addr_b(unsigned long port)
+static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
{
if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
return port;
return port | 1;
#endif
}
-EXPORT_SYMBOL(__swizzle_addr_b);
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
{
static struct resource __initdata res = {
.start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
.end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev;
- dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
-device_initcall(jmr3927_rtc_init);
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
+static void __init jmr3927_device_init(void)
{
- return txx9_wdt_init(TX3927_TMR_REG(2));
+ __swizzle_addr_b = jmr3927_swizzle_addr_b;
+ jmr3927_rtc_init();
+ tx3927_wdt_init();
}
-device_initcall(jmr3927_wdt_init);
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "imbus_clk"))
- return (struct clk *)JMR3927_IMCLK;
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
+struct txx9_board_vec jmr3927_vec __initdata = {
+ .system = "Toshiba JMR_TX3927",
+ .prom_init = jmr3927_prom_init,
+ .mem_setup = jmr3927_mem_setup,
+ .irq_setup = jmr3927_irq_setup,
+ .time_init = jmr3927_time_init,
+ .device_init = jmr3927_device_init,
+#ifdef CONFIG_PCI
+ .pci_map_irq = jmr3927_pci_map_irq,
+#endif
+};