]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - arch/mips/txx9/generic/setup.c
[MIPS] TXx9: Fix mips_hpt_frequency initialization
[linux-2.6-omap-h63xx.git] / arch / mips / txx9 / generic / setup.c
index 7b5705d18deb72ed165f7dd02be69502a6b18862..0afe94c48fb65e82ee283f5fbd2fbce6362dcdb9 100644 (file)
@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
@@ -220,6 +221,87 @@ void __init txx9_wdt_init(unsigned long base)
        platform_device_register_simple("txx9wdt", -1, &res, 1);
 }
 
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+       struct resource res[] = {
+               {
+                       .start  = base,
+                       .end    = base + 0x20 - 1,
+                       .flags  = IORESOURCE_MEM,
+               }, {
+                       .start  = irq,
+                       .flags  = IORESOURCE_IRQ,
+               },
+       };
+       platform_device_register_simple("spi_txx9", busid,
+                                       res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+       struct platform_device *pdev =
+               platform_device_alloc("tc35815-mac", id);
+       if (!pdev ||
+           platform_device_add_data(pdev, ethaddr, 6) ||
+           platform_device_add(pdev))
+               platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+                         unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+       struct uart_port req;
+
+       memset(&req, 0, sizeof(req));
+       req.line = line;
+       req.iotype = UPIO_MEM;
+       req.membase = ioremap(baseaddr, 0x24);
+       req.mapbase = baseaddr;
+       req.irq = irq;
+       if (!nocts)
+               req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+       if (sclk) {
+               req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+               req.uartclk = sclk;
+       } else
+               req.uartclk = TXX9_IMCLK;
+       early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+       txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR    0x0c
+#define TXX9_SITFIFO   0x1c
+#define TXX9_SICISR_TXALS      0x00000002
+       while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+                TXX9_SICISR_TXALS))
+               ;
+       __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+       early_txx9_sio_port = ioremap(baseaddr, 0x24);
+       txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
@@ -246,6 +328,9 @@ void __init arch_init_irq(void)
 
 void __init plat_time_init(void)
 {
+#ifdef CONFIG_CPU_TX49XX
+       mips_hpt_frequency = txx9_cpu_clock / 2;
+#endif
        txx9_board_vec->time_init();
 }